mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2026-06-13 15:03:58 +03:00
board: tegra: convert boards to text env
Convert boards to use text based env. This is the first stage of conversion, common inclusions should be converted next. Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Apalis TK1 Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
This commit is contained in:
Svyatoslav Ryhel
@@ -18,64 +18,6 @@
|
||||
#define FDT_MODULE "apalis-v1.2"
|
||||
#define FDT_MODULE_V1_0 "apalis"
|
||||
|
||||
/*
|
||||
* Custom Distro Boot configuration:
|
||||
* 1. 8bit SD port (MMC1)
|
||||
* 2. 4bit SD port (MMC2)
|
||||
* 3. eMMC (MMC0)
|
||||
*/
|
||||
#define BOOT_TARGET_DEVICES(func) \
|
||||
func(MMC, mmc, 1) \
|
||||
func(MMC, mmc, 2) \
|
||||
func(MMC, mmc, 0) \
|
||||
func(USB, usb, 0) \
|
||||
func(PXE, pxe, na) \
|
||||
func(DHCP, dhcp, na)
|
||||
|
||||
#define DFU_ALT_EMMC_INFO "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \
|
||||
"boot part 0 1 mmcpart 0; " \
|
||||
"rootfs part 0 2 mmcpart 0; " \
|
||||
"zImage fat 0 1 mmcpart 0; " \
|
||||
"tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
|
||||
|
||||
#define UBOOT_UPDATE \
|
||||
"uboot_hwpart=1\0" \
|
||||
"uboot_blk=0\0" \
|
||||
"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
|
||||
"setexpr blkcnt ${blkcnt} / 0x200\0" \
|
||||
"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
|
||||
"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
|
||||
|
||||
#define BOARD_EXTRA_ENV_SETTINGS \
|
||||
"boot_file=zImage\0" \
|
||||
"boot_script_dhcp=boot.scr\0" \
|
||||
"console=ttyS0\0" \
|
||||
"defargs=lp0_vec=2064@0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \
|
||||
"usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \
|
||||
"user_debug=30 pcie_aspm=off\0" \
|
||||
"dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
|
||||
"fdt_board=eval\0" \
|
||||
"fdt_fixup=;\0" \
|
||||
"fdt_module=" FDT_MODULE "\0" \
|
||||
UBOOT_UPDATE \
|
||||
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
|
||||
"00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
|
||||
"flash_eth.img && source ${loadaddr}\0" \
|
||||
"setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \
|
||||
"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \
|
||||
"|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1 " \
|
||||
"${loadaddr} flash_blk.img && " \
|
||||
"source ${loadaddr}\0" \
|
||||
"setup=setenv setupargs igb_mac=${ethaddr} " \
|
||||
"consoleblank=0 no_console_suspend=1 console=tty1 " \
|
||||
"console=${console},${baudrate}n8 debug_uartport=lsport,0 " \
|
||||
"${memargs}\0" \
|
||||
"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
|
||||
"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
|
||||
"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
|
||||
"source ${loadaddr}\0" \
|
||||
"vidargs=fbcon=map:1\0"
|
||||
|
||||
#include "tegra-common-post.h"
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
||||
@@ -22,18 +22,6 @@
|
||||
*/
|
||||
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
|
||||
|
||||
#define UBOOT_UPDATE \
|
||||
"uboot_hwpart=1\0" \
|
||||
"uboot_blk=0\0" \
|
||||
"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
|
||||
"setexpr blkcnt ${blkcnt} / 0x200\0" \
|
||||
"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
|
||||
"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
|
||||
|
||||
#define BOARD_EXTRA_ENV_SETTINGS \
|
||||
UBOOT_UPDATE \
|
||||
