mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2026-06-13 15:03:58 +03:00
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
This commit is contained in:
Albert ARIBAUD
@@ -34,7 +34,7 @@
|
||||
|
||||
/* SPL defines. */
|
||||
#define CONFIG_SPL_TEXT_BASE 0x40300350
|
||||
#define CONFIG_SPL_MAX_SIZE (0x40337C00 - CONFIG_SPL_TEXT_BASE)
|
||||
#define CONFIG_SPL_MAX_SIZE (220 << 10) /* 220KB */
|
||||
#define CONFIG_SPL_YMODEM_SUPPORT
|
||||
|
||||
/* Enabling L2 Cache */
|
||||
|
||||
@@ -4,7 +4,7 @@
|
||||
* Lokesh Vutla <lokeshvutla@ti.com>
|
||||
*
|
||||
* Configuration settings for the TI DRA7XX board.
|
||||
* See omap5_common.h for omap5 common settings.
|
||||
* See ti_omap5_common.h for omap5 common settings.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
@@ -34,7 +34,7 @@
|
||||
|
||||
#define CONFIG_SYS_OMAP_ABE_SYSCK
|
||||
|
||||
#include <configs/omap5_common.h>
|
||||
#include <configs/ti_omap5_common.h>
|
||||
|
||||
/* CPSW Ethernet */
|
||||
#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */
|
||||
|
||||
@@ -10,20 +10,13 @@
|
||||
#ifndef __IGEP00X0_H
|
||||
#define __IGEP00X0_H
|
||||
|
||||
#include <asm/sizes.h>
|
||||
#ifdef CONFIG_BOOT_NAND
|
||||
#define CONFIG_NAND
|
||||
#endif
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
*/
|
||||
#define CONFIG_OMAP 1 /* in a TI OMAP core */
|
||||
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
|
||||
#define CONFIG_OMAP_GPIO
|
||||
#define CONFIG_OMAP_COMMON
|
||||
#define CONFIG_NR_DRAM_BANKS 2
|
||||
|
||||
#define CONFIG_SDRC /* The chip has SDRC controller */
|
||||
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/omap3.h>
|
||||
#include <configs/ti_omap3_common.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
/*
|
||||
@@ -32,47 +25,12 @@
|
||||
#define CONFIG_DISPLAY_CPUINFO 1
|
||||
#define CONFIG_DISPLAY_BOARDINFO 1
|
||||
|
||||
/* Clock Defines */
|
||||
#define V_OSCK 26000000 /* Clock output from T2 */
|
||||
#define V_SCLK (V_OSCK >> 1)
|
||||
|
||||
#define CONFIG_MISC_INIT_R
|
||||
|
||||
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 1
|
||||
#define CONFIG_INITRD_TAG 1
|
||||
#define CONFIG_REVISION_TAG 1
|
||||
|
||||
#define CONFIG_OF_LIBFDT
|
||||
#define CONFIG_CMD_BOOTZ
|
||||
#define CONFIG_SUPPORT_RAW_INITRD
|
||||
|
||||
/*
|
||||
* NS16550 Configuration
|
||||
*/
|
||||
|
||||
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
|
||||
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
||||
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
|
||||
|
||||
/* select serial console configuration */
|
||||
#define CONFIG_CONS_INDEX 3
|
||||
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
|
||||
#define CONFIG_SERIAL3 3
|
||||
|
||||
/* allow to overwrite serial and ethaddr */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \
|
||||
115200}
|
||||
#define CONFIG_GENERIC_MMC 1
|
||||
#define CONFIG_MMC 1
|
||||
#define CONFIG_OMAP_HSMMC 1
|
||||
#define CONFIG_DOS_PARTITION 1
|
||||
|
||||
/* define to enable boot progress via leds */
|
||||
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
|
||||
(CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
|
||||
@@ -95,21 +53,10 @@
|
||||
#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
|
||||
#define CONFIG_USBD_PRODUCT_NAME "IGEP"
|
||||
|
||||
/* commands to include */
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_CACHE
|
||||
#define CONFIG_CMD_EXT4
|
||||
#define CONFIG_CMD_FAT /* FAT support */
|
||||
#define CONFIG_CMD_FS_GENERIC
|
||||
#define CONFIG_CMD_I2C /* I2C serial bus support */
|
||||
#define CONFIG_CMD_MMC /* MMC support */
|
||||
#ifdef CONFIG_BOOT_ONENAND
|
||||
#define CONFIG_CMD_ONENAND /* ONENAND support */
|
||||
#endif
|
||||
#ifdef CONFIG_BOOT_NAND
|
||||
#define CONFIG_CMD_NAND
|
||||
#endif
|
||||
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
|
||||
(CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
|
||||
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
|
||||
@@ -117,24 +64,8 @@
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_NFS /* NFS support */
|
||||
