* Patches by Pantelis Antoniou, 30 Mar 2004:

- add auto-complete support to the U-Boot CLI - add support for NETTA and NETPHONE boards; fix NETVIA board * Patch by Yuli Barcohen, 28 Mar 2004: - Add support for MPC8272 family including MPC8247/8248/8271/8272 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS) - Change configuration method for MPC8260ADS family
2026-06-13 15:03:58 +03:00 · 2004-04-15 18:22:41 +00:00
parent d716b12671
commit 04a85b3b36
40 changed files with 7559 additions and 221 deletions
--- a/include/asm-ppc/cpm_8260.h
+++ b/include/asm-ppc/cpm_8260.h
@@ -83,9 +83,14 @@
 * downloading RAM microcode.
 */
 #define CPM_DATAONLY_BASE	((uint)128)
-#define CPM_DATAONLY_SIZE	((uint)(16 * 1024) - CPM_DATAONLY_BASE)
 #define CPM_DP_NOSPACE		((uint)0x7fffffff)
+#ifndef CONFIG_MPC8272_FAMILY
+#define CPM_DATAONLY_SIZE	((uint)(8 * 1024) - CPM_DATAONLY_BASE)
 #define CPM_FCC_SPECIAL_BASE	((uint)0x0000b000)
+#else  /* 8247/48/71/72 */
+#define CPM_DATAONLY_SIZE	((uint)(4 * 1024) - CPM_DATAONLY_BASE)
+#define CPM_FCC_SPECIAL_BASE	((uint)0x00009000)
+#endif /* !CONFIG_MPC8272_FAMILY */

 /* The number of pages of host memory we allocate for CPM.  This is
 * done early in kernel initialization to get physically contiguous
--- a/include/command.h
+++ b/include/command.h
@@ -46,6 +46,10 @@ struct cmd_tbl_s {
 #ifdef	CFG_LONGHELP
 	char		*help;		/* Help  message	(long)	*/
 #endif
+#ifdef CONFIG_AUTO_COMPLETE
+	/* do auto completion on the arguments */
+	int		(*complete)(int argc, char *argv[], char last_char, int maxv, char *cmdv[]);
+#endif
 };

 typedef struct cmd_tbl_s	cmd_tbl_t;
@@ -57,6 +61,11 @@ extern cmd_tbl_t  __u_boot_cmd_end;
 /* common/command.c */
 cmd_tbl_t *find_cmd(const char *cmd);

+#ifdef CONFIG_AUTO_COMPLETE
+extern void install_auto_complete(void);
+extern int cmd_auto_complete(const char *const prompt, char *buf, int *np, int *colp);
+#endif
+
 /*
 * Monitor Command
 *
--- a/include/common.h
+++ b/include/common.h
@@ -64,6 +64,15 @@ typedef volatile unsigned char	vu_char;
 #elif defined(CONFIG_5xx)
 #include <asm/5xx_immap.h>
 #elif defined(CONFIG_8260)
+#if   defined(CONFIG_MPC8247) \
+   || defined(CONFIG_MPC8248) \
+   || defined(CONFIG_MPC8271) \
+   || defined(CONFIG_MPC8272)
+#define CONFIG_MPC8272_FAMILY	1
+#endif
+#if defined(CONFIG_MPC8272_FAMILY)
+#define CONFIG_MPC8260	1
+#endif
 #include <asm/immap_8260.h>
 #endif
 #ifdef CONFIG_MPC85xx
@@ -196,6 +205,10 @@ void	setenv	     (char *, char *);
 # include <asm/u-boot-i386.h>
 #endif /* CONFIG_I386 */

+#ifdef CONFIG_AUTO_COMPLETE
+int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
+#endif
+
 void	pci_init      (void);
 void	pci_init_board(void);
 void	pciinfo	      (int, int);
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -232,7 +232,7 @@
 * Ethernet configuration
 */
 #define CONFIG_MPC5xxx_FEC	1
-/* 
+/*
 * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
 */
 /* #define CONFIG_FEC_10MBIT 1 */
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -7,10 +7,11 @@
 * Note: my board is a PILOT rev.
 * Note: the mpc8260ads doesn't come with a proper Ethernet MAC address.
 *
- * (C) Copyright 2003 Arabella Software Ltd.
+ * (C) Copyright 2003-2004 Arabella Software Ltd.
 * Yuli Barcohen <yuli@arabellasw.com>
 * Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2.
 * Ported to PQ2FADS-ZU and PQ2FADS-VR boards.
+ * Ported to MPC8272ADS board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
@@ -39,18 +40,24 @@
 * (easy to change)
 */

-#define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
-#define CONFIG_MPC8260ADS	1	/* ...on motorola ads board */
+#define CONFIG_MPC8260ADS	1	/* Motorola PQ2 ADS family board */

 /* ADS flavours */
 #define CFG_8260ADS		1	/* MPC8260ADS */
 #define CFG_8266ADS		2	/* MPC8266ADS */
 #define CFG_PQ2FADS		3	/* PQ2FADS-ZU or PQ2FADS-VR */
+#define CFG_8272ADS		4	/* MPC8272ADS */

 #ifndef CONFIG_ADSTYPE
 #define CONFIG_ADSTYPE		CFG_8260ADS
 #endif /* CONFIG_ADSTYPE */

+#if CONFIG_ADSTYPE == CFG_8272ADS
+#define CONFIG_MPC8272		1
+#else
+#define CONFIG_MPC8260		1
+#endif /* CONFIG_ADSTYPE == CFG_8272ADS */
+
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/

 /* allow serial and ethaddr to be overwritten */
@@ -92,42 +99,60 @@

 #define CONFIG_ETHER_INDEX	2	/* which SCC/FCC channel for ethernet */

-#if (CONFIG_ETHER_INDEX == 2)
-/*
- * - Rx-CLK is CLK13
- * - Tx-CLK is CLK14
- * - Select bus for bd/buffers (see 28-13)
- * - Full duplex
- */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+#if   CONFIG_ETHER_INDEX == 1
+
+# define CFG_PHY_ADDR		0
+# define CFG_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10)
+# define CFG_CMXFCR_MASK	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
+
+#elif CONFIG_ETHER_INDEX == 2
+
+#if CONFIG_ADSTYPE == CFG_8272ADS	/* RxCLK is CLK15, TxCLK is CLK16 */
+# define CFG_PHY_ADDR		3
+# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK16)
+#else					/* RxCLK is CLK13, TxCLK is CLK14 */
+# define CFG_PHY_ADDR		0
 # define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+#endif /* CONFIG_ADSTYPE == CFG_8272ADS */
+
+# define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)