"boot_script_dhcp=boot.scr\0"
|
||||
|
||||
#include "tegra-common-post.h"
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
||||
@@ -13,10 +13,6 @@
|
||||
/* High-level configuration options */
|
||||
#define CFG_TEGRA_BOARD_STRING "NVIDIA Cardhu"
|
||||
|
||||
#define BOARD_EXTRA_ENV_SETTINGS \
|
||||
"board_name=cardhu-a04\0" \
|
||||
"fdtfile=tegra30-cardhu-a04.dtb\0"
|
||||
|
||||
/* Board-specific serial config */
|
||||
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
|
||||
|
||||
|
||||
@@ -13,17 +13,6 @@
|
||||
/* Board-specific serial config */
|
||||
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
|
||||
|
||||
/* NAND support */
|
||||
|
||||
#define UBOOT_UPDATE \
|
||||
"update_uboot=nand erase.part u-boot && " \
|
||||
"nand write ${loadaddr} u-boot ${filesize}\0" \
|
||||
|
||||
/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
|
||||
#define BOARD_EXTRA_ENV_SETTINGS \
|
||||
"boot_script_dhcp=boot.scr\0" \
|
||||
UBOOT_UPDATE
|
||||
|
||||
#include "tegra-common-post.h"
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
||||
@@ -23,18 +23,6 @@
|
||||
*/
|
||||
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
|
||||
|
||||
#define UBOOT_UPDATE \
|
||||
"uboot_hwpart=1\0" \
|
||||
"uboot_blk=0\0" \
|
||||
"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
|
||||
"setexpr blkcnt ${blkcnt} / 0x200\0" \
|
||||
"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
|
||||
"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
|
||||
|
||||
#define BOARD_EXTRA_ENV_SETTINGS \
|
||||
UBOOT_UPDATE \
|
||||
"boot_script_dhcp=boot.scr\0"
|
||||
|
||||
#include "tegra-common-post.h"
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
||||
@@ -10,54 +10,11 @@
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <linux/sizes.h>
|
||||
|
||||
#include "tegra30-common.h"
|
||||
|
||||
/* High-level configuration options */
|
||||
#define CFG_TEGRA_BOARD_STRING "HTC One X"
|
||||
|
||||
#define ENDEAVORU_FLASH_UBOOT \
|
||||
"flash_uboot=echo Preparing RAM;" \
|
||||
"mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
|
||||
"mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
|
||||
"echo Reading BCT;" \
|
||||
"mmc dev 0 1;" \
|
||||
"mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
|
||||
"echo Reading bootloader;" \
|
||||
"if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \
|
||||
"then echo Calculating bootloader size;" \
|
||||
"size mmc 0:1 ${bootloader_file};" \
|
||||
"ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
|
||||
"echo Writing bootloader to eMMC;" \
|
||||
"mmc dev 0 1;" \
|
||||
"mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
|
||||
"mmc dev 0 2;" \
|
||||
"mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
|
||||
"echo Bootloader written successfully;" \
|
||||
"pause 'Press ANY key to reboot device...'; reset;" \
|
||||
"else echo Reading bootloader failed;" \
|
||||
"pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
|
||||
|
||||
#define ENDEAVORU_BOOTMENU \
|
||||
ENDEAVORU_FLASH_UBOOT \
|
||||
"bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
|
||||
"bootmenu_1=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
|
||||
"bootmenu_2=update bootloader=run flash_uboot\0" \
|
||||
"bootmenu_3=reboot RCM=enterrcm\0" \
|
||||
"bootmenu_4=reboot=reset\0" \
|
||||
"bootmenu_5=power off=poweroff\0" \
|
||||
"bootmenu_delay=-1\0"
|
||||
|
||||
#define BOARD_EXTRA_ENV_SETTINGS \
|
||||
"boot_block_size_r=0x200000\0" \
|
