diff --git a/arch/arm/dts/ipq5424-rdp466-u-boot.dtsi b/arch/arm/dts/ipq5424-rdp466-u-boot.dtsi
index 9e4af4d9f72..36640f31d61 100644
--- a/arch/arm/dts/ipq5424-rdp466-u-boot.dtsi
+++ b/arch/arm/dts/ipq5424-rdp466-u-boot.dtsi
@@ -12,6 +12,9 @@
 		reg = <0x0 0x80000000 0x0 0x20000000>;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 	&sdhc {
diff --git a/arch/arm/dts/lemans-evk-u-boot.dtsi b/arch/arm/dts/lemans-evk-u-boot.dtsi
new file mode 100644
index 00000000000..cdd3d32f61a
--- /dev/null
+++ b/arch/arm/dts/lemans-evk-u-boot.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2026, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/ {
+	/* Will be removed when bootloader updates later */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x3ee00000>,
+		      <0x0 0xc0000000 0x0 0x0fd00000>,
+		      <0xD 0x00000000 0x2 0x54100000>,
+		      <0xA 0x80000000 0x1 0x80000000>,
+		      <0x9 0x00000000 0x1 0x80000000>,
+		      <0x1 0x00000000 0x3 0x00000000>,
+		      <0x0 0xd0000000 0x0 0x01900000>,
+		      <0x0 0xd3500000 0x0 0x2cb00000>;
+	};
+};
diff --git a/board/qualcomm/dragonboard410c/configs/chainloaded.config b/board/qualcomm/dragonboard410c/configs/chainloaded.config
index 3fd064924a1..cf334d7ee20 100644
--- a/board/qualcomm/dragonboard410c/configs/chainloaded.config
+++ b/board/qualcomm/dragonboard410c/configs/chainloaded.config
@@ -4,4 +4,4 @@ CONFIG_TEXT_BASE=0x0
 # CONFIG_REMAKE_ELF is not set
 CONFIG_POSITION_INDEPENDENT=y
 CONFIG_INIT_SP_RELATIVE=y
-CONFIG_SYS_INIT_SP_BSS_OFFSET=524288
+CONFIG_SYS_INIT_SP_BSS_OFFSET=0x80000
diff --git a/board/qualcomm/qcom-phone.env b/board/qualcomm/qcom-phone.env
index e91ae3ecdfb..d1c586bd3fb 100644
--- a/board/qualcomm/qcom-phone.env
+++ b/board/qualcomm/qcom-phone.env
@@ -39,7 +39,7 @@ bootmenu_5=Reset device=reset
 bootmenu_6=Dump clocks=clk dump; pause
 bootmenu_7=Dump environment=printenv; pause
 bootmenu_8=Board info=bdinfo; pause
-bootmenu_9=Dump bootargs=fdt print /chosen bootargs; pause
+bootmenu_9=Dump bootargs=fdt addr $fdt_addr_r; fdt print /chosen bootargs; pause
 
 # Allow holding the volume down button while U-Boot loads to enter
 # the boot menu
diff --git a/configs/qcom_qcs615_defconfig b/configs/qcom_qcs615_defconfig
index 27666a8129d..e060fac3726 100644
--- a/configs/qcom_qcs615_defconfig
+++ b/configs/qcom_qcs615_defconfig
@@ -22,3 +22,5 @@ CONFIG_REMAKE_ELF=y
 CONFIG_TEXT_BASE=0x9fc00000
 
 CONFIG_FASTBOOT_BUF_ADDR=0xa1600000
+
+CONFIG_WATCHDOG_AUTOSTART=y
diff --git a/configs/qcom_qcs9100_defconfig b/configs/qcom_qcs9100_defconfig
index 082106157bb..efd6c63f212 100644
--- a/configs/qcom_qcs9100_defconfig
+++ b/configs/qcom_qcs9100_defconfig
@@ -14,3 +14,5 @@ CONFIG_ENV_IS_IN_SCSI=y
 CONFIG_ENV_SCSI_PART_UUID="71cb9cd0-acf1-b6cb-ad91-be9572fe11a9"
 # CONFIG_ENV_IS_DEFAULT is not set
 # CONFIG_ENV_IS_NOWHERE is not set
+
+CONFIG_WATCHDOG_AUTOSTART=y
diff --git a/drivers/gpio/qcom_pmic_gpio.c b/drivers/gpio/qcom_pmic_gpio.c
index 4458c55cd3d..6215f794e09 100644
--- a/drivers/gpio/qcom_pmic_gpio.c
+++ b/drivers/gpio/qcom_pmic_gpio.c
@@ -344,7 +344,6 @@ static int qcom_gpio_probe(struct udevice *dev)
 static const struct udevice_id qcom_gpio_ids[] = {
 	{ .compatible = "qcom,pm8916-gpio" },
 	{ .compatible = "qcom,pm8994-gpio" },	/* 22 GPIO's */
-	{ .compatible = "qcom,pm8998-gpio" },
 	{ .compatible = "qcom,pms405-gpio" },
 	{ .compatible = "qcom,pm6125-gpio" },
 	{ .compatible = "qcom,pm8150-gpio" },
diff --git a/drivers/gpio/qcom_spmi_gpio.c b/drivers/gpio/qcom_spmi_gpio.c
index 77a69140213..fc1aac8b534 100644
--- a/drivers/gpio/qcom_spmi_gpio.c
+++ b/drivers/gpio/qcom_spmi_gpio.c
@@ -752,6 +752,7 @@ static const struct udevice_id qcom_spmi_pmic_gpio_ids[] = {
 	{ .compatible = "qcom,pm8550b-gpio" },
 	{ .compatible = "qcom,pm8550ve-gpio" },
 	{ .compatible = "qcom,pm8550vs-gpio" },
+	{ .compatible = "qcom,pm8998-gpio" },
 	{ .compatible = "qcom,pmk8550-gpio" },
 	{ .compatible = "qcom,pmr735d-gpio" },
 	{ }
diff --git a/drivers/power/regulator/qcom-rpmh-regulator.c b/drivers/power/regulator/qcom-rpmh-regulator.c
index 4d65aae1690..f789b5b6f86 100644
--- a/drivers/power/regulator/qcom-rpmh-regulator.c
+++ b/drivers/power/regulator/qcom-rpmh-regulator.c
@@ -295,57 +295,6 @@ static int rpmh_regulator_vrm_get_value(struct udevice *rdev)
 	return vreg->uv;
 }
 