 #endif	/* CONFIG_ETHER_INDEX */

+#define CFG_CPMFCR_RAMTYPE	0		/* BDs and buffers on 60x bus */
+#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)  /* Full duplex */
+
 #define CONFIG_MII			/* MII PHY management		*/
 #define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
 /*
 * GPIO pins used for bit-banged MII communications
 */
 #define MDIO_PORT	2		/* Port C */
-#define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
-#define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
-#define MDIO_READ	((iop->pdat &  0x00400000) != 0)

-#define MDIO(bit)	if(bit) iop->pdat |=  0x00400000; \
-			else	iop->pdat &= ~0x00400000
+#if CONFIG_ADSTYPE == CFG_8272ADS
+#define CFG_MDIO_PIN	0x00002000	/* PC18 */
+#define CFG_MDC_PIN	0x00001000	/* PC19 */
+#else
+#define CFG_MDIO_PIN	0x00400000	/* PC9  */
+#define CFG_MDC_PIN	0x00200000	/* PC10 */
+#endif /* CONFIG_ADSTYPE == CFG_8272ADS */

-#define MDC(bit)	if(bit) iop->pdat |=  0x00200000; \
-			else	iop->pdat &= ~0x00200000
+#define MDIO_ACTIVE	(iop->pdir |=  CFG_MDIO_PIN)
+#define MDIO_TRISTATE	(iop->pdir &= ~CFG_MDIO_PIN)
+#define MDIO_READ	((iop->pdat &  CFG_MDIO_PIN) != 0)
+
+#define MDIO(bit)	if(bit) iop->pdat |=  CFG_MDIO_PIN; \
+			else	iop->pdat &= ~CFG_MDIO_PIN
+
+#define MDC(bit)	if(bit) iop->pdat |=  CFG_MDC_PIN; \
+			else	iop->pdat &= ~CFG_MDC_PIN

 #define MIIDELAY	udelay(1)

 #endif /* CONFIG_ETHER_ON_FCC */

-#if CONFIG_ADSTYPE == CFG_PQ2FADS
-#undef CONFIG_SPD_EEPROM	/* On PQ2FADS-ZU, SDRAM is soldered  */
+#if CONFIG_ADSTYPE >= CFG_PQ2FADS
+#undef CONFIG_SPD_EEPROM	/* On new boards, SDRAM is soldered */
 #else
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
 #define CFG_I2C_SPEED		100000	/* I2C speed and slave address	*/
@@ -136,21 +161,21 @@
 #if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
 #define CONFIG_SPD_ADDR         0x50
 #endif
-#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+#endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */

 #ifndef CONFIG_SDRAM_PBI
 #define CONFIG_SDRAM_PBI        0 /* By default, use bank-based interleaving */
 #endif

 #ifndef CONFIG_8260_CLKIN
-#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#if CONFIG_ADSTYPE >= CFG_PQ2FADS
 #define CONFIG_8260_CLKIN	100000000	/* in Hz */
 #else
 #define CONFIG_8260_CLKIN	66000000	/* in Hz */
 #endif
 #endif

-#define CONFIG_BAUDRATE		115200
+#define CONFIG_BAUDRATE		38400

 #define CFG_EXCLUDE		 CFG_CMD_BEDBUG | \
 				 CFG_CMD_BMP	| \
@@ -176,7 +201,7 @@
 				 CFG_CMD_USB	| \
 				 CFG_CMD_VFD

-#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#if CONFIG_ADSTYPE >= CFG_PQ2FADS
 #define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
 				 CFG_CMD_SDRAM	| \
 				 CFG_CMD_I2C	| \
@@ -184,14 +209,14 @@
 #else
 #define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
 				 CFG_EXCLUDE	) )
-#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+#endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */

 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>

-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND	"bootm 100000"	/* autoboot command */
-#define CONFIG_BOOTARGS		"root=/dev/ram rw"
+#define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds */
+#define CONFIG_BOOTCOMMAND	"bootm fff80000"	/* autoboot command */
+#define CONFIG_BOOTARGS		"root=/dev/mtdblock2"

 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
@@ -256,12 +281,12 @@
 #define RS232EN_2		0x01000001
 #define FETHIEN1		0x08000008
 #define FETH1_RST		0x04000004
-#define FETHIEN2		0x01000000
+#define FETHIEN2		0x10000000
 #define FETH2_RST		0x08000000
 #define BCSR_PCI_MODE		0x01000000

 #define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CFG_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
 #define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
@@ -273,7 +298,6 @@
 			    ( HRCW_BMS | HRCW_APPC10 )			    |\
 			    ( HRCW_MODCK_H0101 )			     \
 			)
-
 /* no slaves */
 #define CFG_HRCW_SLAVE1 0
 #define CFG_HRCW_SLAVE2 0
@@ -336,8 +360,8 @@
 #define CFG_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
 #define CFG_RCCR		0

-#if CONFIG_ADSTYPE == CFG_8266ADS
-#undef CFG_LSDRAM_BASE		/* No local bus SDRAM on MPC8266ADS */
+#if (CONFIG_ADSTYPE == CFG_8266ADS) || (CONFIG_ADSTYPE == CFG_8272ADS)
+#undef CFG_LSDRAM_BASE		/* No local bus SDRAM on these boards */
 #endif /* CONFIG_ADSTYPE == CFG_8266ADS */