||||
"boot_block_size=0x1000\0" \
|
||||
"bootloader_file=u-boot-dtb-tegra.bin\0" \
|
||||
"button_cmd_0_name=Volume Down\0" \
|
||||
"button_cmd_0=bootmenu\0" \
|
||||
"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
|
||||
ENDEAVORU_BOOTMENU
|
||||
|
||||
/* Board-specific serial config */
|
||||
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
|
||||
|
||||
|
||||
@@ -6,56 +6,11 @@
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <linux/sizes.h>
|
||||
|
||||
#include "tegra30-common.h"
|
||||
|
||||
/* High-level configuration options */
|
||||
#define CFG_TEGRA_BOARD_STRING "ASUS Google Nexus 7 (2012)"
|
||||
|
||||
#define GROUPER_FLASH_UBOOT \
|
||||
"flash_uboot=echo Preparing RAM;" \
|
||||
"mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
|
||||
"mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
|
||||
"echo Reading BCT;" \
|
||||
"mmc dev 0 1;" \
|
||||
"mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
|
||||
"echo Reading bootloader;" \
|
||||
"if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \
|
||||
"then echo Calculating bootloader size;" \
|
||||
"size mmc 0:1 ${bootloader_file};" \
|
||||
"ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
|
||||
"echo Writing bootloader to eMMC;" \
|
||||
"mmc dev 0 1;" \
|
||||
"mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
|
||||
"mmc dev 0 2;" \
|
||||
"mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
|
||||
"echo Bootloader written successfully;" \
|
||||
"pause 'Press ANY key to reboot device...'; reset;" \
|
||||
"else echo Reading bootloader failed;" \
|
||||
"pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
|
||||
|
||||
#define GROUPER_BOOTMENU \
|
||||
GROUPER_FLASH_UBOOT \
|
||||
"bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
|
||||
"bootmenu_1=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
|
||||
"bootmenu_2=update bootloader=run flash_uboot\0" \
|
||||
"bootmenu_3=reboot RCM=enterrcm\0" \
|
||||
"bootmenu_4=reboot=reset\0" \
|
||||
"bootmenu_5=power off=poweroff\0" \
|
||||
"bootmenu_delay=-1\0"
|
||||
|
||||
#define BOARD_EXTRA_ENV_SETTINGS \
|
||||
"boot_block_size_r=0x200000\0" \
|
||||
"boot_block_size=0x1000\0" \
|
||||
"bootloader_file=u-boot-dtb-tegra.bin\0" \
|
||||
"button_cmd_0_name=Volume Down\0" \
|
||||
"button_cmd_0=bootmenu\0" \
|
||||
"button_cmd_1_name=Lid\0" \
|
||||
"button_cmd_1=poweroff\0" \
|
||||
"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
|
||||
GROUPER_BOOTMENU
|
||||
|
||||
/* Board-specific serial config */
|
||||
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
|
||||
|
||||
|
||||
@@ -11,64 +11,6 @@
|
||||
/* High-level configuration options */
|
||||
#define CFG_TEGRA_BOARD_STRING "Lenovo Ideapad Yoga 11"
|
||||
|
||||
#define IDEAPAD_FLASH_UBOOT \
|
||||
"flash_uboot=sf probe 0:1;" \
|
||||
"echo Dumping current SPI flash content ...;" \
|
||||
"sf read ${kernel_addr_r} 0x0 ${spi_size};" \
|
||||
"if fatwrite mmc 1:1 ${kernel_addr_r} spi-flash-backup.bin ${spi_size};" \
|
||||
"then echo SPI flash content was successfully written into spi-flash-backup.bin;" \
|
||||
"echo Reading SPI flash binary;" \
|
||||
"if load mmc 1:1 ${kernel_addr_r} repart-block.bin;" \
|
||||
"then echo Writing bootloader into SPI flash;" \
|
||||
"sf probe 0:1;" \
|
||||
"sf update ${kernel_addr_r} 0x0 ${spi_size};" \
|
||||
"echo Bootloader SUCCESSFULLY written into SPI flash;" \
|
||||
"pause 'Press ANY key to reboot...'; reset;" \
|
||||
