With a newer pylint we get a warning about how offset could be used
before assigned. This is because when the underlying filesystem wasn't
one that is supported we would have runtime test failures. Address this
by raise'ing an Exception if fs is not supported.
Signed-off-by: Tom Rini <trini@konsulko.com>
With a newer pylint version we get a warning about how mounted_test_fn
could be used before assignment. Evaluating the code, this can't happen
because we check for "not have_writable_fs_partition" and return before
moving to the part of the tests which use mounted_test_fn. However, we
should instead have this written so that we only try this part of the
test if have_writable_fs_partition is set, and this also fixes the
warning. As part of this we also move test_f and mounted_test_fn to the
section of code that already only does this if
have_writable_fs_partition is set.
Signed-off-by: Tom Rini <trini@konsulko.com>
When running a newer version of pylint it will complain that page_size
may be used before being assignment. Looking deeper what is going on is
that we could run in to the case where the regex we run for any of the
flash information fails but since we don't have a result, we don't check
it either. In the case of the rest of the numerical values we then have
some assignment (multiplying by some value) and so pylint doesn't
complain. Rework things to assert that each regex has a result and so
failure will stop the test and we won't have any use before assignment.
Signed-off-by: Tom Rini <trini@konsulko.com>
Up to now root has been the parent device for all block devices created via
calling ConnectController(). This does not work well together with the
implementation of bootstd.
Add a dummy parent device for all EFI block devices.
With this change EFI block devices are also accessible via commands like
'cat', 'load', and 'ls'.
=> dm tree
Class Seq Probed Driver Name
-----------------------------------------------------------
efi 0 [ + ] EFI block driver `-- efi
blk 3 [ + ] efi_blk `-- efi.efiblk#0
partition 0 [ + ] blk_partition `-- efi.efiblk#0:1
=> ls efiloader 0:1
13 hello.txt
7 u-boot.txt
2 file(s), 0 dir(s)
=> cat efiloader 0:1 hello.txt
Hello world!
=> efidebug dh
0000000018df1700 (efi.efiblk#0:1)
/VenHw(dbca4c98-6cb0-694d-0872-819c650cb7b8)/HD(1,MBR,0xd1535d21,0x1,0x7f)
Block IO
Simple File System
Adjust the event dump unit test to consider the new event spy.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
At present the 'ut' command handles its flags in a strange way, in that
they must come after the subcommand.
So, we must use 'ut bloblist -r2' to run the bloblist tests twice. This
is an artefact of the way tests were run, through subcommands.
It is now possible to correct this, by doing flag-processing before
running the suite.
Update the code to handle this, so that 'ut -r2 bloblist' works. Update
the 'test_suite' test to check the new arguments.
Add a sanity-check for -I while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Enhance the ut command to accept a comma-separated list of test suites
to run. Report the summary information for these at the end.
Signed-off-by: Simon Glass <sjg@chromium.org>
When tests are all in the same suite it is annoying to have to read all
the common text after each name. Skip this to help the user.
Signed-off-by: Simon Glass <sjg@chromium.org>
USB tests on ext partitions can fail with the following output
test/py/tests/test_usb.py:245: in test_usb_part
'fstype usb %d:%d' % i, part_id
E TypeError: not enough arguments for format string
So add brackets around the format string arguments to prevent the
error.
Fixes: a730947974 ("test/py: usb: Distinguish b/w ext2/ext4 partitions")
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Love Kumar <love.kumar@amd.com>
Simon Glass <sjg@chromium.org> says:
The current method of running unit tests relies on subcommands of the
ut command. Only the code in each subcommand knows how to find the tests
related to that subcomand.
This is not ideal and we now have quite a few subcommands which do
nothing but locate the relevant tests in a linker list, then call a
common function to run them.
This series adds a list of test suites, so that these subcommands can be
removed.
An issue with 'ut all' is that it doesn't record how many tests failed
overall, so it is necessary to examine copious amounts of output to look
for failures. This series adds a new 'total' feature allow recording the
total number of failed tests.
To help with 'ut all' a new pytest is created which runs it (as well as
'ut info') and makes sure that all is well. Due to the 'ut all' failures
this does not pass, so the test is disabled for now. It is here because
it provides security against misnaming a test suite and causing it not
to run.
Future work may:
- get 'ut all' passing
- enable test_suite() in CL, to ensure that 'ut all' keeps passing
- record duration of each suite
- allow running the tests in random order to tease out dependencies
- tweak the output to remove common prefixes
- getting rid of bootstd, optee and seame 'ut' subcommands
Link: https://lore.kernel.org/r/20250120212613.516664-1-sjg@chromium.org
Add a function to show the stats, so we can decide when to print it.
This slightly adjusts the output, so that any 'test not found' message
appears on its own line after all other output.
The 'failures' message now appears in lower case so update pytest
accordingly.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is not needed anymore. If a test suite is not built, then it will
have no linker-list entries. So we can just check for that and know that
the suite is not present.
