From 93297f1f9bb5e21149fc344aaddf7cf2b7e1fb8f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 6 Aug 2025 21:23:54 +0200 Subject: [PATCH 1/8] pci: pcie-rcar-gen4: Fix PHY initialization R-Car V4H Reference Manual R19UH0186EJ0130 Rev.1.30 Apr. 21, 2025 page 4581 Figure 104.3b Initial Setting of PCIEC(example) middle of the figure indicates that fourth write into register 0x148 [2:0] is 0x3 or GENMASK(1, 0). The current code writes GENMASK(11, 0) which is a typo. Fix the typo. Fixes: be3dd0dc2fd9 ("pci: pcie-rcar-gen4: Add Renesas R-Car Gen4 DW PCIe controller driver") Signed-off-by: Marek Vasut --- drivers/pci/pci-rcar-gen4.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/pci-rcar-gen4.c b/drivers/pci/pci-rcar-gen4.c index 87cd69f989d..41f0d958447 100644 --- a/drivers/pci/pci-rcar-gen4.c +++ b/drivers/pci/pci-rcar-gen4.c @@ -235,7 +235,7 @@ static int rcar_gen4_pcie_ltssm_control(struct rcar_gen4_pcie *rcar, bool enable clrsetbits_le32(rcar->phy_base + 0x148, GENMASK(23, 22), BIT(22)); clrsetbits_le32(rcar->phy_base + 0x148, GENMASK(18, 16), GENMASK(17, 16)); clrsetbits_le32(rcar->phy_base + 0x148, GENMASK(7, 6), BIT(6)); - clrsetbits_le32(rcar->phy_base + 0x148, GENMASK(2, 0), GENMASK(11, 0)); + clrsetbits_le32(rcar->phy_base + 0x148, GENMASK(2, 0), GENMASK(1, 0)); clrsetbits_le32(rcar->phy_base + 0x1d4, GENMASK(16, 15), GENMASK(16, 15)); clrsetbits_le32(rcar->phy_base + 0x514, BIT(26), BIT(26)); clrsetbits_le32(rcar->phy_base + 0x0f8, BIT(16), 0); From e394ef09bc7389089b410e81fb660ad6ce18223a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 6 Aug 2025 02:56:15 +0200 Subject: [PATCH 2/8] arm64: renesas: r8a779g3: Disable MicroSD UHS modes on Retronix R-Car V4H Sparrow Hawk EVTA1 The Retronix R-Car V4H Sparrow Hawk old revision EVTA1 does not have MicroSD voltage switch populated on the board, therefore the board supports only 3V3 and non-UHS MicroSD cards. While the EVTB1 board is populated with Winbond W77Q51NW SPI NOR, the EVTA1 board is populated with Spansion S25FS512S SPI NOR, those those SPI NOR IDs to discern the two board revisions and apply the MicroSD related DT changes. The MicroSD related DT changes modify the regulator node, which is now a regulator-fixed and supplies only 3V3, and remove sd-uhs-sdr50 and sd-uhs-sdr104 properties from the MicroSD slot controller node. The MicroSD related DT changes cannot be applied as DTO, because the base DT contains nodes which have to be removed in case of EVTA1, but have to be present in case of EVTB1 and newer revisions of the board. Because the EVTA1 is an old revision of the board that is not generally available, it is better to special case it and keep the base DT compatible with EVTB1 and newer revisions of the board which are actually available. Signed-off-by: Marek Vasut --- board/renesas/sparrowhawk/sparrowhawk.c | 114 ++++++++++++++++++++++++ 1 file changed, 114 insertions(+) diff --git a/board/renesas/sparrowhawk/sparrowhawk.c b/board/renesas/sparrowhawk/sparrowhawk.c index 8e72b5424d1..871dad8172a 