"else echo Preparing RAM;" \
|
||||
"mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
|
||||
"mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
|
||||
"echo Reading BCT;" \
|
||||
"sf read ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
|
||||
"echo Reading bootloader;" \
|
||||
"if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \
|
||||
"then echo Calculating bootloader size;" \
|
||||
"size mmc 1:1 ${bootloader_file};" \
|
||||
"ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
|
||||
"echo Writing bootloader into SPI flash;" \
|
||||
"sf probe 0:1;" \
|
||||
"sf update ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
|
||||
"sf update ${ramdisk_addr_r} ${boot_block_size_r} ${boot_block_size_r};" \
|
||||
"echo Bootloader written SUCCESSFULLY;" \
|
||||
"pause 'Press ANY key to reboot...'; reset;" \
|
||||
"else echo Reading bootloader failed;" \
|
||||
"pause 'Press ANY key to reboot...'; reset; fi;" \
|
||||
"fi;" \
|
||||
"else echo SPI flash backup FAILED! Aborting ...;" \
|
||||
"pause 'Press ANY key to reboot...'; reset; fi\0"
|
||||
|
||||
#define IDEAPAD_BOOTMENU \
|
||||
IDEAPAD_FLASH_UBOOT \
|
||||
"bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
|
||||
"bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
|
||||
"bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
|
||||
"bootmenu_3=update bootloader=run flash_uboot\0" \
|
||||
"bootmenu_4=reboot RCM=enterrcm\0" \
|
||||
"bootmenu_5=reboot=reset\0" \
|
||||
"bootmenu_6=power off=poweroff\0" \
|
||||
"bootmenu_delay=-1\0"
|
||||
|
||||
#define BOARD_EXTRA_ENV_SETTINGS \
|
||||
"spi_size=0x400000\0" \
|
||||
"boot_block_size_r=0x200000\0" \
|
||||
"boot_block_size=0x1000\0" \
|
||||
"bootloader_file=u-boot-dtb-tegra.bin\0" \
|
||||
"button_cmd_0_name=Volume Down\0" \
|
||||
"button_cmd_0=bootmenu\0" \
|
||||
"button_cmd_1_name=Lid sensor\0" \
|
||||
"button_cmd_1=poweroff\0" \
|
||||
"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
|
||||
IDEAPAD_BOOTMENU
|
||||
|
||||
/* Board-specific serial config */
|
||||
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
|
||||
|
||||
|
||||
@@ -15,26 +15,6 @@
|
||||
|
||||
/* Environment in eMMC, at the end of 2nd "boot sector" */
|
||||
|
||||
#define BOARD_EXTRA_ENV_SETTINGS \
|
||||
"calculated_vars=kernel_addr_r fdt_addr_r scriptaddr pxefile_addr_r " \
|
||||
"ramdisk_addr_r\0" \
|
||||
"kernel_addr_r_align=00200000\0" \
|
||||
"kernel_addr_r_offset=00080000\0" \
|
||||
"kernel_addr_r_size=02000000\0" \
|
||||
"kernel_addr_r_aliases=loadaddr\0" \
|
||||
"fdt_addr_r_align=00200000\0" \
|
||||
"fdt_addr_r_offset=00000000\0" \
|
||||
"fdt_addr_r_size=00200000\0" \
|
||||
"scriptaddr_align=00200000\0" \
|
||||
"scriptaddr_offset=00000000\0" \
|
||||
"scriptaddr_size=00200000\0" \
|
||||
"pxefile_addr_r_align=00200000\0" \
|
||||
"pxefile_addr_r_offset=00000000\0" \
|
||||
"pxefile_addr_r_size=00200000\0" \
|
||||
"ramdisk_addr_r_align=00200000\0" \
|
||||
"ramdisk_addr_r_offset=00000000\0" \
|
||||
"ramdisk_addr_r_size=02000000\0"
|
||||
|
||||
#include "tegra-common-post.h"
|
||||
|
||||
#endif
|
||||
|
||||
@@ -15,19 +15,6 @@
|
||||
|
||||
/* Board-specific serial config */
|
||||
|
||||
/* Only MMC/PXE/DHCP for now, add USB back in later when supported */
|
||||
#define BOOT_TARGET_DEVICES(func) \
|
||||
func(MMC, mmc, 1) \
|
||||
func(MMC, mmc, 0) \
|
||||
func(PXE, pxe, na) \
|
||||
func(DHCP, dhcp, na)
|
||||
|
||||
#define BOARD_EXTRA_ENV_SETTINGS \
|
||||