#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
|
||||
#define CONFIG_MTD_DEVICE
|
||||
|
||||
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
|
||||
#undef CONFIG_CMD_IMLS /* List all found images */
|
||||
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_OMAP34XX
|
||||
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
|
||||
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
|
||||
|
||||
/*
|
||||
* TWL4030
|
||||
*/
|
||||
#define CONFIG_TWL4030_POWER 1
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
/*#undef CONFIG_ENV_IS_NOWHERE*/
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"usbtty=cdc_acm\0" \
|
||||
@@ -205,48 +136,6 @@
|
||||
"fi;" \
|
||||
"run nandboot;" \
|
||||
|
||||
#define CONFIG_AUTO_COMPLETE 1
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
||||
#define CONFIG_SYS_PROMPT "U-Boot # "
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||||
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */
|
||||
/* works on */
|
||||
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
|
||||
0x01F00000) /* 31MB */
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
|
||||
/* load address */
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
|
||||
|
||||
/*
|
||||
* OMAP3 has 12 GP timers, they can be driven by the system clock
|
||||
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
|
||||
* This rate is divided by a local divisor.
|
||||
*/
|
||||
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
|
||||
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
|
||||
|
||||
/*
|
||||
* Physical Memory Map
|
||||
*
|
||||
*/
|
||||
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
|
||||
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
|
||||
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
|
||||
|
||||
/*
|
||||
* FLASH and environment organization
|
||||
*/
|
||||
@@ -263,23 +152,15 @@
|
||||
#define CONFIG_ENV_ADDR ONENAND_ENV_OFFSET
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_BOOT_NAND
|
||||
#ifdef CONFIG_NAND
|
||||
#define PISMO1_NAND_SIZE GPMC_SIZE_128M /* Configure the PISMO */
|
||||
#define CONFIG_NAND_OMAP_GPMC
|
||||
#define CONFIG_SYS_NAND_BASE NAND_BASE
|
||||
#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
|
||||
#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
|
||||
#define CONFIG_ENV_IS_IN_NAND 1
|
||||
#define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */
|
||||
#define CONFIG_ENV_ADDR NAND_ENV_OFFSET
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
|
||||
|
||||
/*
|
||||
* SMSC911x Ethernet
|
||||
*/
|
||||
@@ -289,54 +170,9 @@
|
||||
#define CONFIG_SMC911X_BASE 0x2C000000
|
||||
#endif /* (CONFIG_CMD_NET) */
|
||||
|
||||
/*
|
||||
* Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader
|
||||
* and older u-boot.bin with the new U-Boot SPL.
|
||||
*/
|
||||
#define CONFIG_SYS_TEXT_BASE 0x80008000
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x800
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
|
||||
CONFIG_SYS_INIT_RAM_SIZE - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
/* SPL */
|
||||
#define CONFIG_SPL
|
||||
#define CONFIG_SPL_FRAMEWORK
|
||||
#define CONFIG_SPL_NAND_SIMPLE
|
||||
#define CONFIG_SPL_TEXT_BASE 0x40200800
|
||||
#define CONFIG_SPL_MAX_SIZE (54 * 1024)
|
||||
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
|
||||
|
||||
/* move malloc and bss high to prevent clashing with the main image */
|
||||
#define CONFIG_SYS_SPL_MALLOC_START 0x87000000
|
||||
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
|
||||
#define CONFIG_SPL_BSS_START_ADDR 0x87080000 /* end of minimum RAM */
|
||||
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
|
||||
|
||||
/* MMC boot config */
|
||||
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
|
||||
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
|
||||
#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
|
||||
#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
|
||||
|
||||
#define CONFIG_SPL_BOARD_INIT
|
||||
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
||||
#define CONFIG_SPL_LIBDISK_SUPPORT