100644 --- a/board/renesas/sparrowhawk/sparrowhawk.c +++ b/board/renesas/sparrowhawk/sparrowhawk.c @@ -6,8 +6,12 @@ #include #include #include +#include +#include #include +#include "../../../drivers/mtd/spi/sf_internal.h" + #if defined(CONFIG_XPL_BUILD) static const struct renesas_dbsc5_board_config @@ -118,6 +122,116 @@ dbsc5_get_board_data(struct udevice *dev, const u32 modemr0) return &renesas_v4h_sparrowhawk_8g_6400_dbsc5_board_config; } +static bool renesas_v4h_sparrowhawk_is_evta1 = false; + +unsigned int spl_spi_get_uboot_offs(struct spi_flash *flash) +{ + const u8 sf_ids_evta1[6] = { 0x01, 0x02, 0x20, 0x4d, 0x00, 0x81 }; + + renesas_v4h_sparrowhawk_is_evta1 = !memcmp(sf_ids_evta1, flash->info->id, + sizeof(sf_ids_evta1)); + + return CONFIG_SYS_SPI_U_BOOT_OFFS; +} + +void spl_perform_fixups(struct spl_image_info *spl_image) +{ + void *blob = spl_image_fdt_addr(spl_image); + int err, offs; + u32 size; + + if (!renesas_v4h_sparrowhawk_is_evta1) + return; + + printf("EVTA1 board detected\n"); + + /* + * MicroSD voltage switch is not populated on Sparrow Hawk EVTA1, + * rewrite MicroSD slot regulator to only support 3V3 and disable + * UHS modes in MicroSD slot node. + */ + if (!blob) + return; + + err = fdt_check_header(blob); + if (err < 0) { + printf("Invalid FDT header: %s\n", fdt_strerror(err)); + return; + } + + size = fdt_totalsize(blob); + err = fdt_open_into(blob, blob, size + 64); + if (err < 0) { + printf("Failed to expand DT\n"); + return; + } + + offs = fdt_path_offset(blob, "/regulator-vcc-sdhi"); + if (offs < 0) { + printf("Failed to locate MicroSD regulator node: %d\n", offs); + return; + } + + err = fdt_setprop_string(blob, offs, "compatible", "regulator-fixed"); + if (err < 0) { + printf("Failed to set fixed MicroSD regulator: %d\n", err); + return; + } + + err = fdt_setprop_u32(blob, offs, "regulator-min-microvolt", 3300000); + if (err < 0) { + printf("Failed to set MicroSD regulator minimum voltage: %d\n", err); + return; + } + + err = fdt_nop_property(blob, offs, "gpios"); + if (err < 0) { + printf("Failed to remove MicroSD regulator gpios: %d\n", err); + return; + } + + err = fdt_nop_property(blob, offs, "gpios-states"); + if (err < 0) { + printf("Failed to remove MicroSD regulator gpio states: %d\n", err); + return; + } + + err = fdt_nop_property(blob, offs, "states"); + if (err < 0) { + printf("Failed to remove MicroSD regulator states: %d\n", err); + return; + } + + offs = fdt_path_offset(blob, "/soc/mmc@ee140000"); + if (offs < 0) { + printf("Failed to locate MicroSD device node: %d\n", offs); + return; + } + + err = fdt_nop_property(blob, offs, "sd-uhs-sdr50"); + if (err < 0) { + printf("Failed to disable SDR50 mode in MicroSD node: %d\n", err); + return; + } + + err = fdt_nop_property(blob, offs, "sd-uhs-sdr104"); + if (err < 0) { + printf("Failed to disable SDR104 mode in MicroSD node: %d\n", err); + return; + } + + err = fdt_setprop_string(blob, offs, "pinctrl-names", "default"); + if (err < 0) { + printf("Failed to set fixed MicroSD pin names: %d\n", err); + return; + } + + err = fdt_nop_property(blob, offs, "pinctrl-1"); + if (err < 0) { + printf("Failed to disable UHS pins in MicroSD node: %d\n", err); + return; + } +} #endif #define RST_MODEMR0 0xe6160000 From 47148dfd8f7a70afa134723da7940f7c80b47329 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 6 Aug 2025 02:57:14 +0200 Subject: [PATCH 3/8] arm64: renesas: r8a779g3: Disable dual-rank DRAM on Retronix R-Car V4H ES2 Sparrow Hawk The R-Car V4H SoC before rev.3.0 can not support dual-rank LPDDR5 DRAM. This affects 16 GiB dual-rank DRAM configuration of Retronix R-Car V4H Sparrow Hawk board. Fall back to 8 GiB single-rank DRAM configuration on such systems instead. Signed-off-by: Marek Vasut --- board/renesas/sparrowhawk/sparrowhawk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/board/renesas/sparrowhawk/sparrowhawk.c b/board/renesas/sparrowhawk/sparrowhawk.c index 871dad8172a..1fd7a63d2fa 100644 --- a/board/renesas/sparrowhawk/sparrowhawk.c +++ b/board/renesas/sparrowhawk/sparrowhawk.c @@ -116,7 +116,7 @@ dbsc5_get_board_data(struct udevice *dev, const u32 modemr0) * Use MD[19] setting to discern 8 GiB and 16 GiB DRAM Sparrow Hawk * board variants from each other automatically. */ - if (modemr0 & BIT(19)) + if ((renesas_get_cpu_rev_integer() >= 3) && (modemr0 & BIT(19))) return &renesas_v4h_sparrowhawk_16g_5500_dbsc5_board_config; else return &renesas_v4h_sparrowhawk_8g_6400_dbsc5_board_config; @@ -244,7 +244,7 @@ void renesas_dram_init_banksize(void) int bank; /* 8 GiB device, do nothing. */ - if (!(modemr0 & BIT(19))) + if (!((renesas_get_cpu_rev_integer() >= 3) && (modemr0 & BIT(19)))) return; /* 16 GiB device, adjust memory map. */ From c818fd0594840266f0986d8beea94bda0fce1d49 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 6 Aug 2025 02:58:30 +0200 Subject: [PATCH 4/8] arm64: renesas: r8a779g3: Enable xHCI USB on Retronix R-Car V4H Sparrow Hawk board Enable support for PCIe based xHCI USB 3.0 driver and USB mass storage support on Retronix R-Car V4H Sparrow Hawk board . Signed-off-by: Marek Vasut --- configs/r8a779g3_sparrowhawk_defconfig | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/configs/r8a779g3_sparrowhawk_defconfig b/configs/r8a779g3_sparrowhawk_defconfig index bb8d110dc0d..9cee4d287ef 100644 --- a/configs/r8a779g3_sparrowhawk_defconfig +++ b/configs/r8a779g3_sparrowhawk_defconfig @@ -25,6 +25,7 @@ CONFIG_GPIO_HOG=y CONFIG_REMOTEPROC_RENESAS_APMU=y CONFIG_BITBANGMII=y CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NVME_PCI=y CONFIG_PCI=y @@ -34,6 +35,14 @@ CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_RENESAS_RAVB=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_USB=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_XHCI_GENERIC=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y +# CONFIG_USB_XHCI_RCAR is not set # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_HAVE_INIT_STACK=y From 74bc80190c48dce43a59cbae1975ccf10f671bc2 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 13 Aug 2025 