Merge branch 'master' of git://www.denx.de/git/u-boot-imx

include/configs/mx53loco.h

@@ -24,6 +24,8 @@
 
 #define CONFIG_SYS_GENERIC_BOARD
 
+#define CONFIG_DISPLAY_CPUINFO
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 

include/configs/mx6sabre_common.h

@@ -53,6 +53,8 @@
 #define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
@@ -276,4 +278,18 @@
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
+#define CONFIG_CI_UDC
+#define CONFIG_USBD_HS
+#define CONFIG_USB_GADGET_DUALSPEED
+
+#define CONFIG_USB_GADGET
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW	2
+
+#define CONFIG_G_DNL_VENDOR_NUM		0x0525
+#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
+#define CONFIG_G_DNL_MANUFACTURER	"FSL"
+
 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */

include/configs/mx6slevk.h

@@ -48,6 +48,18 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED		  100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
+
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII

include/configs/ot1200.h

@@ -131,6 +131,16 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_SMSC
 
+#ifndef CONFIG_SPL
+#define CONFIG_CMD_EEPROM
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_BUS             1
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN        1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#endif
+
 /* Miscellaneous commands */
 #define CONFIG_CMD_BMODE
 #define CONFIG_CMD_SETEXPR

include/configs/tbs2910.h

@@ -165,6 +165,19 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB_MASS_STORAGE
+#ifdef CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_CI_UDC
+#define CONFIG_USBD_HS
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW	0
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_G_DNL_VENDOR_NUM		0x0525
+#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
+#define CONFIG_G_DNL_MANUFACTURER	"TBS"
+#endif /* CONFIG_CMD_USB_MASS_STORAGE */
 #define CONFIG_USB_KEYBOARD
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE

include/configs/warp.h

@@ -0,0 +1,228 @@
+/*
+ * Copyright (C) 2014 O.S. Systems Software LTDA.
+ * Copyright (C) 2014 Kynetics LLC.
+ * Copyright (C) 2014 Revolution Robotics, Inc.
+ *
+ * Author: Otavio Salvador <otavio@ossystems.com.br>
+ *
+ * Configuration settings for the WaRP Board
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
+#include "mx6_common.h"
+
+#define CONFIG_MX6
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
+
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+/* Command definition */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+#define CONFIG_BOOTDELAY		3
+
+#define CONFIG_LOADADDR			0x82000000
+#define CONFIG_SYS_TEXT_BASE		0x87800000
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE		256
+
+/* Watchdog */
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_IMX_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 /* 30s */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + SZ_256M)
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_STACKSIZE		SZ_128K
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+#define PHYS_SDRAM_SIZE			SZ_512M
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_ENV_OFFSET		(6 * SZ_64K)
+#define CONFIG_ENV_SIZE			SZ_8K
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0
+
+/* VDD voltage 1.65 - 1.95 */
+#define CONFIG_SYS_SD_VOLTAGE		0x00000080
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+/* USB Configs */
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS		0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	1 /* Only OTG2 port enabled */
+#endif
+
+#define CONFIG_CI_UDC
+#define CONFIG_USBD_HS
+#define CONFIG_USB_GADGET_DUALSPEED
+
+#define CONFIG_USB_GADGET
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW	2
+
+#define CONFIG_G_DNL_VENDOR_NUM		0x0525
+#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
+#define CONFIG_G_DNL_MANUFACTURER	"FSL"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"script=boot.scr\0" \
+	"image=zImage\0" \
+	"console=ttymxc0\0" \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"fdt_file=imx6sl-warp.dtb\0" \
+	"fdt_addr=0x88000000\0" \
+	"initrd_addr=0x83800000\0" \
+	"boot_fdt=try\0" \
+	"ip_dyn=yes\0" \
+	"mmcdev=0\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=${mmcroot}\0" \
+	"loadbootscript=" \
+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0" \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/nfs " \
+	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+		"netboot=echo Booting from net ...; " \
+		"run netargs; " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${image}; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+	   "mmc dev ${mmcdev};" \
+	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "if run loadbootscript; then " \
+			   "run bootscript; " \
+		   "else " \
+			   "if run loadimage; then " \
+				   "run mmcboot; " \
+			   "else run netboot; " \
+			   "fi; " \
+		   "fi; " \
+	   "else run netboot; fi"
+
+#endif				/* __CONFIG_H */

include/fsl_esdhc.h

@@ -155,6 +155,8 @@
 #define ESDHC_HOSTCAPBLT_DMAS	0x00400000
 #define ESDHC_HOSTCAPBLT_HSS	0x00200000
 
+#define ESDHC_VENDORSPEC_VSELECT 0x00000002 /* Use 1.8V */
+
 struct fsl_esdhc_cfg {
 	u32	esdhc_base;
 	u32	sdhc_clk;

include/fsl_sec.h

@@ -135,7 +135,7 @@ typedef struct ccsr_sec {
 #define CONFIG_JRSTARTR_JR0		0x00000001
 
 struct jr_regs {
-#ifdef CONFIG_SYS_FSL_SEC_LE
+#if defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6)
 	u32 irba_l;
 	u32 irba_h;
 #else
@@ -148,7 +148,7 @@ struct jr_regs {
 	u32 irsa;
 	u32 rsvd3;
 	u32 irja;
-#ifdef CONFIG_SYS_FSL_SEC_LE
+#if defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6)
 	u32 orba_l;
 	u32 orba_h;
 #else
@@ -180,7 +180,7 @@ struct jr_regs {
  * related information
  */
 struct sg_entry {
-#ifdef CONFIG_SYS_FSL_SEC_LE
+#ifdef defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6)
 	uint32_t addr_lo;	/* Memory Address - lo */
 	uint16_t addr_hi;	/* Memory Address of start of buffer - hi */
 	uint16_t reserved_zero;
@@ -201,7 +201,79 @@ struct sg_entry {
 #define SG_ENTRY_OFFSET_SHIFT	0
 };
 