 #if CONFIG_ADSTYPE == CFG_PQ2FADS
@@ -347,6 +371,11 @@
 #define CFG_LSDMR		0x828737A3
 #define CFG_LSRT		0x13
 #define CFG_MPTPR		0x2800
+#elif CONFIG_ADSTYPE == CFG_8272ADS
+#define CFG_OR2			0xFC002CC0
+#define CFG_PSDMR		0x834E24A3
+#define CFG_PSRT		0x13
+#define CFG_MPTPR		0x2800
 #else
 #define CFG_OR2			0xFF000CA0
 #define CFG_PSDMR		0x016EB452
--- a/include/configs/NETPHONE.h
+++ b/include/configs/NETPHONE.h
@@ -0,0 +1,694 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
+ * U-Boot port on NetTA4 board
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC870		1	/* This is a MPC885 CPU		*/
+#define CONFIG_NETPHONE		1	/* ...on a NetPhone board	*/
+
+#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+#undef	CONFIG_8xx_CONS_SMC2
+#undef	CONFIG_8xx_CONS_NONE
+
+#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
+
+/* #define CONFIG_XIN		 10000000 */
+#define CONFIG_XIN		 50000000
+#define MPC8XX_HZ		120000000
+
+#define CONFIG_8xx_GCLK_FREQ	MPC8XX_HZ
+
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
+
+#undef	CONFIG_CLOCKS_IN_MHZ	/* clocks NOT passsed to Linux in MHz */
+
+#define CONFIG_PREBOOT	"echo;"
+
+#undef	CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND							\
+	"tftpboot; " 								\
+	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " 	\
+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " 	\
+	"bootm"
+
+#define CONFIG_AUTOSCRIPT
+#define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
+#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
+
+#define	CONFIG_STATUS_LED	1	/* Status LED enabled		*/
+#define CONFIG_BOARD_SPECIFIC_LED	/* version has board specific leds */
+
+#define CONFIG_BOOTP_MASK		(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN)
+
+#undef CONFIG_MAC_PARTITION
+#undef CONFIG_DOS_PARTITION
+
+#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
+
+#define	CONFIG_NET_MULTI	1 	/* the only way to get the FEC in */
+#define	FEC_ENET		1	/* eth.c needs it that way... */
+#undef CFG_DISCOVER_PHY
+#define CONFIG_MII		1
+#define CONFIG_RMII		1	/* use RMII interface */
+
+#define CONFIG_ETHER_ON_FEC1	1
+#define CONFIG_FEC1_PHY		8 	/* phy address of FEC */
+#define CONFIG_FEC1_PHY_NORXERR 1
+
+#define CONFIG_ETHER_ON_FEC2	1
+#define CONFIG_FEC2_PHY		4
+#define CONFIG_FEC2_PHY_NORXERR 1
+
+#define CONFIG_ENV_OVERWRITE	1	/* allow modification of vendor params */
+
+#define CONFIG_COMMANDS       ( CONFIG_CMD_DFL	| \
+				CFG_CMD_NAND	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_PING  	| \
+				CFG_CMD_MII 	| \
+				CFG_CMD_CDP	  \
+				)
+
+#define CONFIG_BOARD_EARLY_INIT_F	1
+#define CONFIG_MISC_INIT_R
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP			/* undef to save memory		*/
+#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+
+#define CFG_HUSH_PARSER	1
+#define CFG_PROMPT_HUSH_PS2	"> "
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0300000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
+
+#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+
+#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFF000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define	CFG_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
+#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define	CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x40000000
+#if defined(DEBUG)
+#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#else
+#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#endif
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SECT_SIZE	0x10000
+
+#define	CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x60000)
+#define CFG_ENV_OFFSET		0
+#define	CFG_ENV_SIZE		0x4000
+
+#define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + 0x70000)
+#define CFG_ENV_OFFSET_REDUND	0
+#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#ifndef	CONFIG_CAN_DRIVER
+#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
+#else	/* we must activate GPL5 in the SIUMCR for CAN */
+#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
+#endif	/* CONFIG_CAN_DRIVER */
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register		11-27
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit
+ *
+ */
+
+#if CONFIG_XIN == 10000000
+
+#if MPC8XX_HZ == 120000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 100000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 50000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 25000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 40000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 75000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#else
+#error unsupported CPU freq for XIN = 10MHz
+#endif
+
+#elif CONFIG_XIN == 50000000
+
+#if MPC8XX_HZ == 120000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 100000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#else
+#error unsupported CPU freq for XIN = 50MHz
+#endif
+
+#else
+
+#error unsupported XIN freq
+#endif
+
+
+/*
+ *-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+
+#define SCCR_MASK	SCCR_EBDF11
+#if MPC8XX_HZ > 66666666
+#define CFG_SCCR	(SCCR_TBS     | \
+			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00 | SCCR_EBDF01)
+#else
+#define CFG_SCCR	(SCCR_TBS     | \
+			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00)
+#endif
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+/*#define	CFG_DER	0x2002000F*/
+#define CFG_DER	0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+
+/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
+#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
+
+#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+
+/*
+ * BR3 and OR3 (SDRAM)
+ *
+ */
+#define SDRAM_BASE3_PRELIM	0x00000000	/* SDRAM bank #0	*/
+#define	SDRAM_MAX_SIZE		(256 << 20)	/* max 256MB per bank	*/
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
+#define CFG_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
+
+#define CFG_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CFG_OR_TIMING_SDRAM)
+#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
+
+/*
+ * Memory Periodic Timer Prescaler
+ */
+
+/*
+ * Memory Periodic Timer Prescaler
+ *
+ * The Divider for PTA (refresh timer) configuration is based on an
+ * example SDRAM configuration (64 MBit, one bank). The adjustment to
+ * the number of chip selects (NCS) and the actually needed refresh
+ * rate is done by setting MPTPR.
+ *
+ * PTA is calculated from
+ *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
+ *
+ *	gclk	  CPU clock (not bus clock!)
+ *	Trefresh  Refresh cycle * 4 (four word bursts used)
+ *
+ * 4096  Rows from SDRAM example configuration
+ * 1000  factor s -> ms
+ *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
+ *    4  Number of refresh cycles per period