23:26:27 +0200 Subject: [PATCH 5/8] arm64: dts: renesas: r8a779g3: Invert microSD voltage selector on Retronix R-Car V4H Sparrow Hawk EVTB1 Invert the polarity of microSD voltage selector on Retronix R-Car V4H Sparrow Hawk board. The voltage selector was not populated on prototype EVTA1 boards, and is implemented slightly different on EVTB1 boards. As the EVTA1 boards are from a limited run and generally not available, update the DT to make it compatible with EVTB1 microSD voltage selector. Signed-off-by: Marek Vasut --- arch/arm/dts/r8a779g3-sparrow-hawk-u-boot.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/dts/r8a779g3-sparrow-hawk-u-boot.dtsi b/arch/arm/dts/r8a779g3-sparrow-hawk-u-boot.dtsi index c9f302799f1..c8c24d661ac 100644 --- a/arch/arm/dts/r8a779g3-sparrow-hawk-u-boot.dtsi +++ b/arch/arm/dts/r8a779g3-sparrow-hawk-u-boot.dtsi @@ -48,3 +48,7 @@ spi-rx-bus-width = <1>; }; }; + +&vcc_sdhi { + states = <1800000 0>, <3300000 1>; +}; From 1df2880e9512f4760f615668e5d06aa5f44b778a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 13 Aug 2025 23:26:59 +0200 Subject: [PATCH 6/8] arm64: dts: renesas: r8a779g3: Set VDDQ18_25_AVB voltage on Retronix R-Car V4H Sparrow Hawk EVTB1 The Retronix R-Car V4H Sparrow Hawk EVTB1 uses 1V8 IO voltage supply for VDDQ18_25_AVB power rail. Update the AVB0 pinmux to reflect the change in IO voltage. Since the VDDQ18_25_AVB power rail is shared, all four AVB0, AVB1, AVB2, TSN0 PFC/GPIO POC[7..4] registers have to be configured the same way. Correct the voltage for EVTA1 boards accordingly by patching the U-Boot control DT in SPL. Signed-off-by: Marek Vasut --- arch/arm/dts/r8a779g3-sparrow-hawk-u-boot.dtsi | 7 +++++++ board/renesas/sparrowhawk/sparrowhawk.c | 12 ++++++++++++ 2 files changed, 19 insertions(+) diff --git a/arch/arm/dts/r8a779g3-sparrow-hawk-u-boot.dtsi b/arch/arm/dts/r8a779g3-sparrow-hawk-u-boot.dtsi index c8c24d661ac..cdf5c9cdd64 100644 --- a/arch/arm/dts/r8a779g3-sparrow-hawk-u-boot.dtsi +++ b/arch/arm/dts/r8a779g3-sparrow-hawk-u-boot.dtsi @@ -7,6 +7,13 @@ #include "r8a779g0-u-boot.dtsi" +&avb0_pins { + pins-vddq18-25-avb { + pins = "PIN_VDDQ_AVB0", "PIN_VDDQ_AVB1", "PIN_VDDQ_AVB2", "PIN_VDDQ_TSN0"; + power-source = <1800>; + }; +}; + /* Page 31 / FAN */ &gpio1 { pwm-fan-hog { diff --git a/board/renesas/sparrowhawk/sparrowhawk.c b/board/renesas/sparrowhawk/sparrowhawk.c index 1fd7a63d2fa..58de7f25cbd 100644 --- a/board/renesas/sparrowhawk/sparrowhawk.c +++ b/board/renesas/sparrowhawk/sparrowhawk.c @@ -231,6 +231,18 @@ void spl_perform_fixups(struct spl_image_info *spl_image) printf("Failed to disable UHS pins in MicroSD node: %d\n", err); return; } + + offs = fdt_path_offset(blob, "/soc/pinctrl@e6050000/avb0/pins-vddq18-25-avb"); + if (offs < 0) { + printf("Failed to locate AVB pinctrl node: %d\n", offs); + return; + } + + err = fdt_setprop_u32(blob, offs, "power-source", 2500); + if (err < 0) { + printf("Failed to set AVB IO voltage: %d\n", err); + return; + } } #endif From 797255d897d635799fbb878262b7491e07ceac9e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 