+#ifdef CONFIG_MX6
+/* CAAM Job Ring 0 Registers */
+/* Secure Memory Partition Owner register */
+#define SMCSJR_PO		(3 << 6)
+/* JR Allocation Error */
+#define SMCSJR_AERR		(3 << 12)
+/* Secure memory partition 0 page 0 owner register */
+#define CAAM_SMPO_0		CONFIG_SYS_FSL_SEC_ADDR + 0x1FBC
+/* Secure memory command register */
+#define CAAM_SMCJR0		CONFIG_SYS_FSL_SEC_ADDR + 0x10f4
+/* Secure memory command status register */
+#define CAAM_SMCSJR0		CONFIG_SYS_FSL_SEC_ADDR + 0x10fc
+/* Secure memory access permissions register */
+#define CAAM_SMAPJR0(y)	(CONFIG_SYS_FSL_SEC_ADDR + 0x1104 + y*16)
+/* Secure memory access group 2 register */
+#define CAAM_SMAG2JR0(y)	(CONFIG_SYS_FSL_SEC_ADDR + 0x1108 + y*16)
+/* Secure memory access group 1 register */
+#define CAAM_SMAG1JR0(y)	(CONFIG_SYS_FSL_SEC_ADDR + 0x110C + y*16)
+
+/* Commands and macros for secure memory */
+#define CMD_PAGE_ALLOC		0x1
+#define CMD_PAGE_DEALLOC	0x2
+#define CMD_PART_DEALLOC	0x3
+#define CMD_INQUIRY		0x5
+#define CMD_COMPLETE		(3 << 14)
+#define PAGE_AVAILABLE		0
+#define PAGE_OWNED		(3 << 6)
+#define PAGE(x)			(x << 16)
+#define PARTITION(x)		(x << 8)
+#define PARTITION_OWNER(x)	(0x3 << (x*2))
+
+/* Address of secure 4kbyte pages */
+#define SEC_MEM_PAGE0		CAAM_ARB_BASE_ADDR
+#define SEC_MEM_PAGE1		(CAAM_ARB_BASE_ADDR + 0x1000)
+#define SEC_MEM_PAGE2		(CAAM_ARB_BASE_ADDR + 0x2000)
+#define SEC_MEM_PAGE3		(CAAM_ARB_BASE_ADDR + 0x3000)
+
+#define JR_MID			2               /* Matches ROM configuration */
+#define KS_G1			(1 << JR_MID)   /* CAAM only */
+#define PERM			0x0000B008      /* Clear on release, lock SMAP
+						 * lock SMAG group 1 Blob */
+
+#define BLOB_SIZE(x)       (x + 32 + 16) /* Blob buffer size */
+
+/* HAB WRAPPED KEY header */
+#define WRP_HDR_SIZE		0x08
+#define HDR_TAG			0x81
+#define HDR_PAR			0x41
+/* HAB WRAPPED KEY Data */
+#define HAB_MOD			0x66
+#define HAB_ALG			0x55
+#define HAB_FLG			0x00
+
+/* Partition and Page IDs */
+#define PARTITION_1	1
+#define PAGE_1			1
+
+#define ERROR_IN_PAGE_ALLOC	1
+#define ECONSTRJDESC   -1
+
+#endif
+
 int sec_init(void);
+
+/* blob_dek:
+ * Encapsulates the src in a secure blob and stores it dst
+ * @src: reference to the plaintext
+ * @dst: reference to the output adrress
+ * @len: size in bytes of src
+ * @return: 0 on success, error otherwise
+ */
+int blob_dek(const u8 *src, u8 *dst, u8 len);
+
 #endif
 
 #endif /* __FSL_SEC_H */

include/mc34704.h

@@ -40,6 +40,7 @@ enum {
 /* GENERAL2 register fields */
 #define ONOFFE		(1 << 0)
 #define ONOFFD		(1 << 1)
+#define ONOFFA		(1 << 3)
 #define ALLOFF		(1 << 4)
 
 #endif /* __MC34704_H__ */

include/mmc.h

@@ -106,6 +106,7 @@
 #define SD_CMD_SEND_RELATIVE_ADDR	3
 #define SD_CMD_SWITCH_FUNC		6
 #define SD_CMD_SEND_IF_COND		8
+#define SD_CMD_SWITCH_UHS18V		11
 
 #define SD_CMD_APP_SET_BUS_WIDTH	6
 #define SD_CMD_ERASE_WR_BLK_START	32

include/power/pfuze100_pmic.h

@@ -232,5 +232,7 @@ enum {
 #define APS_PFM		0xc
 #define PWM_PFM		0xd
 
+#define SWITCH_SIZE	0x7
+
 int power_pfuze100_init(unsigned char bus);
 #endif