Add a new netboot_run() function which can be used for simple network
operations, such as loading a file. Put the implementation in an
internal function, used by the existing code.
Place this function into the net/ code, so that it does not need the
command line to be available.
Document which network operations are supported, i.e. a limited subset,
for now.
For the one board which uses lwip, it is not quite clear how to avoid
using the cmdline interface. This will need some discussion.
Signed-off-by: Simon Glass <sjg@chromium.org>
Adjust the remaining call in this function to use the bootm API. This
will allow PXE to work without the command line.
Signed-off-by: Simon Glass <sjg@chromium.org>
A compressed booti image relies on the compression-format's header at
the start to indicate which compression algorithm is used.
We don't support this elsewhere in U-Boot, so assume that a compressed
file is always a booti file. Once it is compressed, a check is made to
make sure that it actually is.
Simplify the implementation by adding a new function which returns the
booti image-type if compression is detected.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present the booti format is handled separately, in its own command.
Provide a way to boot uncompressed booti images within the bootm code,
so that eventually we can boot these images without CONFIG_CMDLINE
Update bootm_init() to attach the images for all formats which use them.
Add some debugging while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Arm invented a new format for arm64 and something similar is also used
with RISC-V. Add this to the list of supported formats and provide a way
for the format to be detected on both architectures.
Update the genimg_get_format() function to support this.
Fix up switch() statements which don't currently mention this format.
Booti does not support a ramdisk, so this can be ignored.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use an enum so it is clearer that these options are related. Update
genimg_get_format(), tidy up the function comment and move it to the
header file, since it is exported.
Signed-off-by: Simon Glass <sjg@chromium.org>
This code cannot be compiled by boards which don't have this option. Add
an accessor in the header file to avoid another #ifdef
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Rather than holding the state in the implementation code, move it to the
command code. The state is now passed to the implementation functions
and can there (with future work) be pass in from bootstd, without going
through the commands.
Signed-off-by: Simon Glass <sjg@chromium.org>
This structure is supposed to handle any type of booting
programmatically, i.e. without needing a command to be executed. Move
the x86-specific members into it and use it instead of
struct zboot_state. Provide a macro so access is possible without adding
lots of #ifdefs to the code.
This will allow the struct to be used for all four types of booting
(bootm, bootz, booti and zboot).
Call bootm_init() to init the state, to match other boot methods.
Note that some rationalisation could be performed on this. But this
is tricky since addresses are stored as strings in several places. Also
some strings combine multiple arguments into one. So to keep this task
somewhat manageable, we content ourselves with just getting everything
into the same struct
Signed-off-by: Simon Glass <sjg@chromium.org>
rsa_verify_openssl() is used in lib/rsa/rsa-verify.c to authenticate data
when building host tools.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Branch contains bringup of Acer Iconia Tab A500 (codename picasso), a
Tegra 2 Android device with decent Linux kernel support. Ondevice tests
and U-Boot test suit all passed.
CI:
* https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/24709
UEFI:
* create a parent device for all EFI block devices
* move lmb_map_update_notify() to EFI
* make efi_add_memory_map_pg() static
* remove comparisons to string literals from runtime
* ix potential deref-after-null
Other:
* avoid superfluous value check in lmb_map_update_notify()
* support more efi protocols in uuid_guid_get_str()
When building with qemu_arm64_defconfig with CONFIG_CC_OPTIMIZE_FOR_DEBUG=y
and CONFIG_EFI_LOADER=n an error undefined reference to efi_add_memory_map_pg
occurs.
Move the EFI dependent part of lmb_map_update_notify() to the EFI
sub-system.
Reported-by: Liya Huang <1425075683@qq.com>
Acked-by: Liya Huang <1425075683@qq.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Instead of testing the value of parameter op at runtime use an enum to
ensure that only valid values are used.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Variable $fdtfile needs to be set for automatically loading a device-tree
from the ESP or boot partition.
* Set CONFIG_DEFAULT_FDT_FILE in the defconfig.
* Add $fdtfile to the default environment.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
clock/rk3288-cru.h in include/dt-bindings is almost identical to the
version in dts/upstream, remove the copy from include/dt-bindings to
only use the version from dts/upstream.
One clk, SCLK_MAC_PLL, is not part of the upstream bindings, this clk is
not used by upstream, in-tree or vendor DTs and can safely be dropped.
No functional change to board DTs is intended with this removal.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The device tree for rk3036 combined is now
available in the /dts/upstream directory.
Use imply OF_UPSTREAM to migrate all rk3036 boards.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
As per TRM[0] Section 8.7.1 "TPS6594-Q1 Registers", LDOx_Vout
bit 6-1, define the NVM voltage settings.
Along side table 8-4 of above TRM, shows voltage to value mapping.
Driver wrongly using bits 5-1 to calculate voltage, and to convert
voltage to value driver was using buck's calculation.
So fix those calculation.
