Convert CONFIG_OMAP3_SPI to Kconfig

This converts the following to Kconfig: CONFIG_OMAP3_SPI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Minor comment tweaks] Signed-off-by: Tom Rini <trini@konsulko.com>
2026-06-13 15:03:58 +03:00 · 2017-07-26 22:25:30 -05:00
parent a41e3e1480
commit ebb3e43de4
69 changed files with 54 additions and 24 deletions
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -142,7 +142,6 @@
 #endif

 /* SPI */
-#undef CONFIG_OMAP3_SPI
 #define CONFIG_TI_SPI_MMAP
 #define CONFIG_QSPI_SEL_GPIO                   48
 #define CONFIG_SF_DEFAULT_SPEED                48000000
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -123,7 +123,6 @@
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000

 /* SPI */
-#undef	CONFIG_OMAP3_SPI
 #define CONFIG_TI_SPI_MMAP
 #define CONFIG_SF_DEFAULT_SPEED                76800000
 #define CONFIG_SF_DEFAULT_MODE                 SPI_MODE_0
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -234,7 +234,6 @@ MMCARGS
 #if defined(CONFIG_SPI_BOOT)
 /* McSPI IP block */
 #define CONFIG_SPI
-#define CONFIG_OMAP3_SPI
 #define CONFIG_SF_DEFAULT_SPEED		24000000

 #define CONFIG_SPL_SPI_LOAD
--- a/include/configs/cl-som-am57x.h
+++ b/include/configs/cl-som-am57x.h
@@ -29,8 +29,6 @@
 #define CONFIG_SYS_SPD_BUS_NUM 3

 /* SPI Flash support */
-#undef  CONFIG_OMAP3_SPI
-
 #define CONFIG_TI_SPI_MMAP
 #define CONFIG_SF_DEFAULT_SPEED		48000000
 #define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_3
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -16,7 +16,6 @@
 #include <configs/ti_am335x_common.h>

 #undef CONFIG_SPI
-#undef CONFIG_OMAP3_SPI
 #undef CONFIG_BOOTCOUNT_LIMIT
 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC

--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -248,8 +248,6 @@
 #define CONFIG_BMP_16BPP
 #define CONFIG_SCF0403_LCD

-#define CONFIG_OMAP3_SPI
-
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
--- a/include/configs/cm_t3517.h
+++ b/include/configs/cm_t3517.h
@@ -249,8 +249,6 @@
 #define CONFIG_BMP_16BPP
 #define CONFIG_SCF0403_LCD

-#define CONFIG_OMAP3_SPI
-
 /* EEPROM */
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -60,7 +60,6 @@

 /* SPI */
 #undef CONFIG_SPI
-#undef CONFIG_OMAP3_SPI

 /* I2C */

--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -115,7 +115,6 @@
 #define CONFIG_PHY_TI

 /* SPI */
-#undef	CONFIG_OMAP3_SPI
 #define CONFIG_TI_SPI_MMAP
 #define CONFIG_SF_DEFAULT_SPEED                76800000
 #define CONFIG_SF_DEFAULT_MODE                 SPI_MODE_0
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -102,7 +102,6 @@
 #define CONFIG_CMDLINE_EDITING		/* add command line history */
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support */

-#define CONFIG_OMAP3_SPI
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED	100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE	1
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -255,8 +255,6 @@
 #define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET

-#define CONFIG_OMAP3_SPI
-
 /* Defines for SPL */
 #define CONFIG_SPL_OMAP3_ID_NAND

--- a/include/configs/omap3_cairo.h
+++ b/include/configs/omap3_cairo.h
@@ -176,8 +176,6 @@
 #define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET

-#define CONFIG_OMAP3_SPI
-
 /* Defines for SPL */
 #define CONFIG_SPL_OMAP3_ID_NAND

--- a/include/configs/rut.h
+++ b/include/configs/rut.h
@@ -120,7 +120,6 @@
 #define DA8XX_LCD_CNTL_BASE	LCD_CNTL_BASE

 #define CONFIG_SPI
-#define CONFIG_OMAP3_SPI

 #define BOARD_LCD_RESET		115	/* Bank 3 pin 19 */
 #define CONFIG_FORMIKE
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -72,7 +72,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */

 #define CONFIG_SPI
-#define CONFIG_OMAP3_SPI
 #define CONFIG_MTD_DEVICE
 #define CONFIG_SF_DEFAULT_SPEED		(75000000)

--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -213,8 +213,6 @@
 					 CONFIG_SYS_INIT_RAM_SIZE - \
 					 GENERATED_GBL_DATA_SIZE)

-#define CONFIG_OMAP3_SPI
-
 /*
 * USB
 *
--- a/include/configs/ti_armv7_omap.h
+++ b/include/configs/ti_armv7_omap.h
@@ -16,9 +16,6 @@
 #define CONFIG_SYS_OMAP24_I2C_SPEED	100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE	1

-/* SPI IP Block */
-#define CONFIG_OMAP3_SPI
-
 /*
 * GPMC NAND block.  We support 1 device and the physical address to
 * access CS0 at is 0x8000000.