+ *   64  Refresh cycle in ms per number of rows
+ * --------------------------------------------
+ * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
+ *
+ * 50 MHz => 50.000.000 / Divider =  98
+ * 66 Mhz => 66.000.000 / Divider = 129
+ * 80 Mhz => 80.000.000 / Divider = 156
+ */
+
+#define CFG_MAMR_PTA		 234
+
+/*
+ * For 16 MBit, refresh rates could be 31.3 us
+ * (= 64 ms / 2K = 125 / quad bursts).
+ * For a simpler initialization, 15.6 us is used instead.
+ *
+ * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ */
+#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
+#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#define CONFIG_ARTOS			/* include ARTOS support */
+
+#define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
+
+/****************************************************************/
+
+#define DSP_SIZE	0x00010000	/* 64K */
+#define NAND_SIZE	0x00010000	/* 64K */
+#define ER_SIZE		0x00010000	/* 64K */
+
+#define DSP_BASE	0xF1000000
+#define NAND_BASE	0xF1010000
+#define ER_BASE		0xF1020000
+
+/****************************************************************/
+
+/* NAND */
+#define CFG_NAND_BASE		NAND_BASE
+#define CONFIG_MTD_NAND_ECC_JFFS2
+
+#define CFG_MAX_NAND_DEVICE	1
+
+#define SECTORSIZE		512
+#define ADDR_COLUMN		1
+#define ADDR_PAGE		2
+#define ADDR_COLUMN_PAGE	3
+#define NAND_ChipID_UNKNOWN 	0x00
+#define NAND_MAX_FLOORS		1
+#define NAND_MAX_CHIPS		1
+
+/* ALE = PD17, CLE = PE18, CE = PE20, F_RY_BY = PE31 */
+#define NAND_DISABLE_CE(nand) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 20)); \
+	} while(0)
+
+#define NAND_ENABLE_CE(nand) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 20)); \
+	} while(0)
+
+#define NAND_CTL_CLRALE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 17)); \
+	} while(0)
+
+#define NAND_CTL_SETALE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 17)); \
+	} while(0)
+
+#define NAND_CTL_CLRCLE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 18)); \
+	} while(0)
+
+#define NAND_CTL_SETCLE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 18)); \
+	} while(0)
+
+#define NAND_WAIT_READY(nand) \
+	do { \
+		while ((((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat & (1 << (31 - 31))) == 0) \
+			; \
+	} while (0)
+
+#define WRITE_NAND_COMMAND(d, adr) \
+	do { \
+		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+	} while(0)
+
+#define WRITE_NAND_ADDRESS(d, adr) \
+	do { \
+		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+	} while(0)
+
+#define WRITE_NAND(d, adr) \
+	do { \
+		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+	} while(0)
+
+#define READ_NAND(adr) \
+	((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
+
+/*****************************************************************************/
+
+#define STATUS_LED_BIT		0x00000008		/* bit 28 */
+#define STATUS_LED_PERIOD	(CFG_HZ / 2)
+#define STATUS_LED_STATE	STATUS_LED_BLINKING
+
+#define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
+#define STATUS_LED_BOOT		0		/* LED 0 used for boot status */
+
+#ifndef __ASSEMBLY__
+
+/* LEDs */
+
+/* led_id_t is unsigned int mask */
+typedef unsigned int led_id_t;
+
+#define __led_toggle(_msk) \
+	do { \
+		((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat ^= (_msk); \
+	} while(0)
+
+#define __led_set(_msk, _st) \
+	do { \
+		if ((_st)) \
+			((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat |= (_msk); \
+		else \
+			((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat &= ~(_msk); \
+	} while(0)
+
+#define __led_init(msk, st) __led_set(msk, st)
+
+#endif
+
+/***********************************************************************************************************
+
+   Pin definitions:
+
+ +------+----------------+--------+------------------------------------------------------------
+ |  #   | Name           | Type   | Comment
+ +------+----------------+--------+------------------------------------------------------------
+ | PA3  | SPIEN_MAX      | Output | MAX serial to uart chip select
+ | PA7  | DSP_INT        | Output | DSP interrupt
+ | PA10 | DSP_RESET      | Output | DSP reset
+ | PA14 | USBOE          | Output | USB (1)
+ | PA15 | USBRXD         | Output | USB (1)
+ | PB19 | BT_RTS         | Output | Bluetooth (0)
+ | PB23 | BT_CTS         | Output | Bluetooth (0)
+ | PB26 | SPIEN_SEP      | Output | Serial EEPROM chip select
+ | PB27 | SPICS_DISP     | Output | Display chip select
+ | PB28 | SPI_RXD_3V     | Input  | SPI Data Rx
+ | PB29 | SPI_TXD        | Output | SPI Data Tx
+ | PB30 | SPI_CLK        | Output | SPI Clock
+ | PC10 | DISPA0         | Output | Display A0
+ | PC11 | BACKLIGHT      | Output | Display backlit
+ | PC12 | SPI2RXD        | Input  | 2nd SPI RXD
+ | PC13 | SPI2TXD        | Output | 2nd SPI TXD
+ | PC15 | SPI2CLK        | Output | 2nd SPI CLK
+ | PE17 | F_ALE          | Output | NAND F_ALE
+ | PE18 | F_CLE          | Output | NAND F_CLE
+ | PE20 | F_CE           | Output | NAND F_CE
+ | PE24 | SPICS_SCOUT    | Output | Codec chip select
+ | PE27 | SPICS_ER       | Output | External serial register CS
+ | PE28 | LEDIO1         | Output | LED
+ | PE29 | LEDIO2         | Output | LED hook for A (TA2)
+ | PE30 | LEDIO3         | Output | LED hook for A (TA2)
+ | PE31 | F_RY_BY        | Input  | NAND F_RY_BY
+ +------+----------------+--------+---------------------------------------------------
+
+ Chip selects:
+
+ +------+----------------+------------------------------------------------------------
+ |  #   | Name           | Comment
+ +------+----------------+------------------------------------------------------------
+ | CS0  | CS0            | Boot flash
+ | CS1  | CS_FLASH       | NAND flash
+ | CS2  | CS_DSP         | DSP
+ | CS3  | DCS_DRAM       | DRAM
+ +------+----------------+------------------------------------------------------------
+
+ Interrupts:
+
+ +------+----------------+------------------------------------------------------------
+ |  #   | Name           | Comment
+ +------+----------------+------------------------------------------------------------
+ | IRQ1 | IRQ_DSP        | DSP interrupt
+ | IRQ3 | S_INTER        | DUSLIC ???
+ | IRQ4 | F_RY_BY        | NAND
+ | IRQ7 | IRQ_MAX        | MAX 3100 interrupt
+ +------+----------------+------------------------------------------------------------
+
+ Interrupts on PCMCIA pins:
+
+ +------+----------------+------------------------------------------------------------
+ |  #   | Name           | Comment
+ +------+----------------+------------------------------------------------------------
+ | IP_A0| PHY1_LINK      | Link status changed for #1 Ethernet interface
+ | IP_A1| PHY2_LINK      | Link status changed for #2 Ethernet interface