"preboot=if test -e mmc 1:1 /u-boot-preboot.scr; then " \
|
||||
"load mmc 1:1 ${scriptaddr} /u-boot-preboot.scr; " \
|
||||
"source ${scriptaddr}; " \
|
||||
"fi\0"
|
||||
|
||||
/* General networking support */
|
||||
#include "tegra-common-post.h"
|
||||
|
||||
|
||||
@@ -15,48 +15,6 @@
|
||||
/* High-level configuration options */
|
||||
#define CFG_TEGRA_BOARD_STRING "Wexler QC750"
|
||||
|
||||
#define QC750_FLASH_UBOOT \
|
||||
"flash_uboot=echo Preparing RAM;" \
|
||||
"mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
|
||||
"mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
|
||||
"echo Reading BCT;" \
|
||||
"mmc dev 0 1;" \
|
||||
"mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
|
||||
"echo Reading bootloader;" \
|
||||
"if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \
|
||||
"then echo Calculating bootloader size;" \
|
||||
"size mmc 1:1 ${bootloader_file};" \
|
||||
"ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
|
||||
"echo Writing bootloader to eMMC;" \
|
||||
"mmc dev 0 1;" \
|
||||
"mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
|
||||
"mmc dev 0 2;" \
|
||||
"mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
|
||||
"echo Bootloader written successfully;" \
|
||||
"pause 'Press ANY key to reboot device...'; reset;" \
|
||||
"else echo Reading bootloader failed;" \
|
||||
"pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
|
||||
|
||||
#define QC750_BOOTMENU \
|
||||
QC750_FLASH_UBOOT \
|
||||
"bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
|
||||
"bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
|
||||
"bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
|
||||
"bootmenu_3=update bootloader=run flash_uboot\0" \
|
||||
"bootmenu_4=reboot RCM=enterrcm\0" \
|
||||
"bootmenu_5=reboot=reset\0" \
|
||||
"bootmenu_6=power off=poweroff\0" \
|
||||
"bootmenu_delay=-1\0"
|
||||
|
||||
#define BOARD_EXTRA_ENV_SETTINGS \
|
||||
"boot_block_size_r=0x200000\0" \
|
||||
"boot_block_size=0x1000\0" \
|
||||
"bootloader_file=u-boot-dtb-tegra.bin\0" \
|
||||
"button_cmd_0_name=Volume Down\0" \
|
||||
"button_cmd_0=bootmenu\0" \
|
||||
"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
|
||||
QC750_BOOTMENU
|
||||
|
||||
/* Board-specific serial config */
|
||||
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
|
||||
|
||||
|
||||
@@ -13,24 +13,6 @@
|
||||
/* High-level configuration options */
|
||||
#define CFG_TEGRA_BOARD_STRING "Microsoft Surface RT"
|
||||
|
||||
#define SURFACE_RT_BOOTMENU \
|
||||
"bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
|
||||
"bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
|
||||
"bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
|
||||
"bootmenu_3=boot from USB=usb reset; usb start; bootflow scan\0" \
|
||||
"bootmenu_4=reboot RCM=enterrcm\0" \
|
||||
"bootmenu_5=reboot=reset\0" \
|
||||
"bootmenu_6=power off=poweroff\0" \
|
||||
"bootmenu_delay=-1\0"
|
||||
|
||||
#define BOARD_EXTRA_ENV_SETTINGS \
|
||||
"button_cmd_0_name=Volume Down\0" \
|
||||
"button_cmd_0=bootmenu\0" \
|
||||
"button_cmd_1_name=Hall Sensor\0" \
|
||||
"button_cmd_1=poweroff\0" \
|
||||
"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
|
||||
SURFACE_RT_BOOTMENU
|
||||
|
||||
/* Board-specific serial config */
|
||||
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
|
||||
|
||||
|
||||
@@ -1,91 +0,0 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* Copyright (c) 2022, Svyatoslav Ryhel <clamor95@gmail.com>.
