Convert CONFIG_SPL_NAND_SUPPORT to Kconfig

Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2026-06-13 15:03:58 +03:00 · 2016-09-12 23:18:48 -06:00
parent 2fa0850877
commit d6b9bd8923
165 changed files with 127 additions and 64 deletions
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -31,7 +31,6 @@
 #define CONFIG_SPL_MAX_SIZE		0x28000
 #define RESET_VECTOR_OFFSET		0x27FFC
 #define BOOT_PAGE_OFFSET		0x27000
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(768 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -29,7 +29,6 @@
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -45,7 +45,6 @@
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -30,7 +30,6 @@
 #define CONFIG_SPL_NAND_INIT
 #define CONFIG_TPL_SERIAL_SUPPORT
 #define CONFIG_TPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_TPL_NAND_SUPPORT
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SPL_MAX_SIZE		(128 << 10)
 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
@@ -42,7 +41,6 @@
 #elif defined(CONFIG_SPL_BUILD)
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TEXT_BASE		0xff800000
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -23,7 +23,6 @@
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -74,7 +74,6 @@
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
@@ -95,7 +94,6 @@
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_NAND_INIT
 #define CONFIG_TPL_SERIAL_SUPPORT
-#define CONFIG_TPL_NAND_SUPPORT
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SPL_MAX_SIZE		(128 << 10)
 #define CONFIG_SPL_TEXT_BASE		0xD0001000
@@ -107,7 +105,6 @@
 #elif defined(CONFIG_SPL_BUILD)
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TEXT_BASE		0xff800000
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -69,7 +69,6 @@
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_NAND_INIT
 #define CONFIG_TPL_SERIAL_SUPPORT
-#define CONFIG_TPL_NAND_SUPPORT
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SPL_MAX_SIZE		(128 << 10)
 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
@@ -81,7 +80,6 @@
 #elif defined(CONFIG_SPL_BUILD)
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TEXT_BASE		0xff800000
 #define CONFIG_SPL_MAX_SIZE		4096
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -61,7 +61,6 @@
 #endif

 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(768 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -68,7 +68,6 @@
 #endif

 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(768 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_START	0x30000000
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -61,7 +61,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define BOOT_PAGE_OFFSET		0x27000

 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_SUPPORT
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_U_BOOT_HDR_SIZE		(16 << 10)
 /*
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -71,7 +71,6 @@
 #endif

 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(768 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -60,7 +60,6 @@
 #endif

 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(768 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
--- a/include/configs/T4240QDS.h
+++ b/include/configs/T4240QDS.h
@@ -37,7 +37,6 @@
 #define BOOT_PAGE_OFFSET		0x27000

 #ifdef	CONFIG_NAND
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(768 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -326,7 +326,6 @@
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
 /* Remove other SPL modes. */
 #undef CONFIG_SPL_YMODEM_SUPPORT
-#undef CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_ENV_IS_NOWHERE
 #undef CONFIG_ENV_IS_IN_NAND
 /* disable host part of MUSB in SPL */
--- a/include/configs/am335x_sl50.h
+++ b/include/configs/am335x_sl50.h
@@ -99,7 +99,6 @@
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
 /* Remove other SPL modes. */
 #undef CONFIG_SPL_YMODEM_SUPPORT
-#undef CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_ENV_IS_NOWHERE
 #undef CONFIG_ENV_IS_IN_NAND
 /* disable host part of MUSB in SPL */
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -288,7 +288,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"

 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -345,7 +345,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"

 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/apf27.h
+++ b/include/configs/apf27.h
@@ -41,7 +41,6 @@
 #define CONFIG_SPL_SERIAL_SUPPORT

 /* NAND boot config */
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x800
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -204,7 +204,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"

 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -248,7 +248,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"

 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -248,7 +248,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"

 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -88,7 +88,6 @@

 #ifdef CONFIG_NAND
 #define CONFIG_SPL_NAND_AM33XX_BCH	/* OMAP4 and later ELM support */
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -307,7 +307,6 @@

 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -91,7 +91,6 @@

 #include <configs/ti_armv7_omap.h>
 #undef CONFIG_SPL_OS_BOOT
-#undef CONFIG_SPL_NAND_SUPPORT
 #undef CONFIG_SYS_MONITOR_LEN
 #undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR

--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -163,7 +163,6 @@
 #define CONFIG_SPL_SERIAL_SUPPORT

 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -205,7 +205,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	10
 #define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -200,7 +200,6 @@
 /* SPL loads an image from NAND */
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS

 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -9,7 +9,6 @@

 /* SPL */
 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 /* Location in NAND to read U-Boot from */
 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
--- a/include/configs/ipam390.h
+++ b/include/configs/ipam390.h
@@ -178,7 +178,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	10
 #define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -100,7 +100,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
 #define CONFIG_SPL_WATCHDOG_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT

 #define CONFIG_SPL_TEXT_BASE		0x10000000
 #define CONFIG_SPL_MAX_SIZE		0x1a000
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -86,7 +86,6 @@
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_SPL_WATCHDOG_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_TEXT_BASE		0x10000000
 #define CONFIG_SPL_MAX_SIZE		0x1a000
 #define CONFIG_SPL_STACK		0x1001d000
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -268,7 +268,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_MAX_SIZE		0x16000
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_STACK		(CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
--- a/include/configs/m53evk.h
+++ b/include/configs/m53evk.h
@@ -239,7 +239,6 @@
 #define CONFIG_SPL_TEXT_BASE		0x70008000
 #define CONFIG_SPL_PAD_TO		0x8000
 #define CONFIG_SPL_STACK		0x70004000
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

 #define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -322,7 +322,6 @@

 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -31,7 +31,6 @@
 #define CONFIG_SPL_TARGET	"u-boot-with-spl.bin"
 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
 #define CONFIG_SPL_MAX_SIZE	2048
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

 #define CONFIG_SPL_TEXT_BASE	0x87dc0000
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -76,7 +76,6 @@

 /* NAND SPL */
 #define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -122,7 +122,6 @@
 #define CONFIG_SYS_ONENAND_BLOCK_SIZE	(128*1024)

 /* NAND config */
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_OMAP3_ID_NAND
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -232,7 +232,6 @@
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_NAND_INIT
 #define CONFIG_TPL_SERIAL_SUPPORT
-#define CONFIG_TPL_NAND_SUPPORT
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SPL_MAX_SIZE		(128 << 10)
 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
@@ -244,7 +243,6 @@
 #elif defined(CONFIG_SPL_BUILD)
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_SPL_TEXT_BASE		0xff800000
--- a/include/configs/platinum.h
+++ b/include/configs/platinum.h
@@ -8,7 +8,6 @@
 #define __PLATINUM_CONFIG_H__

 /* SPL */
-#define CONFIG_SPL_NAND_SUPPORT

 /* Location in NAND to read U-Boot from */
 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
--- a/include/configs/sama5d2_ptc.h
+++ b/include/configs/sama5d2_ptc.h
@@ -133,7 +133,6 @@
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000

 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_PMECC_CAP		8
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -137,7 +137,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"

 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -177,7 +177,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"

 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -137,7 +137,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"

 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_PMECC_CAP		8
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -135,7 +135,6 @@
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"

 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_PMECC_CAP		8
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -149,7 +149,6 @@

 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_AM33XX_BCH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -241,7 +241,6 @@

 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL	(2*32 + 14)
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_USE_NANDFLASH	1
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -327,9 +327,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #ifdef CONFIG_DM_SPI
 #define CONFIG_SPL_SPI_SUPPORT
 #endif
-#ifdef CONFIG_SPL_NAND_DENALI
-#define CONFIG_SPL_NAND_SUPPORT
-#endif

 /* SPL SDMMC boot support */
 #ifdef CONFIG_SPL_MMC_SUPPORT
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -134,7 +134,6 @@

 #ifdef CONFIG_NAND_SUNXI
 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
-#define CONFIG_SPL_NAND_SUPPORT 1
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_MAX_NAND_DEVICE 8
 #endif
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -203,7 +203,6 @@

 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -289,7 +289,6 @@

 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -262,7 +262,6 @@

 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL	(2*32 + 14)
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_USE_NANDFLASH	1
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -268,7 +268,6 @@
 #define CONFIG_SPL_BOARD_INIT

 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -321,7 +321,6 @@
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -281,8 +281,6 @@
 #define CONFIG_SPL_NOR_SUPPORT
 #ifdef CONFIG_ARM64
 #define CONFIG_SPL_BOARD_LOAD_IMAGE
-#else
-#define CONFIG_SPL_NAND_SUPPORT
 #endif

 #define CONFIG_SPL_BOARD_INIT
--- a/include/configs/work_92105.h
+++ b/include/configs/work_92105.h
@@ -191,7 +191,6 @@
 /* SPL will use serial */
 #define CONFIG_SPL_SERIAL_SUPPORT
 /* SPL will load U-Boot from NAND offset 0x40000 */
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_BOOT