Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig

Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2026-06-13 15:03:58 +03:00 · 2016-09-12 23:18:39 -06:00
parent ae56db5f1c
commit 53b5bf3c1d
137 changed files with 116 additions and 38 deletions
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -189,7 +189,6 @@
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT

 #define CONFIG_SYS_MONITOR_LEN		0x80000

--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -232,7 +232,6 @@

 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

 #define CONFIG_SPL_BOARD_INIT
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -232,7 +232,6 @@

 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

 #define CONFIG_SPL_BOARD_INIT
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -26,7 +26,6 @@
 #define CONFIG_OMAP_WATCHDOG
 #define CONFIG_SPL_WATCHDOG_SUPPORT

-#define CONFIG_SPL_GPIO_SUPPORT
 /* Bootcount using the RTC block */
 #define CONFIG_SYS_BOOTCOUNT_ADDR	0x44E3E000
 #define CONFIG_BOOTCOUNT_LIMIT
--- a/include/configs/brxre1.h
+++ b/include/configs/brxre1.h
@@ -42,7 +42,6 @@
 #define CONFIG_SYS_OMAP24_I2C_SPEED_PSOC	20000

 /* GPIO */
-#define CONFIG_SPL_GPIO_SUPPORT

 /* MMC/SD IP block */
 #define CONFIG_MMC
--- a/include/configs/chromebook_jerry.h
+++ b/include/configs/chromebook_jerry.h
@@ -22,8 +22,6 @@

 #define CONFIG_CMD_SF_TEST

-#undef CONFIG_SPL_GPIO_SUPPORT
-
 #define CONFIG_KEYBOARD

 #define CONFIG_SPL_POWER_SUPPORT
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -316,7 +316,6 @@
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_OMAP3_ID_NAND
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -91,7 +91,6 @@

 #include <configs/ti_armv7_omap.h>
 #undef CONFIG_SPL_OS_BOOT
-#undef CONFIG_SPL_GPIO_SUPPORT
 #undef CONFIG_SPL_NAND_SUPPORT
 #undef CONFIG_SYS_MONITOR_LEN
 #undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -165,7 +165,6 @@
 #define CONFIG_SPL_SERIAL_SUPPORT

 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -58,7 +58,6 @@
 #define CONFIG_SUPPORT_EMMC_BOOT

 #define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT

 /* specific .lds file */
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -33,7 +33,6 @@
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_WATCHDOG_SUPPORT

 /* NAND support */
--- a/include/configs/ipam390.h
+++ b/include/configs/ipam390.h
@@ -309,7 +309,6 @@
 #define CONFIG_CMD_SPL_WRITE_SIZE	0x400

 /* GPIO support */
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_DA8XX_GPIO
 #define CONFIG_IPAM390_GPIO_BOOTMODE	((16 * 7) + 14)

--- a/include/configs/kc1.h
+++ b/include/configs/kc1.h
@@ -134,7 +134,6 @@
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT

--- a/include/configs/m53evk.h
+++ b/include/configs/m53evk.h
@@ -239,7 +239,6 @@
 #define CONFIG_SPL_TEXT_BASE		0x70008000
 #define CONFIG_SPL_PAD_TO		0x8000
 #define CONFIG_SPL_STACK		0x70004000
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
--- a/include/configs/ma5d4evk.h
+++ b/include/configs/ma5d4evk.h
@@ -218,7 +218,6 @@

 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

 #define CONFIG_SPL_BOARD_INIT
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -52,7 +52,6 @@
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT

 /* Memory sizes */
 #define CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */
--- a/include/configs/picosam9g45.h
+++ b/include/configs/picosam9g45.h
@@ -166,7 +166,6 @@
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_WATCHDOG_SUPPORT

 #define CONFIG_SYS_MONITOR_LEN		0x80000
--- a/include/configs/sama5d2_ptc.h
+++ b/include/configs/sama5d2_ptc.h
@@ -123,7 +123,6 @@

 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

 #define CONFIG_SPL_BOARD_INIT
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -127,7 +127,6 @@

 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

 #define CONFIG_SPL_BOARD_INIT
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -126,7 +126,6 @@

 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

 #define CONFIG_SPL_BOARD_INIT
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -166,7 +166,6 @@

 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

 #define CONFIG_SPL_BOARD_INIT
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -126,7 +126,6 @@

 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

 #define CONFIG_SPL_BOARD_INIT
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -124,7 +124,6 @@

 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

 #define CONFIG_SPL_BOARD_INIT
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -143,7 +143,6 @@
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_YMODEM_SUPPORT

-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_WATCHDOG_SUPPORT

 #define CONFIG_SPL_SPI_SUPPORT
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -243,7 +243,6 @@
 #define CONFIG_SPL_LIBGENERIC_SUPPORT

 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL	(2*32 + 14)
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_USE_NANDFLASH	1
--- a/include/configs/sniper.h
+++ b/include/configs/sniper.h
@@ -142,7 +142,6 @@
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT

--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -293,7 +293,6 @@ extern int soft_i2c_gpio_scl;

 /* GPIO */
 #define CONFIG_SUNXI_GPIO
-#define CONFIG_SPL_GPIO_SUPPORT

 #ifdef CONFIG_VIDEO
 /*
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -207,7 +207,6 @@
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -298,7 +298,6 @@
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_OMAP3_ID_NAND
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -263,7 +263,6 @@
 #define CONFIG_SPL_SERIAL_SUPPORT

 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL	(2*32 + 14)
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_USE_NANDFLASH	1
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -125,7 +125,6 @@
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT

 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -172,7 +172,6 @@
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_YMODEM_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 #define CONFIG_SYS_SPI_U_BOOT_SIZE	0x40000
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -138,7 +138,6 @@
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_YMODEM_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS  0x20000
 #define CONFIG_SYS_SPI_U_BOOT_SIZE  0x40000
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -273,7 +273,6 @@
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_BOARD_INIT

 #ifdef CONFIG_NAND
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -313,7 +313,6 @@
 #undef CONFIG_GENERIC_MMC

 /* And no support for GPIO, yet.. */
-#undef CONFIG_SPL_GPIO_SUPPORT

 /* we may include files below only after all above definitions */
 #include <asm/arch/hardware.h>
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -319,7 +319,6 @@
 #define CONFIG_SPL_NAND_SIMPLE

 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #define CONFIG_SPL_I2C_SUPPORT
--- a/include/configs/woodburn_sd.h
+++ b/include/configs/woodburn_sd.h
@@ -30,7 +30,6 @@
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x100 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400 /* 512 KB */
-#define	CONFIG_SPL_GPIO_SUPPORT

 #define CONFIG_SPL_TEXT_BASE		0x10002300
 #define CONFIG_SPL_MAX_SIZE		(64 * 1024)	/* 8 KB for stack */