Mirrors/u-boot
1
0
Fork 0
mirror of https://source.denx.de/u-boot/u-boot.git synced 2026-06-13 15:03:58 +03:00
Code Issues Packages Projects Releases Wiki Activity

mmc: dw_mmc: add voltage switch command flag

Browse Source 
During a voltage switch command (CMD11, opcode: SD_CMD_SWITCH_UHS18V),
certain hosts tend to stop responding to subsequent commands. This is
addressed by introducing an additional command flag,
DWMCI_CMD_VOLT_SWITCH.

The associated interrupt bit is defined as DWMCI_INTMSK_VOLTSW. This is
set high when a voltage switch is issued, this needs to be waited for
and set to low. Implement the same in the timeout loop. Do note that
since DWMCI_INTMSK_VOLTSW shares the same bit as DWMCI_INTMSK_HTO (bit
10), the interrupt bit needs to be polled for only if the volt switch
command is issued.

DWMCI_CMD_VOLT_SWITCH also needs to be set for subsequent clken commands
after the volt switch. To ensure this, add a boolean member in the host
private struct (herein named volt_switching), which informs if the last
command issued was for volt switching or not.

Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
This commit is contained in:
Kaustabh Chakraborty
2025-10-17 20:54:09 +05:30
committed by Peng Fan
parent ae46019592
commit e6b66e9f33
2 changed files with 17 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
drivers/mmc/dw_mmc.c
View File

@@ -419,6 +419,10 @@ static int dwmci_send_cmd_common(struct dwmci_host *host, struct mmc_cmd *cmd,
if (cmd->resp_type & MMC_RSP_CRC)
flags |= DWMCI_CMD_CHECK_CRC;
host->volt_switching = (cmd->cmdidx == SD_CMD_SWITCH_UHS18V);
if (host->volt_switching)
flags |= DWMCI_CMD_VOLT_SWITCH;
flags |= cmd->cmdidx | DWMCI_CMD_START | DWMCI_CMD_USE_HOLD_REG;
debug("Sending CMD%d\n", cmd->cmdidx);
@@ -427,6 +431,10 @@ static int dwmci_send_cmd_common(struct dwmci_host *host, struct mmc_cmd *cmd,
for (i = 0; i < retry; i++) {
mask = dwmci_readl(host, DWMCI_RINTSTS);
if (host->volt_switching && (mask & DWMCI_INTMSK_VOLTSW)) {
dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_VOLTSW);
break;
}
if (mask & DWMCI_INTMSK_CDONE) {
if (!data)
dwmci_writel(host, DWMCI_RINTSTS, mask);
@@ -508,12 +516,15 @@ static int dwmci_control_clken(struct dwmci_host *host, bool on)
const u32 val = on ? DWMCI_CLKEN_ENABLE | DWMCI_CLKEN_LOW_PWR : 0;
const u32 cmd_only_clk = DWMCI_CMD_PRV_DAT_WAIT | DWMCI_CMD_UPD_CLK;
int i, timeout = 10000;
u32 mask;
u32 flags, mask;
dwmci_writel(host, DWMCI_CLKENA, val);
/* Inform CIU */
dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_START | cmd_only_clk);
flags = DWMCI_CMD_START | cmd_only_clk;
if (host->volt_switching)
flags |= DWMCI_CMD_VOLT_SWITCH;
dwmci_writel(host, DWMCI_CMD, flags);
for (i = 0; i < timeout; i++) {
mask = dwmci_readl(host, DWMCI_RINTSTS);