Linux uses just regulators { }; instead of voltage-regulators { };, so
this change aligns the DTSes found in the two projects.
The max8997 driver does not yet parse the regulators node, so we can
safely change its name without breaking anything.
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Instead of maxim,max8997. Linux uses maxim,max8997-pmic, so with this
change we align the trats DTS with its linux counterpart.
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Linux uses just regulators { }; instead of voltage-regulators { };, so
this change aligns the DTSes found in the two projects.
The max8998 driver does not yet parse the regulators node, so we can
safely change its name without breaking anything.
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Linux uses just regulators { }; instead of voltage-regulators { };, so
this change aligns the DTSes found in the two projects.
The max8998 driver does not yet parse the regulators node, so we can
safely change its name without breaking anything.
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
With this both linux and u-boot uses the same node name, which
simplifies devicetree parsing in s2mps11 driver.
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The sd-vsel-gpios property in the root of the PMIC node is deprecated
and therefore not parsed by the driver anymore. We can safely remove
this as it wasn't used anyway due to the pad not having the correct
pinmux settings.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The sd-vsel-gpios property in the root of the PMIC node is deprecated
and therefore not parsed by the driver anymore. We can safely remove
this as it wasn't used anyway due to the pad not having the correct
pinmux settings.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The existing compatible name for U-Boot's k3 system controller driver
i.e "ti,am625-system-controller" has been added to linux[1] device-tree.
This compatible in kernel is meant for configuring the Control Module
registers (CTRL_MMR0).
However in U-Boot, the matching driver was being used to load the system
firmware on the secure M-cores by the R5 SPL and therefore must be
updated to a different compatible to avoid conflicts.
Therefore, this patch renames all references of the compatible to
"ti,am654-tisci-rproc-r5". The "-r5" is appended so as to avoid any
future conflicts since r5 specific compatibles should only be useful for
U-Boot.
[1]: 5959618631fe ("dt-bindings: mfd: ti,j721e-system-controller: Add compatible string for AM654")
https://lore.kernel.org/r/20250421214620.3770172-2-afd@ti.com
Signed-off-by: Anshul Dalal <anshuld@ti.com>
On i.MX9 platforms, when booting from USB, the U-Boot environment is
always assumed to be in RAM. However, this causes the boot to hang when
`CONFIG_ENV_IS_NOWHERE` is not enabled. The boot also hangs even if the
environment is present in another storage media (for example, eMMC). Fix
the issue by correctly handling the U-Boot environment's location when
booting from USB. Also for i.MX95, set the environment location based on
the ENV config and not solely based on the boot device type.
Suggested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
The existing compatible name for U-Boot's k3 system controller driver
i.e "ti,am625-system-controller" has been added to linux[1] device-tree.
This compatible in kernel is meant for configuring the Control Module
registers (CTRL_MMR0).
However in U-Boot, the matching driver was being used to load the system
firmware on the secure M-cores by the R5 SPL and therefore must be
updated to a different compatible to avoid conflicts.
Therefore, this patch renames all references of the compatible to
"ti,am654-tisci-rproc-r5". The "-r5" is appended so as to avoid any
future conflicts since r5 specific compatibles should only be useful for
U-Boot.
[1]: 5959618631fe ("dt-bindings: mfd: ti,j721e-system-controller: Add compatible string for AM654")
https://lore.kernel.org/r/20250421214620.3770172-2-afd@ti.com
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Generating an ldr boot stream containing U-Boot Proper was never added
to U-Boot because it is done by the ADI Yocto layer. Add it to U-Boot to
support projects that do not use that layer.
Signed-off-by: Philip Molloy <philip.molloy@analog.com>
Update dev-data and clk-data to include CPSW device which is required to
enable Ethernet boot for SK-AM69.
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Update dev-data and clk-data to enable Ethernet boot using CPSW on
SK-AM62P-LP.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Update dev-data and clk-data to include CPSW device which is required to
enable Ethernet boot.
Reviewed-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
This reverts commit 35bddf8896.
Bind method of "am65_cpsw_nuss" driver will ensure binding of it's child
driver "am65_cpsw_nuss_ports", and there is no need to probe CPSW driver
explicitly.
