diff --git a/board/siemens/iot2050/board.c b/board/siemens/iot2050/board.c
index 85cb999f17f..16082ae2afe 100644
--- a/board/siemens/iot2050/board.c
+++ b/board/siemens/iot2050/board.c
@@ -38,6 +38,8 @@ struct iot2050_info {
 	u8 mac_addr_cnt;
 	u8 mac_addr[8][ARP_HLEN];
 	char seboot_version[40 + 1];
+	u8 padding[3];
+	u32 ddr_size_mb;
 } __packed;
 
 /*
@@ -341,25 +343,42 @@ int board_init(void)
 
 int dram_init(void)
 {
-	if (board_is_advanced())
-		gd->ram_size = SZ_2G;
-	else
-		gd->ram_size = SZ_1G;
+	struct iot2050_info *info = IOT2050_INFO_DATA;
+	gd->ram_size = ((phys_size_t)(info->ddr_size_mb)) << 20;
 
 	return 0;
 }
 
+ulong board_get_usable_ram_top(ulong total_size)
+{
+	/* Limit RAM used by U-Boot to the DDR low region */
+	if (gd->ram_top > 0x100000000)
+		return 0x100000000;
+
+	return gd->ram_top;
+}
+
 int dram_init_banksize(void)
 {
 	dram_init();
 
-	/* Bank 0 declares the memory available in the DDR low region */
-	gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE;
-	gd->bd->bi_dram[0].size = gd->ram_size;
+	if (gd->ram_size > SZ_2G) {
+		/* Bank 0 declares the memory available in the DDR low region */
+		gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE;
+		gd->bd->bi_dram[0].size = SZ_2G;
 
-	/* Bank 1 declares the memory available in the DDR high region */
-	gd->bd->bi_dram[1].start = 0;
-	gd->bd->bi_dram[1].size = 0;
+		/* Bank 1 declares the memory available in the DDR high region */
+		gd->bd->bi_dram[1].start = CFG_SYS_SDRAM_BASE1;
+		gd->bd->bi_dram[1].size = gd->ram_size - SZ_2G;
+	} else {
+		/* Bank 0 declares the memory available in the DDR low region */
+		gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE;
+		gd->bd->bi_dram[0].size = gd->ram_size;
+
+		/* Bank 1 declares the memory available in the DDR high region */
+		gd->bd->bi_dram[1].start = 0;
+		gd->bd->bi_dram[1].size = 0;
+	}
 
 	return 0;
 }
diff --git a/doc/board/siemens/iot2050.rst b/doc/board/siemens/iot2050.rst
index ee3c5c95846..d0c0a412097 100644
--- a/doc/board/siemens/iot2050.rst
+++ b/doc/board/siemens/iot2050.rst
@@ -29,6 +29,9 @@ The following binaries from that source need to be present in the build folder:
  - seboot_pg1.bin
  - seboot_pg2.bin
 
+Note that SE-Boot D/V01.04.01.02 or greater is required, otherwise the DDR size
+will not be picked up correctly by U-Boot.
+
 When using the watchdog, a related firmware for the R5 core(s) is needed, e.g.
 https://github.com/siemens/k3-rti-wdt. The name and location of the image is
 configured via CONFIG_WDT_K3_RTI_FW_FILE.
diff --git a/include/configs/iot2050.h b/include/configs/iot2050.h
index 0f92e0d25dc..5c58c7bbaab 100644
--- a/include/configs/iot2050.h
+++ b/include/configs/iot2050.h
@@ -24,6 +24,9 @@
 	func(USB, usb, 2)
 #endif
 
+/* DDR Configuration */
+#define CFG_SYS_SDRAM_BASE1		0x880000000
+
 /*
  * This defines all MMC devices, even if the basic variant has no mmc1.
  * The non-supported device will be removed from the boot targets during