This allows removal of the #ifdefs and the need to keep them in sync
with the associated Makefile rules, which has actually failed, since the
help does not match what commands are actually present.
Signed-off-by: Simon Glass <sjg@chromium.org>
The 'info' test is not a real test. With the new suite array we can drop
this and the associated special-case code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a Python test which runs 'ut all' and then checks that the expected
suites are present and all tests in each suite are run.
This can help to check that nothing is missing.
Update 'ut info' to ignore the 'all' suite when counting the number of
suites, since that is really just a combination of all the other suites.
Adjust the message for skipped tests so that appears even if no
particular test was selected. This helps the new 'test_suite' test see
what is going on.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass <sjg@chromium.org> says:
This series provides a way to keep track of the images used in bootstd,
including the type of each image.
At present this is sort-of handled by struct bootflow but in quite an
ad-hoc way. The structure has become quite large and is hard to query.
Future work will be able to reduce its size.
Ultimately the 'bootflow info' command may change to also show images as
a list, but that is left for later, as this series is already fairly
long. So for now, just introduce the concept and adjust bootstd to use
it, with a simple command to list the images.
This series includes various alist enhancements, to make use of this new
data structure a little easier.
[trini: Drop patch 18 and 19 for now due to size considerations]
Link: https://lore.kernel.org/r/20241115231926.211999-1-sjg@chromium.org
Add a new 'bootstd images' command, which lists the images which have
been loaded.
Update some existing tests to use it. Provide some documentation about
images in general and this command in particular.
Use a more realistic kernel command-line to make the test easier to
follow.
Signed-off-by: Simon Glass <sjg@chromium.org>
Raymond Mao <raymond.mao@linaro.org> says:
Motivations for changes:
Current SMBIOS library and command-line tool is not fully matching with
the requirements:
1. Missing support for other mandatory types (#7, #9, #16, #17, #19).
2. Only a few platforms support SMBIOS node from the device tree.
3. Values of some fields are hardcoded in the library other than fetching
from the device hardware.
4. Embedded data with dynamic length is not supported (E.g. Contained
Object Handles in Type #2 and Contained Elements in Type #3)
Changes:
1. Refactor the SMBIOS library and command-line tool to better align with
the SMBIOS spec.
2. Create an arch-specific driver for all aarch64-based platforms to fetch
SMBIOS private data from the device hardware (processor and cache).
3. Create a sysinfo driver to poppulate platform SMBIOS private data.
4. Add generic SMBIOS DTS file for arm64 platforms for those common strings
and values which cannot be retrieved from the system registers.
Vendors can create their own SMBIOS node using this as an example.
For those boards without SMBIOS nodes, this DTS file can be included to
have a generic SMBIOS information of the system.
5. Add support for Type #7 (Cache Information) and link its handles to
Type #4.
6. To minimize size-growth for those platforms which have not sufficient
ROM spaces or the platforms which don't need detailed SMBIOS
information, new added fields are only being built when kconfig
GENERATE_SMBIOS_TABLE_VERBOSE is selected.
Once this patch is acceptted, subsequent patch sets will add other missing
types (#9, #16, #17, #19).
Tests:
To test this with QEMU arm64, please follow the guide on dt_qemu.rst to
get a merged DT to run with.
```
qemu-system-aarch64 -machine virt -machine dumpdtb=qemu.dtb
cat <(dtc -I dtb qemu.dtb) <(dtc -I dtb ./dts/dt.dtb | grep -v /dts-v1/) \
| dtc - -o merged.dtb
qemu-system-aarch64 -machine virt -nographic -bios u-boot.bin \
-dtb merged.dtb
```
Link: https://lore.kernel.org/r/20241206225438.13866-1-raymond.mao@linaro.org
Update the cmd according to the changes of the smbios library:
1. Refactor smbios cmd print functions to match the content defined
by the specification.
2. Add new print functions for Type 3, 4 and 7.
3. Remove the fallback string "Not specified" from smbios_get_string,
as the spec requires a NULL output for those undefined strings.
4. Update the test_cmd_smbios_sandbox pytest expected result to
align with the smbios library changes and add new pytest
test_cmd_smbios_sysinfo_verbose to test the verbose smbios
output.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
test_extension.py assumes that no extension is known at test start.
This assumption is wrong because we do not come out of reboot.
A prior test may have already hunted for the extension bootdev.
Remove the invalid assert.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
AMD/Xilinx changes for v2025.04-rc1
binman:
- Separate binman description from main DT
zynqmp:
- Enable binman for ZynqMP platforms
- DT sync with Linux v6.12
- Update usb5744 hub for SOMs
common:
- Drop SPL_FIT_GENERATOR support
versal2
- Enable OPTEE layers
ospi:
- Refactor the flash reset functionality
pytest:
- Fix tcminit mode handling
We don't need the fallback anymore. Remove the code which uses these
files.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
We don't need the fallback anymore. As a first step to removing it,
drop the try...except clauses and unindent the code.