|
||||
*/
|
||||
|
||||
#ifndef __TRANSFORMER_COMMON_H
|
||||
#define __TRANSFORMER_COMMON_H
|
||||
|
||||
/* High-level configuration options */
|
||||
#define CFG_TEGRA_BOARD_STRING "ASUS Transformer"
|
||||
|
||||
#define TRANSFORMER_FLASH_UBOOT \
|
||||
"flash_uboot=echo Preparing RAM;" \
|
||||
"mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
|
||||
"mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
|
||||
"echo Reading BCT;" \
|
||||
"mmc dev 0 1;" \
|
||||
"mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
|
||||
"echo Reading bootloader;" \
|
||||
"if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \
|
||||
"then echo Calculating bootloader size;" \
|
||||
"size mmc 1:1 ${bootloader_file};" \
|
||||
"ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
|
||||
"echo Writing bootloader to eMMC;" \
|
||||
"mmc dev 0 1;" \
|
||||
"mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
|
||||
"mmc dev 0 2;" \
|
||||
"mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
|
||||
"echo Bootloader written successfully;" \
|
||||
"pause 'Press ANY key to reboot device...'; reset;" \
|
||||
"else echo Reading bootloader failed;" \
|
||||
"pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
|
||||
|
||||
#define TRANSFORMER_FLASH_SPI \
|
||||
"update_spi=sf probe 0:1;" \
|
||||
"echo Dumping current SPI flash content ...;" \
|
||||
"sf read ${kernel_addr_r} 0x0 ${spi_size};" \
|
||||
"if fatwrite mmc 1:1 ${kernel_addr_r} spi-flash-backup.bin ${spi_size};" \
|
||||
"then echo SPI flash content was successfully written into spi-flash-backup.bin;" \
|
||||
"echo Reading SPI flash binary;" \
|
||||
"if load mmc 1:1 ${kernel_addr_r} repart-block.bin;" \
|
||||
"then echo Writing bootloader into SPI flash;" \
|
||||
"sf probe 0:1;" \
|
||||
"sf update ${kernel_addr_r} 0x0 ${spi_size};" \
|
||||
"poweroff;" \
|
||||
"else echo Preparing RAM;" \
|
||||
"mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
|
||||
"mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
|
||||
"echo Reading BCT;" \
|
||||
"sf read ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
|
||||
"echo Reading bootloader;" \
|
||||
"if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \
|
||||
"then echo Calculating bootloader size;" \
|
||||
"size mmc 1:1 ${bootloader_file};" \
|
||||
"ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
|
||||
"echo Writing bootloader into SPI flash;" \
|
||||
"sf probe 0:1;" \
|
||||
"sf update ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
|
||||
"sf update ${ramdisk_addr_r} ${boot_block_size_r} ${boot_block_size_r};" \
|
||||
"echo Bootloader written successfully; poweroff;" \
|
||||
"else echo Reading bootloader failed;" \
|
||||
"poweroff; fi;" \
|
||||
"fi;" \
|
||||
"else echo SPI flash backup FAILED! Aborting ...;" \
|
||||
"poweroff; fi\0"
|
||||
|
||||
#define TRANSFORMER_BOOTMENU \
|
||||
TRANSFORMER_FLASH_UBOOT \
|
||||
TRANSFORMER_FLASH_SPI \
|
||||
"bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
|
||||
"bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
|
||||
"bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
|
||||
"bootmenu_3=update bootloader=run flash_uboot\0" \
|
||||
"bootmenu_4=reboot RCM=enterrcm\0" \