[0]: https://www.ti.com/lit/ds/symlink/tps6594-q1.pdf
Fixes: 5d7dbd22cf ("power: regulator: tps65941: use function callbacks for conversion ops")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
The Acer Iconia A500 is a tablet computer designed, developed and
marketed by Acer Inc. It is powered by 1 GHz Nvidia Tegra 2 processor
and 1GB DDR2 RAM. The A500 is sold with 64 GB, although both 16 GB
and 32 GB models are available.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Add support for starting TFA from U-Boot running in EL3 as part of
fitImage boot, so the user can start U-Boot in the highest privilege
level on the platform, bundle TFA, Linux, DT into a single fitImage
and boot such a bundle as a whole.
There are two main benefits of this approach. First is the ability
to run U-Boot in EL3, where it has unrestricted access to the entire
system and can act as a useful debug tool, as it was always intended
to be used. Second is the ability to easily and safely update of any
component in the fitImage, be it TFA, Linux or DT.
The boot process is similar to regular Linux with DT fitImage boot
process, except the TFA has to be bundled into the fitImage. For the
bundling instructions, see below. The TFA is started as a 'loadables'
with custom U_BOOT_FIT_LOADABLE_HANDLER and armv8_switch_to_el2_prep()
handling implemented in board code, and performing the handoff and
boot in case the TFA was loaded.
The loadables handler is optional and meant to set up any sort of
handoff structures used by the TFA BL31 or perform any other setup
that is needed by the blob. The custom armv8_switch_to_el2_prep()
has to implement the jump to TFA BL31 with return to U-Boot just
before booting the Linux kernel.
Example fitImage image and configuration section:
/dts-v1/;
/ {
description = "Linux kernel with FDT blob and TFA BL31";
images {
kernel-1 { ... };
fdt-1 { ... };
atf-1 { /* This is the TFA BL31 image */
description = "TFA BL31";
data = /incbin/("../build/plat/release/bl31.bin");
type = "tfa-bl31";
arch = "arm64";
os = "arm-trusted-firmware";
compression = "none";
load = <0x46400000>;
entry = <0x46400000>;
};
};
configurations {
default = "conf-1";
conf-1 {
description = "Boot Linux";
kernel = "kernel-1";
fdt = "fdt-1";
loadables = "atf-1"; /* This is the TFA BL31 loadable */
};
};
};
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Implement library function strnstr().
Implement strstr() using strnstr().
Sort the includes.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
[jf: replace <stdint.h> by <limits.h>, folded from next patch]
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Move the initialization of the ethernet devices out of the new_netif()
function. Indeed, new_netif() accepts a struct device argument, which
is expected to be valid and active. The activation and selection of
this device are achieved by eth_init() (on first time the network
stack is used) and eth_set_current(). This is what takes care of the
ethrotate and ethact environment variables. Therefore, move these calls
to a new function: net_lwip_set_current(), and use it whenever a
net-lwip command is run.
This patch hopefully fixes the incorrect net-lwip behavior observed on
boards with multiple ethernet interfaces [1].
Tested on an i.MX8MPlus EVK equipped wih two ethernet ports. The dhcp
command succeeds whether the cable is plugged into the first or second
port.
[1] https://lists.denx.de/pipermail/u-boot/2025-January/576326.html
Reported-by: E Shattow <e@freeshell.de>
Tested-by: E Shattow <e@freeshell.de>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
u-boot-dfu-20250211:
CI:
- https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/24556
Android:
- Handle boot images with missing DTB
Usb gadget:
- Fix nullptr in g_dnl when serial# is unset
- Add missing schedule() in f_mass_storage gadget
- Add support for STih407 in dwc3-generic
- Fix usb clocks on STih407
- Migrate STih407 to DM_USB_GADGET
Add the optargs variable so that we can set optional arguments while
booting.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Heiko Schocher <hs@denx.de> says:
In linux we have the option to create the name of a led
optionally through the following properties:
- function
- color
- function-enumerator
This series adds support for parsing this properties if there
is no label property.
Link: https://lore.kernel.org/r/20250128135246.74838-1-hs@denx.de
[trini: Document name parameter in led.h]
in linux we have the option to create the name of a led
optionally through the following properties:
- function
- color
- function-enumerator
This patch adds support for parsing this properties if there
is no label property.
The led name is created in led_post_bind() and we need some
storage place for it. Currently this patch prevents to use
malloc() instead it stores the name in new member :
char name[LED_MAX_NAME_SIZE];
of struct led_uc_plat. While at it append led tests for the
new feature.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Fixes annoying warnings of the following type when built with W=1 (for
each file including fpga.h):
CC drivers/fpga/fpga.o
In file included from /mnt/data/adahl/src/u-boot/include/xilinx.h:7,
from /mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:10:
/mnt/data/adahl/src/u-boot/include/fpga.h:61:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
61 | const fpga_desc *const fpga_get_desc(int devnum);
| ^~~~~
/mnt/data/adahl/src/u-boot/include/fpga.h:81:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
81 | const fpga_desc *const fpga_validate(int devnum, const void *buf,
| ^~~~~
/mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:36:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
36 | const fpga_desc *const fpga_get_desc(int devnum)
| ^~~~~
/mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:53:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
53 | const fpga_desc *const fpga_validate(int devnum, const void *buf,
| ^~~~~
Do some type and cast cleanup on that fpga_desc type while at it.
