From 3a35adffb745d1d44db25576598ce1d012490180 Mon Sep 17 00:00:00 2001 From: Stefan Rueger Date: Thu, 15 Aug 2024 22:44:15 +0100 Subject: [PATCH] Add avrdude.1 docu for pickit5_updi --- src/avrdude.1 | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/src/avrdude.1 b/src/avrdude.1 index 29edd9f0..8e53e6b1 100644 --- a/src/avrdude.1 +++ b/src/avrdude.1 @@ -245,6 +245,7 @@ The Curiosity Nano board is supported in UPDI mode. It is dubbed .Dq PICkit on Board , thus the name .Pa pkobn_updi . +The MPLAB(R) PICkit 5 is currently only supported in UPDI mode. .Pp SerialUPDI programmer implementation is based on Microchip's .Em pymcuprog Li https://github.com/microchip-pic-avr-tools/pymcuprog @@ -1756,6 +1757,23 @@ for switching to PIC mode. .It Ar help Show help menu and exit. .El +.It Ar PICkit 5 +.It Ar PICkit 4 (PIC mode) +.Bl -tag -offset indent -width indent +.It Ar vtarg= +Specify a voltage between 1.8 and 5.5 V that the programmer should supply +to the target. If there is already a valid voltage applied to the VTG Pin, +this setting will be ignored. When AVRDUDE detects an external voltage outside +of this range, it will terminate the operation. You can disable this by +setting the voltage to 0 V. +.It Ar hvupdi +High-voltage UPDI programming is used to enable a UPDI pin that has previously +been set to RESET or GPIO mode. Use -x hvupdi to enable high-voltage UPDI +initialization for supported targets. Depending on the target, the HV pulse will +be applied either on the RST pin, or the UPDI pin. +.It Ar help +Show help menu and exit. +.El .It Ar Xplained Mini (ISP and UPDI) .Bl -tag -offset indent -width indent .It Ar suffer=VALUE, suffer