|
||||
"bootmenu_5=reboot=reset\0" \
|
||||
"bootmenu_6=power off=poweroff\0" \
|
||||
"bootmenu_delay=-1\0"
|
||||
|
||||
#define BOARD_EXTRA_ENV_SETTINGS \
|
||||
"spi_size=0x400000\0" \
|
||||
"boot_block_size_r=0x200000\0" \
|
||||
"boot_block_size=0x1000\0" \
|
||||
"bootloader_file=u-boot-dtb-tegra.bin\0" \
|
||||
"button_cmd_0_name=Volume Down\0" \
|
||||
"button_cmd_0=bootmenu\0" \
|
||||
"button_cmd_1_name=Lid sensor\0" \
|
||||
"button_cmd_1=poweroff\0" \
|
||||
"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
|
||||
TRANSFORMER_BOOTMENU
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
@@ -11,7 +11,9 @@
|
||||
#define __CONFIG_H
|
||||
|
||||
#include "tegra20-common.h"
|
||||
#include "transformer-common.h"
|
||||
|
||||
/* High-level configuration options */
|
||||
#define CFG_TEGRA_BOARD_STRING "ASUS Transformer"
|
||||
|
||||
/* Board-specific serial config */
|
||||
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
|
||||
|
||||
@@ -10,10 +10,10 @@
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <linux/sizes.h>
|
||||
|
||||
#include "tegra30-common.h"
|
||||
#include "transformer-common.h"
|
||||
|
||||
/* High-level configuration options */
|
||||
#define CFG_TEGRA_BOARD_STRING "ASUS Transformer"
|
||||
|
||||
/* Board-specific serial config */
|
||||
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
|
||||
|
||||
@@ -10,55 +10,11 @@
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <linux/sizes.h>
|
||||
|
||||
#include "tegra30-common.h"
|
||||
|
||||
/* High-level configuration options */
|
||||
#define CFG_TEGRA_BOARD_STRING "LG X3 Board"
|
||||
|
||||
#define X3_FLASH_UBOOT \
|
||||
"flash_uboot=echo Preparing RAM;" \
|
||||
"mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
|
||||
"mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
|
||||
"echo Reading BCT;" \
|
||||
"mmc dev 0 1;" \
|
||||
"mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
|
||||
"echo Reading bootloader;" \
|
||||
"if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \
|
||||
"then echo Calculating bootloader size;" \
|
||||
"size mmc 0:1 ${bootloader_file};" \
|
||||
"ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
|
||||
"echo Writing bootloader to eMMC;" \
|
||||
"mmc dev 0 1;" \
|
||||
"mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
|
||||
"mmc dev 0 2;" \
|
||||
"mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
|
||||
"echo Bootloader written successfully;" \
|
||||
"pause 'Press ANY key to reboot device...'; reset;" \
|
||||
"else echo Reading bootloader failed;" \
|
||||
"pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
|
||||
|
||||
#define X3_BOOTMENU \
|
||||
X3_FLASH_UBOOT \
|
||||
"bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
|
||||
"bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
|
||||
"bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
|
||||
"bootmenu_3=update bootloader=run flash_uboot\0" \
|
||||
"bootmenu_4=reboot RCM=enterrcm\0" \
|
||||
"bootmenu_5=reboot=reset\0" \
|
||||
"bootmenu_6=power off=poweroff\0" \
|
||||
"bootmenu_delay=-1\0"
|
||||
|
||||
#define BOARD_EXTRA_ENV_SETTINGS \
|
||||
"boot_block_size_r=0x200000\0" \
|
||||