Link: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wignored-qualifiers
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20250121162213.1477506-1-ada@thorsis.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
So far only VBE-simple is implemented in U-Boot. This supports a single
image which can be updated in situ.
It is often necessary to support two images (A and B) so that the board
is not bricked if the update is interrupted or is bad.
In some cases, a non-updatable recovery image is desirable, so that the
board can be returned to a known-good state in the event of a serious
failure.
Introduce ABrec which provides these features. It supports three
independent images and the logic to select the desired one on boot.
While we are here, fix a debug message to indicate the function it
called. Provide a maintainers entry for VBE.
Note that fwupdated only supports VBE-simple so far, but supports for
ABrec will appear in time.
Signed-off-by: Simon Glass <sjg@chromium.org>
When VBE operates within VPL it does not want the FDT to be changed.
Provide a way to disable this feature.
Move the FIT_IMAGE_TINY condition out of spl_fit_record_loadable() so
that both conditions are together. This makes the code easier to
understand.
Replace the existing fit_loaded member, which is no-longer used.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a linker symbol which can be used to mark relocation code, so it can
be collected by the linker and copied into a suitable place and executed
when needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some phases may wish to use full FIT-loading and others not, so allow
this to be controlled.
Add some debugging while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
STM32 MPU:
- Remove dt-bindings headers available in dts/upstream
- Fixes for stm32prog
- Enable CONFIG_SYS_64BIT_LBA for STM32MP15/13/25 defconfigs
- Add upport of ck_usbo_48m in pre-reloc stage for STM32MP13
- Clean env_get_location() for STM32MP1
- Fix board_get_usable_ram_top() to fix infinite loop in cache
management for STM32MP2.
- Fix ck_flexgen_08 frequency for STM32MP2
STM32 MCU:
- Tune CYCLIC_MAX_CPU_TIME_US to avoid cyclic warning for STM32F469-Disco
- Tune CYCLIC_MAX_CPU_TIME_US to avoid cyclic warning for STM32F769-Disco
Some dt-binding headers mask the upstream ones which can lead to build
failures, or worse: super weird bugs, if they get out of sync.
Remove these headers so our devicetree and binding headers will both be
in sync with upstream.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Weijie Gao <weijie.gao@mediatek.com> says:
This patch series add support for MediaTek MT7987 SoC with its reference
boards and related drivers.
This patch series add basic boot support on eMMC/SD/SPI-NOR/SPI-NAND for these
boards. The clock, pinctrl drivers and the SoC initializaton code are also
included.
Link: https://lore.kernel.org/r/cover.1737621362.git.weijie.gao@mediatek.com
This patch adds general board files based on MT7987 SoC.
MT7987 uses one mmc controller for booting from both SD and eMMC, and the
pins of mmc controller are also shared with one spi controller.
So three configs are need for these boot types:
1. mt7987_rfb_defconfig - SPI-NOR (spi2) and SPI-NAND (spi0)
2. mt7987_emmc_rfb_defconfig - eMMC + SPI-NOR (spi2)
3. mt7987_sd_rfb_defconfig - SD + SPI-NOR (spi2)
Note: spi2 also supports booting from SPI-NAND, but not the default option.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Multiple drivers copy the MDIO instance name from struct mii_phy to
struct bb_miiphy_bus, but the name field in these two structs have
different lengths, the bb_miiphy_bus one is 16 bytes, the source one
is 32 bytes. Make sure these two lengths are always synchronized, use
MDIO_NAME_LEN for both.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
It seems that every remaining system which enables BITBANGMII also
enables BITBANGMII_MULTI . Remove the BITBANGMII_MULTI symbol and
assume it is always enabled. This allows removal of a bit of legacy
code. No functional change intended.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-tpm/-/pipelines/24375
We have use cases where a previous stage boot loader doesn't have any
TPM drivers. Instead of extending the hardware PCRs it produces an
EventLog that U-Boot later replays on the hardware.
The only real example we have is TF-A, which produces the EventLog using
hashing algorithms created at compile time. This creates a problem to the
TPM since measurements need to extend all active PCR banks. Up to now
we were exiting refusing the extend measurements.
TPMs can be instructed to change their active PCR banks, as long as the
device resets immediately after a reconfiguration. This PR is adding
that functionality. U-Boot can now scan the currently active TPM PCR
banks, the ones it was compiled to support and the ones present in an
EventLog. It the reconfigures the TPM on the fly with the correct algorithms.
Add initial support for Marvell PXA1908. The SoC has 4 Cortex-A53 cores,
a GC7000UL GPU and a variety of peripheral controllers.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