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
This reverts commit 93c43a8365.
Bind method of "am65_cpsw_nuss" driver will ensure binding of it's child
driver "am65_cpsw_nuss_ports", and there is no need to probe CPSW driver
explicitly.
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
This reverts commit e58d928485.
Bind method of am65_cpsw_nuss driver will ensure binding of it's child
driver am65_cpsw_nuss_ports, and there is no need to call CPSW driver
explicitly. Remove explicit probing of CPSW driver for AM62x.
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
In order to compile code that uses <asm/atomic.h> on sandbox, we must
provide this header. RISC-V shows us today how to do so with the generic
header implementation, so copy that.
Signed-off-by: Tom Rini <trini@konsulko.com>
Normally, local_save_flags is used as part of the local_irq_* macros, so
remove that as it's unused. Make local_irq_save do something to the
passed variable so that it won't trigger unused variable warnings later.
Signed-off-by: Tom Rini <trini@konsulko.com>
If there is an unhandled KCS/BPC pending interrupt after reboot,
the KCS/BPC Linux driver may trigger interrupts immediately upon
registering the irq. However, since the driver is not yet initialized
to handle them, this can lead to unexpected behavior.
To prevent this, disable KCS/BPC interrupts in u-boot to avoid pending
interrupts from being raised before the Linux driver is fully initialized.
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Retronix R-Car V4H Sparrow Hawk EVTA1 is populated with Spansion S25FS512S,
EVTB1 is populated with Winbond W77Q51NW. Describe the SPI NOR using generic
"jedec,spi-nor" compatible, because both flashes can be auto-detected based
on their built-in IDs.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The Retronix R-Car V4H Sparrow Hawk EVTB1 uses 1V8 IO voltage supply
for VDDQ18_25_AVB power rail. Update the AVB0 pinmux to reflect the
change in IO voltage. Since the VDDQ18_25_AVB power rail is shared,
all four AVB0, AVB1, AVB2, TSN0 PFC/GPIO POC[7..4] registers have to
be configured the same way.
Correct the voltage for EVTA1 boards accordingly by patching the U-Boot
control DT in SPL.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Invert the polarity of microSD voltage selector on Retronix R-Car V4H
Sparrow Hawk board. The voltage selector was not populated on prototype
EVTA1 boards, and is implemented slightly different on EVTB1 boards. As
the EVTA1 boards are from a limited run and generally not available,
update the DT to make it compatible with EVTB1 microSD voltage selector.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Change the shift patterns for the unaligned memory move and copy code
to deal with big-endian by definign macros to change the shfit left and
right to go the opposite way.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Introduce the initial device tree support for Andes Voyager board.
We will convert to OF_UPSTREAM once the patch series for kernel is merged.
Signed-off-by: Randolph Sheng-Kai Lin <randolph@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The Voyager is Andes' first RISC-V development board.
It is built around Qilai SoC,
which includes Andes AX45MP quad-core cluster.
Introduce the Kconfig entry for the Voyager board.
Signed-off-by: Randolph Sheng-Kai Lin <randolph@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The commit d92fdb6067 ("binman: Add option for pointing to separate
description") added support for separating binman description to own file
not the be the part of DT for OS.
The main reason is that binman is not passing dt schema validation that's
why want to keep it separated.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Properties didn't match dt binding that's why should be fixed.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
OpenSBI expects mmu-type to be present in DT that's why add it. Without it
OpenSBI disable CPU node which ends up in not working boot.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
ifdef CONFIG_CPU only works in U-Boot proper but macro is not working when
XPL phases are used. In this case CONFIG_SPL_CPU is also defined and can be
disabled which is causing compilation error.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
U-Boot typically can be loaded from different storage media, such as
eMMC, SD card, SPI flash, but also from non-persistent media such as USB
(via proprietary protocols loading directly into SRAM, or fastboot, DFU,
etc..), JTAG, ...
This information is usually reported by the BootROM via some proprietary
mechanism (some specific address in registers/DRAM for example). For
Rockchip, that information is stored in a register
(BROM_BOOTSOURCE_ID_ADDR).