"boot_block_size=0x1000\0" \
|
||||
"bootloader_file=u-boot-dtb-tegra.bin\0" \
|
||||
"button_cmd_0_name=Volume Down\0" \
|
||||
"button_cmd_0=bootmenu\0" \
|
||||
"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
|
||||
X3_BOOTMENU
|
||||
|
||||
/* Board-specific serial config */
|
||||
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
|
||||
|
||||
|
||||
60
include/env/nvidia/prod_upd.env
vendored
Normal file
60
include/env/nvidia/prod_upd.env
vendored
Normal file
@@ -0,0 +1,60 @@
|
||||
boot_block_size_r=0x200000
|
||||
boot_block_size=0x1000
|
||||
bootloader_file=u-boot-dtb-tegra.bin
|
||||
spi_size=0x400000
|
||||
boot_dev=0
|
||||
|
||||
flash_uboot=echo Preparing RAM;
|
||||
mw ${kernel_addr_r} 0 ${boot_block_size_r};
|
||||
mw ${ramdisk_addr_r} 0 ${boot_block_size_r};
|
||||
echo Reading BCT;
|
||||
mmc dev 0 1;
|
||||
mmc read ${kernel_addr_r} 0 ${boot_block_size};
|
||||
echo Reading bootloader;
|
||||
if load mmc ${boot_dev}:1 ${ramdisk_addr_r} ${bootloader_file};
|
||||
then echo Calculating bootloader size;
|
||||
size mmc ${boot_dev}:1 ${bootloader_file};
|
||||
ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};
|
||||
echo Writing bootloader to eMMC;
|
||||
mmc dev 0 1;
|
||||
mmc write ${kernel_addr_r} 0 ${boot_block_size};
|
||||
mmc dev 0 2;
|
||||
mmc write ${ramdisk_addr_r} 0 ${boot_block_size};
|
||||
echo Bootloader written successfully;
|
||||
pause 'Press ANY key to reboot device...'; reset;
|
||||
else echo Reading bootloader failed;
|
||||
pause 'Press ANY key to return to bootmenu...'; bootmenu; fi
|
||||
|
||||
update_spi=sf probe 0:1;
|
||||
echo Dumping current SPI flash content ...;
|
||||
sf read ${kernel_addr_r} 0x0 ${spi_size};
|
||||
if fatwrite mmc 1:1 ${kernel_addr_r} spi-flash-backup.bin ${spi_size};
|
||||
then echo SPI flash content was successfully written into spi-flash-backup.bin;
|
||||
echo Reading SPI flash binary;
|
||||
if load mmc 1:1 ${kernel_addr_r} repart-block.bin;
|
||||
then echo Writing bootloader into SPI flash;
|
||||
sf probe 0:1;
|
||||
sf update ${kernel_addr_r} 0x0 ${spi_size};
|
||||
echo Bootloader SUCCESSFULLY written into SPI flash;
|
||||
pause 'Press ANY key to reboot...'; reset;
|
||||
else echo Preparing RAM;
|
||||
mw ${kernel_addr_r} 0 ${boot_block_size_r};
|
||||
mw ${ramdisk_addr_r} 0 ${boot_block_size_r};
|
||||
echo Reading BCT;
|
||||
sf read ${kernel_addr_r} 0x0 ${boot_block_size_r};
|
||||
echo Reading bootloader;
|
||||
if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};
|
||||
then echo Calculating bootloader size;
|
||||
size mmc 1:1 ${bootloader_file};
|
||||
ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};
|
||||
echo Writing bootloader into SPI flash;
|
||||
sf probe 0:1;
|
||||
sf update ${kernel_addr_r} 0x0 ${boot_block_size_r};
|
||||
sf update ${ramdisk_addr_r} ${boot_block_size_r} ${boot_block_size_r};
|
||||
echo Bootloader written SUCCESSFULLY;
|
||||
pause 'Press ANY key to reboot...'; reset;
|
||||
else echo Reading bootloader failed;
|
||||
pause 'Press ANY key to reboot...'; reset; fi;
|
||||
fi;
|
||||
else echo SPI flash backup FAILED! Aborting ...;
|
||||
pause 'Press ANY key to reboot...'; reset; fi
|
||||
Reference in New Issue
Block a user