Merge branch 'master' of git://git.denx.de/u-boot-x86

include/configs/crownbay.h

@@ -52,8 +52,20 @@
 #define CONFIG_MMC_SDMA
 #define CONFIG_CMD_MMC
 
+/* Topcliff Gigabit Ethernet */
+#define CONFIG_PCH_GBE
+#define CONFIG_PHYLIB
+
 /* Video is not supported */
 #undef CONFIG_VIDEO
 #undef CONFIG_CFB_CONSOLE
 
+/* Environment configuration */
+#undef CONFIG_ENV_IS_NOWHERE
+#undef CONFIG_ENV_SIZE
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE			0x1000
+#define CONFIG_ENV_SECT_SIZE		0x1000
+#define CONFIG_ENV_OFFSET		0
+
 #endif	/* __CONFIG_H */

include/configs/galileo.h

@@ -57,4 +57,17 @@
 #define CONFIG_MMC_SDMA
 #define CONFIG_CMD_MMC
 
+/* 10/100M Ethernet support */
+#define CONFIG_DESIGNWARE_ETH
+#define CONFIG_DW_ALTDESCRIPTOR
+#define CONFIG_PHYLIB
+
+/* Environment configuration */
+#undef CONFIG_ENV_IS_NOWHERE
+#undef CONFIG_ENV_SIZE
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE			0x1000
+#define CONFIG_ENV_SECT_SIZE		0x1000
+#define CONFIG_ENV_OFFSET		0
+
 #endif	/* __CONFIG_H */

include/configs/x86-common.h

@@ -243,7 +243,34 @@
 
 #define CONFIG_CMD_USB
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	CONFIG_STD_DEVICES_SETTINGS
+/* Default environment */
+#define CONFIG_ROOTPATH		"/opt/nfsroot"
+#define CONFIG_HOSTNAME		"x86"
+#define CONFIG_BOOTFILE		"bzImage"
+#define CONFIG_LOADADDR		0x1000000
+
+#define CONFIG_EXTRA_ENV_SETTINGS			\
+	CONFIG_STD_DEVICES_SETTINGS			\
+	"netdev=eth0\0"					\
+	"consoledev=ttyS0\0"				\
+	"othbootargs=acpi=off\0"			\
+	"ramdiskaddr=0x2000000\0"			\
+	"ramdiskfile=initramfs.gz\0"
+
+#define CONFIG_RAMBOOTCOMMAND				\
+	"setenv bootargs root=/dev/ram rw "		\
+	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+	"console=$consoledev,$baudrate $othbootargs;"	\
+	"tftpboot $loadaddr $bootfile;"			\
+	"tftpboot $ramdiskaddr $ramdiskfile;"		\
+	"zboot $loadaddr 0 $ramdiskaddr $filesize"
+
+#define CONFIG_NFSBOOTCOMMAND				\
+	"setenv bootargs root=/dev/nfs rw "		\
+	"nfsroot=$serverip:$rootpath "			\
+	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+	"console=$consoledev,$baudrate $othbootargs;"	\
+	"tftpboot $loadaddr $bootfile;"			\
+	"zboot $loadaddr"
 
 #endif	/* __CONFIG_H */

include/fdtdec.h

@@ -347,7 +347,10 @@ int fdtdec_get_pci_vendev(const void *blob, int node,
 
 /**
  * Look at the pci address of a device node that represents a PCI device
- * and parse the bus, device and function number from it.
+ * and parse the bus, device and function number from it. For some cases
+ * like the bus number encoded in reg property is not correct after pci
+ * enumeration, this function looks through the node's compatible strings
+ * to get these numbers extracted instead.
  *
  * @param blob		FDT blob
  * @param node		node to examine

include/net.h

@@ -191,6 +191,8 @@ struct ethernet_hdr {
 /* Ethernet header size */
 #define ETHER_HDR_SIZE	(sizeof(struct ethernet_hdr))
 
+#define ETH_FCS_LEN	4		/* Octets in the FCS		*/
+
 struct e802_hdr {
 	uchar		et_dest[6];	/* Destination node		*/
 	uchar		et_src[6];	/* Source node			*/

include/netdev.h

@@ -69,6 +69,7 @@ int natsemi_initialize(bd_t *bis);
 int ne2k_register(void);
 int npe_initialize(bd_t *bis);
 int ns8382x_initialize(bd_t *bis);
+int pch_gbe_register(bd_t *bis);
 int pcnet_initialize(bd_t *bis);
 int ppc_4xx_eth_initialize (bd_t *bis);
 int rtl8139_initialize(bd_t *bis);
@@ -123,6 +124,9 @@ static inline int pci_eth_init(bd_t *bis)
 #ifdef CONFIG_E1000
 	num += e1000_initialize(bis);
 #endif
+#ifdef CONFIG_PCH_GBE
+	num += pch_gbe_register(bis);
+#endif
 #ifdef CONFIG_PCNET
 	num += pcnet_initialize(bis);
 #endif

include/usb_ether.h

@@ -18,7 +18,6 @@
 #define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
 #define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
 #define ETH_FRAME_LEN	PKTSIZE_ALIGN	/* Max. octets in frame sans FCS */
-#define ETH_FCS_LEN	4		/* Octets in the FCS		 */
 
 struct ueth_data {
 	/* eth info */