+ | IP_A2| RMII1_MDINT    | PHY interrupt for #1
+ | IP_A3| RMII2_MDINT    | PHY interrupt for #2
+ +------+----------------+------------------------------------------------------------
+
+*************************************************************************************************/
+
+#define CONFIG_SED156X			1	/* use SED156X */
+#define CONFIG_SED156X_PG12864Q		1	/* type of display used */
+
+/* serial interfacing macros */
+
+#define SED156X_SPI_RXD_PORT	(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define SED156X_SPI_RXD_MASK	0x00000008
+
+#define SED156X_SPI_TXD_PORT	(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define SED156X_SPI_TXD_MASK	0x00000004
+
+#define SED156X_SPI_CLK_PORT	(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define SED156X_SPI_CLK_MASK	0x00000002
+
+#define SED156X_CS_PORT		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define SED156X_CS_MASK		0x00000010
+
+#define SED156X_A0_PORT		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat)
+#define SED156X_A0_MASK		0x0020
+
+/*************************************************************************************************/
+
+#define CFG_CONSOLE_IS_IN_ENV		1
+#define CFG_CONSOLE_OVERWRITE_ROUTINE	1
+#define CFG_CONSOLE_ENV_OVERWRITE	1
+
+/*************************************************************************************************/
+
+/* use board specific hardware */
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_SHOW_ACTIVITY
+
+/*************************************************************************************************/
+
+/* phone console configuration */
+
+#define PHONE_CONSOLE_POLL_HZ		(CFG_HZ/200)	/* poll every 5ms */
+
+/*************************************************************************************************/
+
+#define CONFIG_CDP_DEVICE_ID		20
+#define CONFIG_CDP_DEVICE_ID_PREFIX	"NP"	/* netphone */
+#define CONFIG_CDP_PORT_ID		"eth%d"
+#define CONFIG_CDP_CAPABILITIES		0x00000010
+#define CONFIG_CDP_VERSION		"u-boot" " " __DATE__ " " __TIME__
+#define CONFIG_CDP_PLATFORM		"Intracom NetPhone"
+#define CONFIG_CDP_TRIGGER		0x20020001
+#define CONFIG_CDP_POWER_CONSUMPTION	4300	/* 90 mA @ 48V */
+#define CONFIG_CDP_APPLIANCE_VLAN_TYPE	0x01	/* ipphone */
+
+/*************************************************************************************************/
+
+#define CONFIG_AUTO_COMPLETE	1
+
+/*************************************************************************************************/
+
+#endif	/* __CONFIG_H */
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -0,0 +1,745 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
+ * U-Boot port on NetTA4 board
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC885		1	/* This is a MPC885 CPU		*/
+#define CONFIG_NETTA		1	/* ...on a NetTA board		*/
+
+#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+#undef	CONFIG_8xx_CONS_SMC2
+#undef	CONFIG_8xx_CONS_NONE
+
+#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
+
+/* #define CONFIG_XIN		 10000000 */
+#define CONFIG_XIN		 50000000
+#define MPC8XX_HZ		120000000
+/* #define MPC8XX_HZ		100000000 */
+/* #define MPC8XX_HZ		 50000000 */
+/* #define MPC8XX_HZ		 80000000 */
+
+#define CONFIG_8xx_GCLK_FREQ	MPC8XX_HZ
+
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
+
+#undef	CONFIG_CLOCKS_IN_MHZ	/* clocks NOT passsed to Linux in MHz */
+
+#define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
+
+#undef	CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND							\
+	"tftpboot; " 								\
+	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " 	\
+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " 	\
+	"bootm"
+
+#define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
+#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+#define CONFIG_HW_WATCHDOG
+
+#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
+
+#define CONFIG_BOOTP_MASK		(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN)
+
+#undef CONFIG_MAC_PARTITION
+#undef CONFIG_DOS_PARTITION
+
+#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
+
+#define	CONFIG_NET_MULTI	1 	/* the only way to get the FEC in */
+#define	FEC_ENET		1	/* eth.c needs it that way... */
+#undef  CFG_DISCOVER_PHY		/* do not discover phys */
+#define CONFIG_MII		1
+#define CONFIG_RMII		1	/* use RMII interface */
+
+#if defined(CONFIG_NETTA_ISDN)
+#define CONFIG_ETHER_ON_FEC1	1
+#define CONFIG_FEC1_PHY		1   	/* phy address of FEC1 */
+#define CONFIG_FEC1_PHY_NORXERR 1
+#undef  CONFIG_ETHER_ON_FEC2
+#else
+#define CONFIG_ETHER_ON_FEC1	1
+#define CONFIG_FEC1_PHY		8  	/* phy address of FEC1 */
+#define CONFIG_FEC1_PHY_NORXERR 1
+#define CONFIG_ETHER_ON_FEC2	1
+#define CONFIG_FEC2_PHY		1   	/* phy address of FEC2 */
+#define CONFIG_FEC2_PHY_NORXERR 1
+#endif
+
+#define CONFIG_ENV_OVERWRITE	1	/* allow modification of vendor params */
+
+/* POST support */
+#define CONFIG_POST		(CFG_POST_MEMORY   | \
+				 CFG_POST_DSP	   )
+
+#define CONFIG_COMMANDS       ( CONFIG_CMD_DFL	| \
+				CFG_CMD_NAND	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_PING  	| \
+				CFG_CMD_MII 	| \
+				CFG_CMD_PCMCIA	| CFG_CMD_IDE | CFG_CMD_FAT | \
+				CFG_CMD_DIAG    | \
+				CFG_CMD_CDP	  \
+				)
+
+#define CONFIG_BOARD_EARLY_INIT_F	1
+#define CONFIG_MISC_INIT_R
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP			/* undef to save memory		*/
+#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+
+#define CFG_HUSH_PARSER	1
+#define CFG_PROMPT_HUSH_PS2	"> "
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0300000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
+
+#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+
+#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFF000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define	CFG_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
+#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define	CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x40000000
+#if defined(DEBUG)
+#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#else
+#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#endif
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SECT_SIZE	0x10000
+
+#define	CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x60000)
+#define CFG_ENV_OFFSET		0
+#define	CFG_ENV_SIZE		0x4000
+
+#define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + 0x70000)
+#define CFG_ENV_OFFSET_REDUND	0
+#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#ifndef	CONFIG_CAN_DRIVER
+#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
+#else	/* we must activate GPL5 in the SIUMCR for CAN */
+#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
+#endif	/* CONFIG_CAN_DRIVER */
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register		11-27