|
||||
#define CONFIG_SPL_I2C_SUPPORT
|
||||
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
||||
#define CONFIG_SPL_MMC_SUPPORT
|
||||
#define CONFIG_SPL_FAT_SUPPORT
|
||||
#define CONFIG_SPL_SERIAL_SUPPORT
|
||||
|
||||
#define CONFIG_SPL_POWER_SUPPORT
|
||||
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
|
||||
|
||||
/* OneNAND boot config */
|
||||
#ifdef CONFIG_BOOT_ONENAND
|
||||
#define CONFIG_SPL_ONENAND_SUPPORT
|
||||
|
||||
/* OneNAND boot config */
|
||||
#define CONFIG_SYS_ONENAND_U_BOOT_OFFS 0x80000
|
||||
#define CONFIG_SYS_ONENAND_PAGE_SIZE 2048
|
||||
#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x80000
|
||||
@@ -345,13 +181,8 @@
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_BOOT_NAND
|
||||
#define CONFIG_SPL_NAND_SUPPORT
|
||||
#define CONFIG_SPL_NAND_BASE
|
||||
#define CONFIG_SPL_NAND_DRIVERS
|
||||
#define CONFIG_SPL_NAND_ECC
|
||||
|
||||
/* NAND boot config */
|
||||
#ifdef CONFIG_NAND
|
||||
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
||||
#define CONFIG_SYS_NAND_PAGE_COUNT 64
|
||||
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
||||
@@ -363,8 +194,6 @@
|
||||
#define CONFIG_SYS_NAND_ECCSIZE 512
|
||||
#define CONFIG_SYS_NAND_ECCBYTES 3
|
||||
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
|
||||
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
||||
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
|
||||
#endif
|
||||
|
||||
#endif /* __IGEP00X0_H */
|
||||
|
||||
@@ -4,7 +4,7 @@
|
||||
* Steve Sakoman <steve@sakoman.com>
|
||||
*
|
||||
* Configuration settings for the TI OMAP4 Panda board.
|
||||
* See omap4_common.h for OMAP4 common part
|
||||
* See ti_omap4_common.h for OMAP4 common part
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
@@ -36,7 +36,7 @@
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_DHCP
|
||||
|
||||
#include <configs/omap4_common.h>
|
||||
#include <configs/ti_omap4_common.h>
|
||||
#define CONFIG_CMD_NET
|
||||
|
||||
/* GPIO */
|
||||
|
||||
@@ -5,7 +5,7 @@
|
||||
* Steve Sakoman <steve@sakoman.com>
|
||||
*
|
||||
* Configuration settings for the TI SDP4430 board.
|
||||
* See omap4_common.h for OMAP4 common part
|
||||
* See ti_omap4_common.h for OMAP4 common part
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
@@ -19,7 +19,7 @@
|
||||
#define CONFIG_4430SDP 1 /* working with SDP */
|
||||
#define CONFIG_MACH_TYPE MACH_TYPE_OMAP_4430SDP
|
||||
|
||||
#include <configs/omap4_common.h>
|
||||
#include <configs/ti_omap4_common.h>
|
||||
|
||||
/* Battery Charger */
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
|
||||
@@ -4,7 +4,7 @@
|
||||
* Sricharan R <r.sricharan@ti.com>
|
||||
*
|
||||
* Configuration settings for the TI EVM5430 board.
|
||||
* See omap5_common.h for omap5 common settings.
|
||||
* See ti_omap5_common.h for omap5 common settings.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
@@ -17,7 +17,7 @@
|
||||
"uuid_disk=${uuid_gpt_disk};" \
|
||||
"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
|
||||
|
||||
#include <configs/omap5_common.h>
|
||||
#include <configs/ti_omap5_common.h>
|
||||
|
||||
#define CONFIG_CONS_INDEX 3
|
||||
#define CONFIG_SYS_NS16550_COM3 UART3_BASE
|
||||
|
||||
@@ -73,6 +73,10 @@
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_NAND
|
||||
#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
|
||||
#endif
|
||||
|
||||
/* Now bring in the rest of the common code. */
|
||||
#include <configs/ti_armv7_common.h>
|
||||
|
||||
|
||||
@@ -45,11 +45,15 @@
|
||||
#define CONFIG_BOOTDELAY 1
|
||||
|
||||
/*
|
||||
* DDR information. We say (for simplicity) that we have 1 bank,
|
||||
* always, even when we have more. We always start at 0x80000000,
|
||||
* and we place the initial stack pointer in our SRAM.
|
||||
* DDR information. If the CONFIG_NR_DRAM_BANKS is not defined,
|
||||
* we say (for simplicity) that we have 1 bank, always, even when
|
||||
* we have more. We always start at 0x80000000, and we place the
|
||||
* initial stack pointer in our SRAM. Otherwise, we can define
|
||||
* CONFIG_NR_DRAM_BANKS before including this file.
