Merge patch series "env: migrate static flags list to Kconfig"

This series from James Hilliard <james.hilliard1@gmail.com> converts the
static flags list for the environment to be configured via Kconfig and
updates the documentation.

Link: https://lore.kernel.org/r/20260511182036.50453-1-james.hilliard1@gmail.com

include/configs/aristainetos2.h

@@ -413,7 +413,4 @@
 
 /* UBI support */
 
-#define CFG_ENV_FLAGS_LIST_STATIC "ethaddr:mw,serial#:sw,board_type:sw," \
-		"sysnum:dw,panel:sw,ipaddr:iw,serverip:iw"
-
 #endif                         /* __ARISTAINETOS2_CONFIG_H */

include/configs/capricorn-common.h

@@ -38,19 +38,6 @@
 #define CFG_EXTRA_ENV_SETTINGS \
 	AHAB_ENV
 
-#ifdef CONFIG_ENV_WRITEABLE_LIST
-#define CFG_ENV_FLAGS_LIST_STATIC \
-	"bootcount:dw," \
-	"bootdelay:sw," \
-	"bootlimit:dw," \
-	"partitionset_active:sw," \
-	"rastate:dw," \
-	"sig_a:sw,sig_b:sw," \
-	"target_env:sw," \
-	"upgrade_available:dw," \
-	"ustate:dw"
-#endif
-
 /* Default location for tftp and bootm */
 
 /* On CCP board, USDHC1 is for eMMC */

include/configs/hmibsc.h

@@ -8,8 +8,4 @@
 #ifndef __CONFIGS_HMIBSC_H
 #define __CONFIGS_HMIBSC_H
 
-/* PHY needs a longer aneg time */
-
-#define CFG_ENV_FLAGS_LIST_STATIC "BOOT_A_LEFT:dw,BOOT_B_LEFT:dw,BOOT_ORDER:sw"
-
 #endif

include/configs/imx6q-bosch-acc.h

@@ -44,18 +44,6 @@
 		"then env set env_persisted 1; run save_env; fi;\0" \
 	"save_env=env save; env save\0"
 
-#define CFG_ENV_FLAGS_LIST_STATIC \
-	"bootset:bw," \
-	"clone_pending:bw," \
-	"endurance_test:bw," \
-	"env_persisted:bw," \
-	"factory_reset:bw," \
-	"fdtcontroladdr:xw," \
-	"fitpart:dw," \
-	"mmcpart:dw," \
-	"production:bw," \
-	"ustate:dw"
-
 #else
 /* SD Card boot */
 #define ENV_EXTRA \

include/configs/iot2050.h

@@ -38,12 +38,4 @@
        func(MMC, mmc, 0) \
        BOOT_TARGET_USB(func)
 
-#ifdef CONFIG_ENV_WRITEABLE_LIST
-#define CFG_ENV_FLAGS_LIST_STATIC					\
-	"board_uuid:sw,board_name:sw,board_serial:sw,board_a5e:sw,"	\
-	"mlfb:sw,fw_version:sw,seboot_version:sw,"			\
-	"m2_manual_config:sw,"						\
-	"eth1addr:mw,eth2addr:mw,watchdog_timeout_ms:dw,boot_targets:sw"
-#endif
-
 #endif /* __CONFIG_IOT2050_H */

include/configs/smegw01.h

@@ -22,21 +22,6 @@
 #define EXTRA_BOOTPARAMS
 #endif
 
-#ifdef CONFIG_SYS_BOOT_LOCKED
-#define EXTRA_ENV_FLAGS
-#else
-#define EXTRA_ENV_FLAGS "mmcdev:dw,"
-#endif
-
-#define CFG_ENV_FLAGS_LIST_STATIC \
-	"mmcpart:dw," \
-	"mmcpart_committed:dw," \
-	"ustate:dw," \
-	"bootcount:dw," \
-	"bootlimit:dw," \
-	"upgrade_available:dw," \
-	EXTRA_ENV_FLAGS
-
 /* Physical Memory Map */
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 

include/configs/socrates.h

@@ -108,8 +108,6 @@
  */
 #define CFG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/
 
-#define CFG_ENV_FLAGS_LIST_STATIC "ethaddr:mw,eth1addr:mw,system1_addr:xw,serial#:sw,ethact:sw,ethprime:sw"
-
 /* pass open firmware flat tree */
 
 #endif	/* __CONFIG_H */

include/env_flags.h

@@ -37,10 +37,6 @@ enum env_flags_varaccess {
 #define ENV_FLAGS_VARTYPE_LOC 0
 #define ENV_FLAGS_VARACCESS_LOC 1
 
-#ifndef CFG_ENV_FLAGS_LIST_STATIC
-#define CFG_ENV_FLAGS_LIST_STATIC ""
-#endif
-
 #if CONFIG_IS_ENABLED(NET)
 #ifdef CONFIG_REGEX
 #define ETHADDR_WILDCARD "\\d*"
@@ -89,7 +85,7 @@ enum env_flags_varaccess {
 	NET_FLAGS \
 	NET6_FLAGS \
 	SERIAL_FLAGS \
-	CFG_ENV_FLAGS_LIST_STATIC
+	CONFIG_ENV_FLAGS_LIST_STATIC
 
 #ifdef CONFIG_CMD_ENV_FLAGS
 /*