This produces a large diff but there are no other code changes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Like for test_fs, no need to mess with loop mounts.
Signed-off-by: Richard Weinberger <richard@nod.at>
Tweaks to reduce diff (keep mnt variable):
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a parameter to indicate the size of the image to build.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Since no mounting happens anymore, rename the "mnt"
directory to "scratch" and the related variables.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
There is no need to mount the filesystem on the host side.
All filesystem tools offer some way to fill the fs without mounting.
So, create the content on the host side, create and fill the fs
without mounting.
No more sudo or guestmount needed.
This new approach works because the tests don't care about user IDs
and no device files are needed.
If user IDs start to matter it's still possible to use wrapper
tools like fakeroot in future while filling the fs.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Rename actual android bootmethod test to specify it's for boot image
version 4.
Add a unit test for testing the Android bootmethod with boot image
version 2.
This requires another mmc image (mmc8) to contain the following
partitions:
- misc: contains the Bootloader Control Block (BCB)
- boot_a: contains a fake generic kernel image
we can test this with:
$ ./test/py/test.py --bd sandbox --build -k test_ut # build the mmc8.img
$ ./test/py/test.py --bd sandbox --build -k bootflow_android
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Link: https://lore.kernel.org/r/20241126-adnroidv2-v4-5-11636106dc69@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Currently, MMC test runs on default mmc modes, adding a provision to
support multiple mmc modes through user defined parameters.
Signed-off-by: Love Kumar <love.kumar@amd.com>
'usb part' command shows the partition maps and shows the partition type
by displaying number such as 0c, 83 etc. Observed that ext2 and ext4
partitions shows the same number, i.e, 83, so, using the fstype command
to distiniguish between ext2 and ext4 partitions.
Signed-off-by: Love Kumar <love.kumar@amd.com>
'mmc part' command shows the partition maps and shows the partition type
by displaying number such as 0c, 83 etc. Observed that ext2 and ext4
partitions shows the same number, i.e, 83, so, using the fstype command
to distiniguish between ext2 and ext4 partitions.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Use an 'r' string to avoid a warning:
test/py/tests/test_spi.py:698: DeprecationWarning: invalid escape
sequence '\s'
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Create a new disk for use with tests, which contains the new 'testapp'
EFI app specifically intended for testing the EFI loader.
Attach it to the USB device, since most testing is currently done with
mmc.
Initially this image will be used to test the EFI bootmeth.
Fix a stale comment in prep_mmc_bootdev() while we are here.
For now this uses sudo and a compressed fallback file, like all the
other bootstd tests. Once this series is in, the patch which moves
this to use user-space tools will be cleaned up and re-submitted.
Signed-off-by: Simon Glass <sjg@chromium.org>
The tests test_usb_ext4load_ext4write, test_usb_ext2load and
test_usb_load depend on the command ext4write being present not just
the feature of being able to write to an ext4 file system. So update
their dependencies to include the ext4write command itself. This will
prevent spurious test failures when running the USB tests against USB
storage with an ext2/ext4 partition but no ext4write command available.
Fixes: 1c5b6edad3 ("test/py: usb: Add tests for USB device")
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Love Kumar <love.kumar@amd.com>
When test_usb_load finds multiple partitions of the same type then
it will cause a test failure. The call to write the test file will
write a different test file to each partition but only return the
name and size of the last one written. So the test then fails to
load the test file from the first partition as it uses the name of
a file on a different partition.
Refactor the code so that only one test file is written at a time
and is written to only the partition being tested at that time. This
allows the correct file name to always be available to the code that
runs the load command. This reduces the number of files written and
also the number of calls to crc32 needed.
Fixes: 1c5b6edad3 ("test/py: usb: Add tests for USB device")
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Love Kumar <love.kumar@amd.com>
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
With this series opendir, readdir, closedir are implemented for ext4.
These functions are needed for the UEFI sub-system to interact with
the ext4 file system.
To reduce code growth the functions are reused to implement the ls
command for ext4.
A memory leak in ext4fs_exists is resolved.
ext4fs_iterate_dir is simplified by removing a redundant pointer copy.
Link: https://lore.kernel.org/r/20241026064048.370062-1-heinrich.schuchardt@canonical.com
Now that opendir, readir, closedir are implemented for ext4 we can use
fs_ls_generic() for implementing the ls command.
Adjust the unit tests:
* fs_ls_generic() produces more spaces between file size and name.
* The ext4 specific message "** Can not find directory. **\n" is not
written anymore.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Update spi negative test case to prevent SF command
from overwriting relocation memory area.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Love Kumar <love.kumar@amd.com>
To conform with other messages capitalize the first letter:
%s/enter description/Enter description/g
Adjust the unit tests accordingly.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
