diff --git a/doc/release/RK3566_CN.md b/doc/release/RK3566_CN.md index bc5987f4..46cdb5e1 100644 --- a/doc/release/RK3566_CN.md +++ b/doc/release/RK3566_CN.md @@ -10,8 +10,8 @@ | Index | 重要程度 | 更新说明 | 问题现象 | 问题来源 | | ----- | -------- | ------------------------------ | ------------------------------------------------------------ | -------- | -| 1 | 普通 | 解决部分颗粒timing设置错误问题 | t_xs_x32, t_xs_abort_x32 和t_xs_fast_x32这三个timing设置有误，其他平台上发现小容量颗粒(小于128M）上会引起异常。 | 无 | -| 2 | 重要 | DDR4 528M稳定性问题 | 个别颗粒528M下无法开启DLL，需要做关闭DLL处理. | 无 | +| 1 | 普通 | 解决部分颗粒timing设置错误问题 | t_xs_x32, t_xs_abort_x32 和t_xs_fast_x32这三个timing设置有误，其他平台上发现小容量颗粒(小于128M）上会引起异常。 | - | +| 2 | 重要 | DDR4 528M稳定性问题 | 个别颗粒528M下无法开启DLL，需要做关闭DLL处理. | - | ------ diff --git a/doc/release/RK3566_EN.md b/doc/release/RK3566_EN.md index 72a51289..a51874b3 100644 --- a/doc/release/RK3566_EN.md +++ b/doc/release/RK3566_EN.md @@ -1,4 +1,4 @@ -# RK3566Release Note +# RK3566 Release Note ## rk3566_ddr_{1056...324}MHz_v1.14.bin @@ -10,7 +10,7 @@ | Index | Severity | Update | Issue description | Issue source | | ----- | --------- | --------------------------------------------------------- | ------------------------------------------------------------ | ------------ | -| 1 | moderate | fix Fix set of t_xs_x32, t_xs_abort_x32 and t_xs_fast_x32 | Fix set of t_xs_x32, t_xs_abort_x32 and t_xs_fast_x32.This bug may lead to some low density dram(128M) fail. | none | -| 2 | important | fix ddr4 528M stability problem | some DRAM DLL can't lock at 528M，DLL should be bypass for 528M | none | +| 1 | moderate | fix Fix set of t_xs_x32, t_xs_abort_x32 and t_xs_fast_x32 | Fix set of t_xs_x32, t_xs_abort_x32 and t_xs_fast_x32.This bug may lead to some low density dram(128M) fail. | - | +| 2 | important | fix ddr4 528M stability problem | some DRAM DLL can't lock at 528M，DLL should be bypass for 528M | - | ------ diff --git a/doc/release/RK3568_CN.md b/doc/release/RK3568_CN.md index 93ca2abc..a6431a62 100644 --- a/doc/release/RK3568_CN.md +++ b/doc/release/RK3568_CN.md @@ -10,10 +10,10 @@ | Index | 重要程度 | 更新说明 | 问题现象 | 问题来源 | | ----- | -------- | ----------------------------------- | ------------------------------------------------------------ | -------- | -| 1 | 重要 | 解决个别LPDDR4颗粒无法运行到1560MHz | 长鑫CXDB5CCAM-MK LPDDR4模式下1560MHz无法运行的问题，将CLK/CA sr改为0后ok。 | 无 | -| 2 | 普通 | 解决部分颗粒timing设置错误问题 | t_xs_x32, t_xs_abort_x32 和t_xs_fast_x32这三个timing设置有误，其他平台上发现小容量颗粒(小于128M）上会引起异常。 | 无 | -| 3 | 重要 | DDR4 528M稳定性问题 | 个别颗粒528M下无法开启DLL，需要做关闭DLL处理. | 无 | -| 4 | 重要 | DDR4 1560M稳定性问题 | 部分2rank DDR4 PCB需要将DQS/DQ slew rate 加强到0x0才能稳定运行1560M | 无 | +| 1 | 重要 | 解决个别LPDDR4颗粒无法运行到1560MHz | 长鑫CXDB5CCAM-MK LPDDR4模式下1560MHz无法运行的问题，将CLK/CA sr改为0后ok。 | - | +| 2 | 普通 | 解决部分颗粒timing设置错误问题 | t_xs_x32, t_xs_abort_x32 和t_xs_fast_x32这三个timing设置有误，其他平台上发现小容量颗粒(小于128M）上会引起异常。 | - | +| 3 | 重要 | DDR4 528M稳定性问题 | 个别颗粒528M下无法开启DLL，需要做关闭DLL处理. | - | +| 4 | 重要 | DDR4 1560M稳定性问题 | 部分2rank DDR4 PCB需要将DQS/DQ slew rate 加强到0x0才能稳定运行1560M | - | ------ diff --git a/doc/release/RK3568_EN.md b/doc/release/RK3568_EN.md index f0465669..39be0bc8 100644 --- a/doc/release/RK3568_EN.md +++ b/doc/release/RK3568_EN.md @@ -1,4 +1,4 @@ -# RK3568Release Note +# RK3568 Release Note ## rk3568_ddr_{1560...324}MHz_v1.14.bin @@ -10,9 +10,9 @@ | Index | Severity | Update | Issue description | Issue source | | ----- | --------- | --------------------------------------------------------- | ------------------------------------------------------------ | ------------ | -| 1 | important | fix some LPDDR4 stability problem | CXMT CXDB5CCAM-MK instability for 1560MHz at LPDDR4 mode. Fix this issue by set CLK/CA slew rate from 0xf to 0x0 . | none | -| 2 | moderate | fix Fix set of t_xs_x32, t_xs_abort_x32 and t_xs_fast_x32 | Fix set of t_xs_x32, t_xs_abort_x32 and t_xs_fast_x32.This bug may lead to some low density dram(128M) fail. | none | -| 3 | important | fix ddr4 528M stability problem | some DRAM DLL can't lock at 528M，DLL should be bypass for 528M | none | -| | important | fix ddr4 1560M stability problem | some 2 rank DDR4 PCB DQS/DQ slew rate should be set to 0x0 when running at1560MHz. | none | +| 1 | important | fix some LPDDR4 stability problem | CXMT CXDB5CCAM-MK instability for 1560MHz at LPDDR4 mode. Fix this issue by set CLK/CA slew rate from 0xf to 0x0 . | - | +| 2 | moderate | fix Fix set of t_xs_x32, t_xs_abort_x32 and t_xs_fast_x32 | Fix set of t_xs_x32, t_xs_abort_x32 and t_xs_fast_x32.This bug may lead to some low density dram(128M) fail. | - | +| 3 | important | fix ddr4 528M stability problem | some DRAM DLL can't lock at 528M，DLL should be bypass for 528M | - | +| | important | fix ddr4 1560M stability problem | some 2 rank DDR4 PCB DQS/DQ slew rate should be set to 0x0 when running at1560MHz. | - | ------ diff --git a/doc/release/RV1106_CN.md b/doc/release/RV1106_CN.md index 346fdb4d..0d3b6c81 100644 --- a/doc/release/RV1106_CN.md +++ b/doc/release/RV1106_CN.md @@ -10,9 +10,9 @@ | Index | 重要程度 | 更新说明 | 问题现象 | 问题来源 | | ----- | -------- | --------------------------- | ------------------------------------------------------------ | -------- | -| 1 | 重要 | 修复1.40引入的BUG | 当编码器启动双码流后，MCU概率性无法判断卷绕帧结束，主码流卡死 | 自测 | -| 2 | 重要 | 修复加载MCU固件引起的冲内存 | 在加载MCU固件之前直接RESET RISCV会导致冲内存。 | 客户现场 | -| 3 | 重要 | OVERFLOW无法丢帧 | 如果编码器启动太慢，MCU报OVERFLOW，但编码器无法丢帧引起超时复位。 | 客户现场 | +| 1 | 重要 | 修复1.40引入的BUG | 当编码器启动双码流后，MCU概率性无法判断卷绕帧结束，主码流卡死 | - | +| 2 | 重要 | 修复加载MCU固件引起的冲内存 | 在加载MCU固件之前直接RESET RISCV会导致冲内存。 | - | +| 3 | 重要 | OVERFLOW无法丢帧 | 如果编码器启动太慢，MCU报OVERFLOW，但编码器无法丢帧引起超时复位。 | - | --- @@ -35,8 +35,8 @@ | Index | 重要程度 | 更新说明 | 问题现象 | 问题来源 | | ----- | -------- | ------------------------------------------------------------ | ------------------------------------------------ | -------- | -| 1 | 重要 | 解决thread:tidle stack overflow的问题 | 概率出现thread:tidle stack overflow，rtt异常退出 | 无 | -| 2 | 重要 | 从iq bin中读取ae标定参数 | ae标定数据 不生效 | 无 | -| 3 | 重要 | 解决暗环境AIQ启动后去噪锐化效果变化及亮度变暗的问题 | 暗环境下内核阶段和aiq不平滑的衔接 | 无 | -| 4 | 紧急 | 解决全参图像效果问题，需要与AIQ提交0ed3f415d3相匹配，否则图像会变绿 | 全参图像效果异常 | 无 | +| 1 | 重要 | 解决thread:tidle stack overflow的问题 | 概率出现thread:tidle stack overflow，rtt异常退出 | - | +| 2 | 重要 | 从iq bin中读取ae标定参数 | ae标定数据 不生效 | - | +| 3 | 重要 | 解决暗环境AIQ启动后去噪锐化效果变化及亮度变暗的问题 | 暗环境下内核阶段和aiq不平滑的衔接 | - | +| 4 | 紧急 | 解决全参图像效果问题，需要与AIQ提交0ed3f415d3相匹配，否则图像会变绿 | 全参图像效果异常 | - | diff --git a/doc/release/RV1106_EN.md b/doc/release/RV1106_EN.md index fdce9a9b..2fc6ff7f 100644 --- a/doc/release/RV1106_EN.md +++ b/doc/release/RV1106_EN.md @@ -8,11 +8,11 @@ ### Fixed -| Index | Severity | Update | Issue description | Issue source | -| ----- | --------- | --------------------------------------------------------- | ------------------------------------------------------------ | ------------------------ | -| 1 | important | repair the bug of v1.40 cause | after venc start double stream，mcu maube can not check wrap frame end，casuse main stream off | self test | -| 2 | important | repair the bug destory memory when reset working mcu | when mcu is working, if it is reset will destory system memory | Customer on-site support | -| 3 | important | mcu check overflow, bug venc can not lost the error frame | if venc start too slow, mcu will make a overflow event to venc, but venc can not lost the error frame | Customer on-site support | +| Index | Severity | Update | Issue description | Issue source | +| ----- | --------- | --------------------------------------------------------- | ------------------------------------------------------------ | ------------ | +| 1 | important | repair the bug of v1.40 cause | after venc start double stream，mcu maube can not check wrap frame end，casuse main stream off | - | +| 2 | important | repair the bug destory memory when reset working mcu | when mcu is working, if it is reset will destory system memory | - | +| 3 | important | mcu check overflow, bug venc can not lost the error frame | if venc start too slow, mcu will make a overflow event to venc, but venc can not lost the error frame | - | --- @@ -35,7 +35,7 @@ | Index | Severity | Update | Issue description | Issue source | | ----- | --------- | ------------------------------------------------------------ | ------------------------------------------------------------ | ------------ | -| 1 | important | resolve "thread:tidle stack overflow" problem | Sometimes "Thread: Tidle Stack Overflow" is displayed. RTT exits abnormally | none | -| 2 | important | Suppore get AE calibration parameters from iq bin | AE calibration data is not vaild. | none | -| 3 | important | To solve the problem of the change of denoising and sharpening effect and the dimming of brightness after AIQ startup in dark environment | The connection between kernel phase and aiq is not smooth in dark environment | none | -| 4 | critical | To solve the problem of full-parameter image effect, it needs to match the AIQ submission 0ed3f415d3, otherwise the image will turn green | the image effect is abnormal in full-parameter | none | +| 1 | important | resolve "thread:tidle stack overflow" problem | Sometimes "Thread: Tidle Stack Overflow" is displayed. RTT exits abnormally | - | +| 2 | important | Suppore get AE calibration parameters from iq bin | AE calibration data is not vaild. | - | +| 3 | important | To solve the problem of the change of denoising and sharpening effect and the dimming of brightness after AIQ startup in dark environment | The connection between kernel phase and aiq is not smooth in dark environment | - | +| 4 | critical | To solve the problem of full-parameter image effect, it needs to match the AIQ submission 0ed3f415d3, otherwise the image will turn green | the image effect is abnormal in full-parameter | - |