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit
+ *
+ */
+
+#if CONFIG_XIN == 10000000
+
+#if MPC8XX_HZ == 120000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 100000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 50000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 25000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 40000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 75000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#else
+#error unsupported CPU freq for XIN = 10MHz
+#endif
+
+#elif CONFIG_XIN == 50000000
+
+#if MPC8XX_HZ == 120000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 100000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ ==  80000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (0 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ ==  50000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (1 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#else
+#error unsupported CPU freq for XIN = 50MHz
+#endif
+
+#else
+
+#error unsupported XIN freq
+#endif
+
+
+/*
+ *-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+
+#define SCCR_MASK	SCCR_EBDF11
+#if MPC8XX_HZ > 66666666
+#define CFG_SCCR	(SCCR_TBS     | \
+			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL001 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00 | SCCR_EBDF01)
+#else
+#define CFG_SCCR	(SCCR_TBS     | \
+			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00)
+#endif
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+/*#define	CFG_DER	0x2002000F*/
+#define CFG_DER	0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+
+/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
+#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
+
+#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+
+/*
+ * BR3 and OR3 (SDRAM)
+ *
+ */
+#define SDRAM_BASE3_PRELIM	0x00000000	/* SDRAM bank #0	*/
+#define	SDRAM_MAX_SIZE		(256 << 20)	/* max 256MB per bank	*/
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
+#define CFG_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
+
+#define CFG_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CFG_OR_TIMING_SDRAM)
+#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
+
+/*
+ * Memory Periodic Timer Prescaler
+ */
+
+/*
+ * Memory Periodic Timer Prescaler
+ *
+ * The Divider for PTA (refresh timer) configuration is based on an
+ * example SDRAM configuration (64 MBit, one bank). The adjustment to
+ * the number of chip selects (NCS) and the actually needed refresh
+ * rate is done by setting MPTPR.
+ *
+ * PTA is calculated from
+ *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
+ *
+ *	gclk	  CPU clock (not bus clock!)
+ *	Trefresh  Refresh cycle * 4 (four word bursts used)
+ *
+ * 4096  Rows from SDRAM example configuration
+ * 1000  factor s -> ms
+ *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
+ *    4  Number of refresh cycles per period
+ *   64  Refresh cycle in ms per number of rows
+ * --------------------------------------------
+ * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
+ *
+ * 50 MHz => 50.000.000 / Divider =  98
+ * 66 Mhz => 66.000.000 / Divider = 129
+ * 80 Mhz => 80.000.000 / Divider = 156
+ */
+
+#if   MPC8XX_HZ == 120000000
+#define CFG_MAMR_PTA		 234
+#elif MPC8XX_HZ == 100000000
+#define CFG_MAMR_PTA		 195
+#elif MPC8XX_HZ ==  80000000
+#define CFG_MAMR_PTA		 156
+#elif MPC8XX_HZ ==  50000000
+#define CFG_MAMR_PTA		  98
+#else
+#error Unknown frequency
+#endif
+
+
+/*
+ * For 16 MBit, refresh rates could be 31.3 us
+ * (= 64 ms / 2K = 125 / quad bursts).
+ * For a simpler initialization, 15.6 us is used instead.
+ *
+ * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ */
+#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
+#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#define CONFIG_ARTOS			/* include ARTOS support */
+
+#define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
+
+/***********************************************************************************************************
+
+   Pin definitions:
+
+ +------+----------------+--------+------------------------------------------------------------
+ |  #   | Name           | Type   | Comment
+ +------+----------------+--------+------------------------------------------------------------
+ | PA3  | OK_ETH_3V      | Input  | CISCO Ethernet power OK
+ |      |                |        | (NetRoute: FEC1, TA: FEC2) (0=power OK)
+ | PA6  | P_VCCD1        | Output | TPS2211A PCMCIA
+ | PA7  | DCL1_3V        | Periph | IDL1 PCM clock
+ | PA8  | DSP_DR1        | Periph | IDL1 PCM Data Rx
+ | PA9  | L1TXDA         | Periph | IDL1 PCM Data Tx
+ | PA10 | P_VCCD0        | Output | TPS2211A PCMCIA
+ | PA12 | P_SHDN         | Output | TPS2211A PCMCIA
+ | PA13 | ETH_LOOP       | Output | CISCO Loopback remote power
+ |      |                |        | (NetRoute: FEC1, TA: FEC2) (1=NORMAL)
+ | PA14 | P_VPPD0        | Output | TPS2211A PCMCIA
+ | PA15 | P_VPPD1        | Output | TPS2211A PCMCIA
+ | PB14 | SPIEN_FXO      | Output | SPI CS for FXO daughter-board
+ | PB15 | SPIEN_S1       | Output | SPI CS for S-interface 1 (NetRoute only)
+ | PB16 | DREQ1          | Output | D channel request for S-interface chip 1.
+ | PB17 | L1ST3          | Periph | IDL1 timeslot enable signal for PPC
+ | PB18 | L1ST2          | Periph | IDL1 timeslot enable signal for PPC
+ | PB19 | SPIEN_S2       | Output | SPI CS for S-interface 2 (NetRoute only)
+ | PB20 | SPIEN_SEEPROM  | Output | SPI CS for serial eeprom
+ | PB21 | LEDIO          | Output | Led mode indication for PHY
+ | PB22 | UART_CTS       | Input  | UART CTS
+ | PB23 | UART_RTS       | Output | UART RTS
+ | PB24 | UART_RX        | Periph | UART Data Rx
+ | PB25 | UART_TX        | Periph | UART Data Tx
+ | PB26 | RMII-MDC       | Periph | Free for future use (MII mgt clock)
+ | PB27 | RMII-MDIO      | Periph | Free for future use (MII mgt data)
+ | PB28 | SPI_RXD_3V     | Input  | SPI Data Rx
+ | PB29 | SPI_TXD        | Output | SPI Data Tx
+ | PB30 | SPI_CLK        | Output | SPI Clock
+ | PB31 | RMII1-REFCLK   | Periph | RMII reference clock for FEC1
+ | PC4  | PHY1_LINK      | Input  | PHY link state FEC1 (interrupt)
+ | PC5  | PHY2_LINK      | Input  | PHY link state FEC2 (interrupt)
+ | PC6  | RMII1-MDINT    | Input  | PHY prog interrupt FEC1 (interrupt)
+ | PC7  | RMII2-MDINT    | Input  | PHY prog interrupt FEC1 (interrupt)
+ | PC8  | P_OC           | Input  | TPS2211A PCMCIA overcurrent (interrupt) (1=OK)
+ | PC9  | COM_HOOK1      | Input  | Codec interrupt chip #1 (interrupt)
+ | PC10 | COM_HOOK2      | Input  | Codec interrupt chip #2 (interrupt)
+ | PC11 | COM_HOOK4      | Input  | Codec interrupt chip #4 (interrupt)