-static int rpmh_regulator_is_enabled(struct udevice *rdev)
-{
-	struct rpmh_vreg *vreg = dev_get_priv(rdev);
-	int ret;
-
-	debug("%s: is_enabled %d\n", rdev->name, vreg->enabled);
-
-	if (vreg->enabled < 0) {
-		struct tcs_cmd cmd = {
-			.addr = vreg->addr + RPMH_REGULATOR_REG_ENABLE,
-		};
-		ret = rpmh_regulator_read_data(vreg, &cmd);
-		/*
-		 * Don't override if disabled since we will also vote the right voltage
-		 * while enabling
-		 */
-		if (!ret && cmd.data)
-			vreg->enabled = cmd.data & RPMH_REGULATOR_ENABLE_MASK;
-	}
-
-	return vreg->enabled > 0;
-}
-
-static int rpmh_regulator_set_enable_state(struct udevice *rdev,
-					   bool enable)
-{
-	struct rpmh_vreg *vreg = dev_get_priv(rdev);
-	struct tcs_cmd cmd = {
-		.addr = vreg->addr + RPMH_REGULATOR_REG_ENABLE,
-		.data = enable,
-	};
-	int ret;
-
-	debug("%s: set_enable %d (current %d)\n", rdev->name, enable,
-	      vreg->enabled);
-
-	if (vreg->enabled == -EINVAL &&
-	    vreg->uv != -ENOTRECOVERABLE) {
-		ret = _rpmh_regulator_vrm_set_value(rdev,
-						    vreg->uv, true);
-		if (ret < 0)
-			return ret;
-	}
-
-	ret = rpmh_regulator_send_request(vreg, &cmd, enable);
-	if (!ret)
-		vreg->enabled = enable;
-
-	return ret;
-}
-
 static int rpmh_regulator_vrm_set_mode_bypass(struct rpmh_vreg *vreg,
 					      unsigned int mode, bool bypassed)
 {
@@ -396,6 +345,63 @@ static int rpmh_regulator_vrm_set_mode(struct udevice *rdev,
 	return ret;
 }
 
+static int rpmh_regulator_is_enabled(struct udevice *rdev)
+{
+	struct rpmh_vreg *vreg = dev_get_priv(rdev);
+	int ret;
+
+	debug("%s: is_enabled %d\n", rdev->name, vreg->enabled);
+
+	if (vreg->enabled < 0) {
+		struct tcs_cmd cmd = {
+			.addr = vreg->addr + RPMH_REGULATOR_REG_ENABLE,
+		};
+		ret = rpmh_regulator_read_data(vreg, &cmd);
+		/*
+		 * Don't override if disabled since we will also vote the right voltage
+		 * while enabling
+		 */
+		if (!ret && cmd.data)
+			vreg->enabled = cmd.data & RPMH_REGULATOR_ENABLE_MASK;
+	}
+
+	return vreg->enabled > 0;
+}
+
+static int rpmh_regulator_set_enable_state(struct udevice *rdev,
+					   bool enable)
+{
+	struct rpmh_vreg *vreg = dev_get_priv(rdev);
+	struct tcs_cmd cmd = {
+		.addr = vreg->addr + RPMH_REGULATOR_REG_ENABLE,
+		.data = enable,
+	};
+	int ret;
+
+	debug("%s: set_enable %d (current %d)\n", rdev->name, enable,
+	      vreg->enabled);
+
+	if (vreg->mode != -EINVAL) {
+		ret = rpmh_regulator_vrm_set_mode_bypass(vreg, vreg->mode, vreg->bypassed);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (vreg->enabled == -EINVAL &&
+	    vreg->uv != -ENOTRECOVERABLE) {
+		ret = _rpmh_regulator_vrm_set_value(rdev,
+						    vreg->uv, true);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = rpmh_regulator_send_request(vreg, &cmd, enable);
+	if (!ret)
+		vreg->enabled = enable;
+
+	return ret;
+}
+
 static int rpmh_regulator_vrm_get_pmic_mode(struct rpmh_vreg *vreg, int *pmic_mode)
 {
 	struct tcs_cmd cmd = {