While we already have the information about which medium was used to
load U-Boot proper from SPL (via /chosen/u-boot,spl-boot-device), this
new property represents the medium used to load U-Boot first phase
(depending on configuration, can be VPL/TPL/SPL) which absolutely may
differ from the one used to load U-Boot proper!
It would be useful to know which medium was used to load the first phase
of U-Boot, for example to check fallback mechanisms (proper loaded from
a different medium than first phase) are actually working.
For now, this only applies to Rockchip's U-Boot proper DT but could be
applied to the kernel's as well and possibly for other architectures or
vendors.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
In commit 6e4675b8e5 ("lmb: replace the lmb_alloc() and
lmb_alloc_base() API's") an additional allocation was mistakenly
introduced resulting in ${kernel_comp_size} containing the address of a
second 64mb region rather than the actual value of KERNEL_COMP_SIZE.
Additionally, in commit b40d7b8f72 ("Merge patch series "lmb: use
a single API for all allocations"") merge conflict resulted in an
additional 128mb allocation for ${loadaddr} when CONFIG_FASTBOOT
is enabled, where it should actually be set to the same value as
${fastboot_addr_r} to respect size constraints (and since it doesn't
seem to interfer with any bootflows).
Fixup both of these, freeing up 192mb of memory.
Fixes: 6e4675b8e5 ("lmb: replace the lmb_alloc() and lmb_alloc_base() API's")
Fixes: b40d7b8f72 ("Merge patch series "lmb: use a single API for all allocations"")
Link: https://lore.kernel.org/r/20250811104710.1896382-1-casey.connolly@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
The JEDEC LPDDR3 spec defines mode register 0 (MR0) as being read-only,
so there is no point in trying to set its value.
Also the H616 memory controller encodes the mode register index to be
written starting from bit 8 in MRCTRL1 (for LPDDR3 and LPDDR4 chips), so
we need to OR in that number to tell the controller which MR to program.
On top of that, the mode registers between DDR3 and LPDDR3 are
completely different, so writing values crafted for DDR3 into a LPDDR3
chip is just wrong. Due to the above mentioned bugs the writes for
MR0-MR2 did not have any effect (as they were all trying to set the
read-only MR0), so the mode registers just stayed unchanged.
Looking at the LPDDR3 spec and the BSP code, let's write the proper MR
values into LPDDR3 chips, using the proper addressing mode.
Use the opportunity to document the LPDDR3 mode register bits written.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Recent changes in the H6 clock code added delay() calls into the SPL clock
setup routine, which requires the timers to work. When compiling for
AArch64, we are always using the Arm Generic Timer (aka. arch timer),
which does not require further setup, hence having an empty timer_init()
routine.
However for 32-bit SoCs we use the Allwinner timers, which require some
setup routine, and hence we need timer_init() to be called before
clock_init().
Swap the order of the two calls, to be more robust when compiling the H6
clock code for AArch32 or when using the Allwinner timers for whatever
reason.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Variables holding addresses are typically using the "long" C type in
U-Boot, to be easily compatible with both 32-bit and 64-bit builds.
The A133 DRAM driver is typically compiled for AArch64, so u64 is the
same type as unsigned long, but that breaks when compiling the DRAM
driver in AArch32 (for some experiments).
Fix the type to make the code more portable.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The V3s (using co-packaged DRAM) runs at 360 MHz, which is specified in
the common platform Kconfig file. However the value for MACH_SUN8I will
be picked up instead due to ordering.
Re-order the defaults to have MACH_SUN8I_V3S before MACH_SUN8I and let
it select the correct default. Also update the LicheePi Zero Dock
defconfig to remove the value, which is now correctly selected.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
There is nothing special for u-boot in the V3/V3s device-tree files,
they are just copies of the upstream ones.
Remove the copies and switch to OF_UPSTREAM for supported boards.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
This adds more common functions found on other architectures that will
allow for more compile-testing of drivers. These are either dummy
functions as we do not need them or mappings to existing functions,
similar to how other architectures handle it.
Signed-off-by: Tom Rini <trini@konsulko.com>