+ | PC12 | COM_HOOK3      | Input  | Codec interrupt chip #3 (interrupt)
+ | PC13 | F_RY_BY        | Input  | NAND ready signal (interrupt)
+ | PC14 | FAN_OK         | Input  | Fan status signal (interrupt) (1=OK)
+ | PC15 | PC15_DIRECT0   | Periph | PCMCIA DMA request.
+ | PD3  | F_ALE          | Output | NAND
+ | PD4  | F_CLE          | Output | NAND
+ | PD5  | F_CE           | Output | NAND
+ | PD6  | DSP_INT        | Output | DSP debug interrupt
+ | PD7  | DSP_RESET      | Output | DSP reset
+ | PD8  | RMII_MDC       | Periph | MII mgt clock
+ | PD9  | SPIEN_C1       | Output | SPI CS for codec #1
+ | PD10 | SPIEN_C2       | Output | SPI CS for codec #2
+ | PD11 | SPIEN_C3       | Output | SPI CS for codec #3
+ | PD12 | FSC2           | Periph | IDL2 frame sync
+ | PD13 | DGRANT2        | Input  | D channel grant from S #2
+ | PD14 | SPIEN_C4       | Output | SPI CS for codec #4
+ | PD15 | TP700          | Output | Testpoint for software debugging
+ | PE14 | RMII2-TXD0     | Periph | FEC2 transmit data
+ | PE15 | RMII2-TXD1     | Periph | FEC2 transmit data
+ | PE16 | RMII2-REFCLK   | Periph | TA: RMII ref clock for
+ |      | DCL2           | Periph | NetRoute: PCM clock #2
+ | PE17 | TP703          | Output | Testpoint for software debugging
+ | PE18 | DGRANT1        | Input  |  D channel grant from S #1
+ | PE19 | RMII2-TXEN     | Periph | TA: FEC2 tx enable
+ |      | PCM2OUT        | Periph | NetRoute: Tx data for IDL2
+ | PE20 | FSC1           | Periph | IDL1 frame sync
+ | PE21 | RMII2-RXD0     | Periph | FEC2 receive data
+ | PE22 | RMII2-RXD1     | Periph | FEC2 receive data
+ | PE23 | L1ST1          | Periph | IDL1 timeslot enable signal for PPC
+ | PE24 | U-N1           | Output | Select user/network for S #1 (0=user)
+ | PE25 | U-N2           | Output | Select user/network for S #2 (0=user)
+ | PE26 | RMII2-RXDV     | Periph | FEC2 valid
+ | PE27 | DREQ2          | Output | D channel request for S #2.
+ | PE28 | FPGA_DONE      | Input  | FPGA done signal
+ | PE29 | FPGA_INIT      | Output | FPGA init signal
+ | PE30 | UDOUT2_3V      | Input  | IDL2 PCM input
+ | PE31 |                |        | Free
+ +------+----------------+--------+---------------------------------------------------
+
+ Chip selects:
+
+ +------+----------------+------------------------------------------------------------
+ |  #   | Name           | Comment
+ +------+----------------+------------------------------------------------------------
+ | CS0  | CS0            | Boot flash
+ | CS1  | CS_FLASH       | NAND flash
+ | CS2  | CS_DSP         | DSP
+ | CS3  | DCS_DRAM       | DRAM
+ | CS4  | CS_ER1         | External output register
+ +------+----------------+------------------------------------------------------------
+
+ Interrupts:
+
+ +------+----------------+------------------------------------------------------------
+ |  #   | Name           | Comment
+ +------+----------------+------------------------------------------------------------
+ | IRQ1 | UINTER_3V      | S interupt chips interrupt (common)
+ | IRQ3 | IRQ_DSP        | DSP interrupt
+ | IRQ4 | IRQ_DSP1       | Extra DSP interrupt
+ +------+----------------+------------------------------------------------------------
+
+*************************************************************************************************/
+
+#define DSP_SIZE	0x00010000	/* 64K */
+#define NAND_SIZE	0x00010000	/* 64K */
+#define ER_SIZE		0x00010000	/* 64K */
+#define DUMMY_SIZE	0x00010000	/* 64K */
+
+#define DSP_BASE	0xF1000000
+#define NAND_BASE	0xF1010000
+#define ER_BASE		0xF1020000
+#define DUMMY_BASE	0xF1FF0000
+
+/****************************************************************/
+
+/* NAND */
+#define CFG_NAND_BASE			NAND_BASE
+#define CONFIG_MTD_NAND_ECC_JFFS2
+
+#define CFG_MAX_NAND_DEVICE		1
+#define NAND_NO_RB
+
+#define SECTORSIZE		512
+#define ADDR_COLUMN		1
+#define ADDR_PAGE		2
+#define ADDR_COLUMN_PAGE	3
+#define NAND_ChipID_UNKNOWN 	0x00
+#define NAND_MAX_FLOORS		1
+#define NAND_MAX_CHIPS		1
+
+/* ALE = PD3, CLE = PD4, CE = PD5, F_RY_BY = PC13 */
+#define NAND_DISABLE_CE(nand) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 5)); \
+	} while(0)
+
+#define NAND_ENABLE_CE(nand) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 5)); \
+	} while(0)
+
+#define NAND_CTL_CLRALE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 3)); \
+	} while(0)
+
+#define NAND_CTL_SETALE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 3)); \
+	} while(0)
+
+#define NAND_CTL_CLRCLE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 4)); \
+	} while(0)
+
+#define NAND_CTL_SETCLE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 4)); \
+	} while(0)
+
+#ifndef NAND_NO_RB
+#define NAND_WAIT_READY(nand) \
+	do { \
+		while ((((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 13))) == 0) { \
+			WATCHDOG_RESET(); \
+		} \
+	} while (0)
+#else
+#define NAND_WAIT_READY(nand) udelay(12)
+#endif
+
+#define WRITE_NAND_COMMAND(d, adr) \
+	do { \
+		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+	} while(0)
+
+#define WRITE_NAND_ADDRESS(d, adr) \
+	do { \
+		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+	} while(0)
+
+#define WRITE_NAND(d, adr) \
+	do { \
+		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+	} while(0)
+
+#define READ_NAND(adr) \
+	((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
+
+/*****************************************************************************/
+
+#if 1
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ */
+
+#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
+#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
+#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
+#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	0x0100
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#endif
+
+/*************************************************************************************************/
+
+#define CONFIG_CDP_DEVICE_ID		20
+#define CONFIG_CDP_DEVICE_ID_PREFIX	"NT"	/* netta */
+#define CONFIG_CDP_PORT_ID		"eth%d"
+#define CONFIG_CDP_CAPABILITIES		0x00000010
+#define CONFIG_CDP_VERSION		"u-boot 1.0" " " __DATE__ " " __TIME__
+#define CONFIG_CDP_PLATFORM		"Intracom NetTA"
+#define CONFIG_CDP_TRIGGER		0x20020001
+#define CONFIG_CDP_POWER_CONSUMPTION	4300	/* 90 mA @ 48V */
+#define CONFIG_CDP_APPLIANCE_VLAN_TYPE	0x01	/* ipphone? */
+
+/*************************************************************************************************/
+
+#define CONFIG_AUTO_COMPLETE	1
+
+/*************************************************************************************************/
+
+#endif	/* __CONFIG_H */
--- a/include/configs/NETVIA.h
+++ b/include/configs/NETVIA.h
@@ -36,7 +36,6 @@