13 Aug 2025 23:25:56 +0200 Subject: [PATCH 7/8] arm64: dts: renesas: r8a779g3: Describe generic SPI NOR support on Retronix R-Car V4H Sparrow Hawk board Retronix R-Car V4H Sparrow Hawk EVTA1 is populated with Spansion S25FS512S, EVTB1 is populated with Winbond W77Q51NW. Describe the SPI NOR using generic "jedec,spi-nor" compatible, because both flashes can be auto-detected based on their built-in IDs. Signed-off-by: Marek Vasut --- arch/arm/dts/r8a779g3-sparrow-hawk-u-boot.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/dts/r8a779g3-sparrow-hawk-u-boot.dtsi b/arch/arm/dts/r8a779g3-sparrow-hawk-u-boot.dtsi index cdf5c9cdd64..dff0355150d 100644 --- a/arch/arm/dts/r8a779g3-sparrow-hawk-u-boot.dtsi +++ b/arch/arm/dts/r8a779g3-sparrow-hawk-u-boot.dtsi @@ -51,6 +51,11 @@ &rpc { flash@0 { + /* + * EVTA1 is populated with Spansion S25FS512S + * EVTB1 is populated with Winbond W77Q51NW + */ + compatible = "jedec,spi-nor"; spi-tx-bus-width = <1>; spi-rx-bus-width = <1>; }; From c797d8bac9921208253242251b855e97107fba22 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 23 Jul 2025 09:10:15 +0100 Subject: [PATCH 8/8] configs: Remove redundant CONFIG_TEXT_BASE assignments for Renesas defconfigs The Renesas board defconfigs explicitly set CONFIG_TEXT_BASE=0x50000000, however U-Boot's POSITION_INDEPENDENT=y build default already places text at 0x0. These hardcoded overrides are therefore unnecessary and will be pruned automatically in upcoming resyncs. Remove the CONFIG_TEXT_BASE lines from the following defconfigs: - hihope_rzg2_defconfig - r8a77970_eagle_defconfig - r8a77970_v3msk_defconfig - r8a77990_ebisu_defconfig - r8a77995_draak_defconfig - r8a779a0_falcon_defconfig - renesas_rzg2l_smarc_defconfig - rz2_beacon_defconfig - silinux_ek874_defconfig Signed-off-by: Lad Prabhakar Reviewed-by: Tom Rini Reviewed-by: Marek Vasut --- configs/hihope_rzg2_defconfig | 1 - configs/r8a77970_eagle_defconfig | 1 - configs/r8a77970_v3msk_defconfig | 1 - configs/r8a77990_ebisu_defconfig | 1 - configs/r8a77995_draak_defconfig | 1 - configs/r8a779a0_falcon_defconfig | 1 - configs/renesas_rzg2l_smarc_defconfig | 1 - configs/rzg2_beacon_defconfig | 1 - configs/silinux_ek874_defconfig | 1 - 9 files changed, 9 deletions(-) diff --git a/configs/hihope_rzg2_defconfig b/configs/hihope_rzg2_defconfig index f5bb28cb0c7..19fb14887c6 100644 --- a/configs/hihope_rzg2_defconfig +++ b/configs/hihope_rzg2_defconfig @@ -5,7 +5,6 @@ CONFIG_ARCH_RENESAS=y CONFIG_RCAR_GEN3=y CONFIG_COUNTER_FREQUENCY=16666666 CONFIG_ARCH_CPU_INIT=y -CONFIG_TEXT_BASE=0x50000000 CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0xFFFE0000 CONFIG_DEFAULT_DEVICE_TREE="renesas/r8a774a1-hihope-rzg2m-ex" diff --git a/configs/r8a77970_eagle_defconfig b/configs/r8a77970_eagle_defconfig index 4ab362f0d43..3734836fa61 100644 --- a/configs/r8a77970_eagle_defconfig +++ b/configs/r8a77970_eagle_defconfig @@ -5,7 +5,6 @@ CONFIG_ARCH_RENESAS=y CONFIG_RCAR_GEN3=y CONFIG_COUNTER_FREQUENCY=16666666 