|
||||
*/
|
||||
#ifndef CONFIG_NR_DRAM_BANKS
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#endif
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x80000000
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
@@ -237,7 +241,6 @@
|
||||
#define CONFIG_SPL_BOARD_INIT
|
||||
|
||||
#ifdef CONFIG_NAND
|
||||
#define CONFIG_SPL_NAND_AM33XX_BCH /* OMAP4 and later ELM support */
|
||||
#define CONFIG_SPL_NAND_SUPPORT
|
||||
#define CONFIG_SPL_NAND_BASE
|
||||
#define CONFIG_SPL_NAND_DRIVERS
|
||||
|
||||
73
include/configs/ti_omap3_common.h
Normal file
73
include/configs/ti_omap3_common.h
Normal file
@@ -0,0 +1,73 @@
|
||||
/*
|
||||
* ti_omap3_common.h
|
||||
*
|
||||
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*
|
||||
* For more details, please see the technical documents listed at
|
||||
* http://www.ti.com/product/omap3530
|
||||
* http://www.ti.com/product/omap3630
|
||||
* http://www.ti.com/product/dm3730
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_TI_OMAP3_COMMON_H__
|
||||
#define __CONFIG_TI_OMAP3_COMMON_H__
|
||||
|
||||
#define CONFIG_OMAP34XX
|
||||
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/omap3.h>
|
||||
|
||||
/* The chip has SDRC controller */
|
||||
#define CONFIG_SDRC
|
||||
|
||||
/* Clock Defines */
|
||||
#define V_OSCK 26000000 /* Clock output from T2 */
|
||||
#define V_SCLK (V_OSCK >> 1)
|
||||
|
||||
/* NS16550 Configuration */
|
||||
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
||||
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \
|
||||
115200}
|
||||
|
||||
/* Select serial console configuration */
|
||||
#define CONFIG_CONS_INDEX 3
|
||||
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
|
||||
#define CONFIG_SERIAL3 3
|
||||
|
||||
/* Physical Memory Map */
|
||||
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
|
||||
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
|
||||
|
||||
/*
|
||||
* OMAP3 has 12 GP timers, they can be driven by the system clock
|
||||
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
|
||||
* This rate is divided by a local divisor.
|
||||
*/
|
||||
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
|
||||
|
||||
/* TWL4030 */
|
||||
#define CONFIG_TWL4030_POWER 1
|
||||
|
||||
/* SPL */
|
||||
#define CONFIG_SPL_TEXT_BASE 0x40200800
|
||||
#define CONFIG_SPL_MAX_SIZE (54 * 1024)
|
||||
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
|
||||
#define CONFIG_SPL_POWER_SUPPORT
|
||||
|
||||
#ifdef CONFIG_NAND
|
||||
#define CONFIG_SPL_NAND_SUPPORT
|
||||
#define CONFIG_SPL_NAND_SIMPLE
|
||||
#endif
|
||||
|
||||
/* Now bring in the rest of the common code. */
|
||||
#include <configs/ti_armv7_common.h>
|
||||
|
||||
#endif /* __CONFIG_TI_OMAP3_COMMON_H__ */
|
||||
@@ -9,8 +9,8 @@
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_OMAP4_COMMON_H
|
||||
#define __CONFIG_OMAP4_COMMON_H
|
||||
#ifndef __CONFIG_TI_OMAP4_COMMON_H
|
||||
#define __CONFIG_TI_OMAP4_COMMON_H
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
@@ -159,4 +159,8 @@
|
||||
#define CONFIG_SPL_DISPLAY_PRINT
|
||||
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
|
||||
|
||||
#endif /* __CONFIG_OMAP4_COMMON_H */
|
||||
#ifdef CONFIG_NAND
|
||||
#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
|
||||
#endif
|
||||
|
||||
#endif /* __CONFIG_TI_OMAP4_COMMON_H */
|
||||
@@ -14,8 +14,8 @@
|
||||
* http://www.ti.com/product/omap5432
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_OMAP5_COMMON_H
|
||||
#define __CONFIG_OMAP5_COMMON_H
|
||||
#ifndef __CONFIG_TI_OMAP5_COMMON_H
|
||||
#define __CONFIG_TI_OMAP5_COMMON_H
|
||||
|
||||
#define CONFIG_OMAP54XX
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
@@ -146,4 +146,8 @@
|
||||
#define CONFIG_SPL_DISPLAY_PRINT
|
||||
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
|
||||
|
||||
#endif /* __CONFIG_OMAP5_COMMON_H */
|
||||
#ifdef CONFIG_NAND
|
||||
#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
|
||||
#endif
|
||||
|
||||
#endif /* __CONFIG_TI_OMAP5_COMMON_H */
|
||||
Reference in New Issue
Block a user