 #define CONFIG_MPC850		1	/* This is a MPC850 CPU		*/
 #define CONFIG_NETVIA		1	/* ...on a NetVia board		*/
-#undef  CONFIG_NETVIA_PLL_CLOCK		/* PLL or fixed crystal clock	*/

 #if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1
 #define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
@@ -49,14 +48,8 @@

 #define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/

-#ifdef CONFIG_NETVIA_PLL_CLOCK
-/* XXX make sure that you calculate these two correctly */
-#define CFG_GCLK_MF		1350
-#define CONFIG_8xx_GCLK_FREQ	44236800
-#else
-#define CFG_GCLK_MF		1
-#define CONFIG_8xx_GCLK_FREQ	50000000
-#endif
+#define CONFIG_XIN		10000000
+#define CONFIG_8xx_GCLK_FREQ	80000000

 #if 0
 #define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
@@ -253,22 +246,34 @@
 * Reset PLL lock status sticky bit, timer expired status bit and timer
 * interrupt status bit
 *
- */
-
-#define CFG_PLPRCR	( ((CFG_GCLK_MF-1) << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
 * SCCR - System Clock and reset Control Register		15-27
 *-----------------------------------------------------------------------
 * Set clock output, timebase and RTC source and divider,
 * power management and some other internal clocks
 */
+
 #define SCCR_MASK	SCCR_EBDF11
+
+#if CONFIG_8xx_GCLK_FREQ == 50000000
+
+#define CFG_PLPRCR	( ((5 - 1) << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 #define CFG_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)

+#elif CONFIG_8xx_GCLK_FREQ == 80000000
+
+#define CFG_PLPRCR	( ((8 - 1) << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CFG_SCCR	(SCCR_TBS     | \
+			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00 | SCCR_EBDF01)
+
+#endif
+
 /*-----------------------------------------------------------------------
 *
 *-----------------------------------------------------------------------
@@ -520,6 +525,6 @@ static inline void __led_set(led_id_t mask, int state)

 #endif

-/****************************************************************/
+/*************************************************************************************************/

 #endif	/* __CONFIG_H */
--- a/include/mpc8260.h
+++ b/include/mpc8260.h
@@ -34,8 +34,12 @@
 #define CPU_ID_STR	"MPC8255"
 #endif
 #ifndef CPU_ID_STR
+#if defined(CONFIG_MPC8272_FAMILY)
+#define CPU_ID_STR	"MPC8272"
+#else
 #define CPU_ID_STR	"MPC8260"
 #endif
+#endif /* !CPU_ID_STR */

 /*-----------------------------------------------------------------------
 * Exception offsets (PowerPC standard)
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2004
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
@@ -64,6 +64,8 @@
 # define CONFIG_PCMCIA_SLOT_B
 #elif defined(CONFIG_ATC)		/* The ATC use SLOT_A	*/
 # define CONFIG_PCMCIA_SLOT_A
+#elif defined(CONFIG_NETTA)
+# define CONFIG_PCMCIA_SLOT_A
 #else
 # error "PCMCIA Slot not configured"
 #endif
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2004
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
@@ -333,6 +333,9 @@ void status_led_set  (int led, int state);

 # define STATUS_LED_BOOT	0		/* LED 0 used for boot status */

+/*****  NetPhone   ********************************************************/
+#elif defined(CONFIG_NETPHONE)
+/* XXX empty just to avoid the error */
 /************************************************************************/
 #else
 # error Status LED configuration missing