CONFIG_ARCH_CPU_INIT=y -CONFIG_TEXT_BASE=0x50000000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ENV_SIZE=0x40000 CONFIG_ENV_OFFSET=0x700000 diff --git a/configs/r8a77970_v3msk_defconfig b/configs/r8a77970_v3msk_defconfig index 5ef81682caa..d3df0fd0baf 100644 --- a/configs/r8a77970_v3msk_defconfig +++ b/configs/r8a77970_v3msk_defconfig @@ -5,7 +5,6 @@ CONFIG_ARCH_RENESAS=y CONFIG_RCAR_GEN3=y CONFIG_COUNTER_FREQUENCY=16666666 CONFIG_ARCH_CPU_INIT=y -CONFIG_TEXT_BASE=0x50000000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ENV_SIZE=0x40000 CONFIG_ENV_OFFSET=0x700000 diff --git a/configs/r8a77990_ebisu_defconfig b/configs/r8a77990_ebisu_defconfig index 414bfdebab1..7405f207612 100644 --- a/configs/r8a77990_ebisu_defconfig +++ b/configs/r8a77990_ebisu_defconfig @@ -5,7 +5,6 @@ CONFIG_ARCH_RENESAS=y CONFIG_RCAR_GEN3=y CONFIG_COUNTER_FREQUENCY=16666666 CONFIG_ARCH_CPU_INIT=y -CONFIG_TEXT_BASE=0x50000000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0xFFFE0000 diff --git a/configs/r8a77995_draak_defconfig b/configs/r8a77995_draak_defconfig index 12d92067de5..2d487722677 100644 --- a/configs/r8a77995_draak_defconfig +++ b/configs/r8a77995_draak_defconfig @@ -5,7 +5,6 @@ CONFIG_ARCH_RENESAS=y CONFIG_RCAR_GEN3=y CONFIG_COUNTER_FREQUENCY=16666666 CONFIG_ARCH_CPU_INIT=y -CONFIG_TEXT_BASE=0x50000000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0xFFFE0000 diff --git a/configs/r8a779a0_falcon_defconfig b/configs/r8a779a0_falcon_defconfig index f4f5c57451f..1b99ba1f02b 100644 --- a/configs/r8a779a0_falcon_defconfig +++ b/configs/r8a779a0_falcon_defconfig @@ -4,7 +4,6 @@ CONFIG_ARM=y CONFIG_ARCH_RENESAS=y CONFIG_RCAR_GEN4=y CONFIG_COUNTER_FREQUENCY=16666666 -CONFIG_TEXT_BASE=0x50000000 CONFIG_ENV_SIZE=0x40000 CONFIG_ENV_OFFSET=0xC00000 CONFIG_ENV_SECT_SIZE=0x40000 diff --git a/configs/renesas_rzg2l_smarc_defconfig b/configs/renesas_rzg2l_smarc_defconfig index c2bdc521018..401e237a816 100644 --- a/configs/renesas_rzg2l_smarc_defconfig +++ b/configs/renesas_rzg2l_smarc_defconfig @@ -3,7 +3,6 @@ CONFIG_COUNTER_FREQUENCY=16666666 CONFIG_SYS_INIT_SP_BSS_OFFSET=1048576 CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_RENESAS=y -CONFIG_TEXT_BASE=0x50000000 CONFIG_SYS_MALLOC_LEN=0x4000000 CONFIG_SYS_MALLOC_F_LEN=0x80000 CONFIG_ENV_SIZE=0x20000 diff --git a/configs/rzg2_beacon_defconfig b/configs/rzg2_beacon_defconfig index 0b91337b17b..d3f7061f04d 100644 --- a/configs/rzg2_beacon_defconfig +++ b/configs/rzg2_beacon_defconfig @@ -3,7 +3,6 @@ CONFIG_ARM=y CONFIG_ARCH_RENESAS=y CONFIG_RCAR_GEN3=y -CONFIG_TEXT_BASE=0x50000000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0xFFFFE000 diff --git a/configs/silinux_ek874_defconfig b/configs/silinux_ek874_defconfig index acdd1ad5205..af462d2086f 100644 --- a/configs/silinux_ek874_defconfig +++ b/configs/silinux_ek874_defconfig @@ -5,7 +5,6 @@ CONFIG_ARCH_RENESAS=y CONFIG_RCAR_GEN3=y CONFIG_COUNTER_FREQUENCY=16666666 CONFIG_ARCH_CPU_INIT=y -CONFIG_TEXT_BASE=0x50000000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x3F0000