In the case of !zq_en zqcs_init is never assigned to although its value
is used. Correct by initialising zqcs_init to 0.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
This commit introduces a new API,
request_firmware_into_buf_via_script(), to the fs_loader framework.
This function allows firmware to be loaded into memory using
a user-defined U-Boot script, providing greater flexibility for
firmware loading scenarios that cannot be handled by static file
paths or device/partition selection alone.
Key features:
- The API runs a specified U-Boot script (by name), which is responsible
for loading the firmware into memory by any means (e.g., load from MMC, USB, network, etc.).
- The script must set two environment variables: 'fw_addr'
(the memory address where the firmware is loaded) and
'fw_size' (the size of the firmware in bytes).
- The function validates these variables, copies the firmware into a newly
allocated buffer (using memdup), and returns the pointer
via the provided double pointer argument.
- The maximum allowed firmware size is checked to prevent buffer overflows.
- The environment variables are cleared after use to avoid stale data.
- Detailed error messages are provided for all failure conditions to aid debugging.
Usage example:
1. Define a U-Boot script in the environment that loads the firmware
and sets the required variables:
=> env set my_fw_script 'load mmc 0:1 ${loadaddr} firmware.bin &&
env set fw_addr ${loadaddr} && env set fw_size ${filesize}'
2. In your code, call the new API:
void *fw_buf = NULL;
int ret = request_firmware_into_buf_via_script(&fw_buf, 0x46000000, "my_fw_script");
if (ret < 0)
return ret;
This approach allows board integrators and users to customize the firmware
loading process without modifying the source code,
simply by changing the script in the U-Boot environment.
Signed-off-by: Lucien.Jheng <lucienzx159@gmail.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[trini: Fix printf of size_t needing to use %zx]
Signed-off-by: Tom Rini <trini@konsulko.com>
Drop SUPPORT_EXTENSION_SCAN and enable PHYTEC_SOM_DETECTION_BLOCKS
to align with other PHYTEC platforms. These options were missed when
phyCORE-AM62Ax support was added.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Use CONFIG_PHYTEC_EEPROM_BUS instead of the hard coded value for the i2c bus.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Add the option to choose a different bus number than 0 for the i2c eeprom
based som detection.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Configure RMMI and M-PHY registers for HS mode required for selection of
bit rate series A or B. If it is not a calibrated part, then switch back
to SLOWAUTO_MODE and skip all these configurations.
Implemented below sequence as per the DWC RMMI databook.
1. Override RMMI CBRATESEL with the desired rate.
2. Set TX_CFGUPDT_0 to 1'b1 for one TX_CFGCLK_0 cycle.
3. Override PHY rx_req to 1, then poll on PHY rx_ack register till it
goes 1(both lanes).
4. Override PHY rx_req to 0, then poll on PHY rx_ack register till it
goes 0(both lanes).
5. Remove PHY rx_req override(both lanes).
6. Start the LS PMC.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724044402.260149-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
The existing compatible name for U-Boot's k3 system controller driver
i.e "ti,am625-system-controller" has been added to linux[1] device-tree.
This compatible in kernel is meant for configuring the Control Module
registers (CTRL_MMR0).
However in U-Boot, the matching driver was being used to load the system
firmware on the secure M-cores by the R5 SPL and therefore must be
updated to a different compatible to avoid conflicts.
Therefore, this patch renames all references of the compatible to
"ti,am654-tisci-rproc-r5". The "-r5" is appended so as to avoid any
future conflicts since r5 specific compatibles should only be useful for
U-Boot.
[1]: 5959618631fe ("dt-bindings: mfd: ti,j721e-system-controller: Add compatible string for AM654")
https://lore.kernel.org/r/20250421214620.3770172-2-afd@ti.com
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Add rauc to bootmeths variable if BOOTMETH_RAUC is enabled.
This is setting a proper default for RAUC enabled systems.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Martin Schwan <m.schwan@phytec.de>
Since the bootmeth "rauc" is not a global boot method, do not select the
corresponding BOOTMETH_GLOBAL option.
Signed-off-by: Martin Schwan <m.schwan@phytec.de>
In zynqmp_pinconf_set if param is PIN_CFG_IOSTANDARD or
PIN_CONFIG_POWER_SOURCE and zynqmp_pm_pinctrl_get_config returns an
error then value will not be assigned to when its value is tested to be
not equal to arg. Add code to only test value not equal to arg if ret is
false.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Link: https://lore.kernel.org/r/20250807-pinctrl_misc-v1-4-eeb564a1b032@linaro.org
Signed-off-by: Michal Simek <michal.simek@amd.com>
tpm_tis_i2c_get_burstcount returns a size_t but also returns -EBUSY if
the TPM is surrently busy. As size_t is an unsigned type simply testing
for < 0 will not work so change the test for being equal to -EBUSY which
will work. Also remove the trivial comments.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
When printing the contents of an size_t variable we need to use z prefix
to the format character in order to get the correct format type
depending on 32 or 64bit-ness.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
When printing the contents of an size_t variable we need to use z prefix
to the format character in order to get the correct format type
depending on 32 or 64bit-ness.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Use GUSBCFG_FORCEHOSTMODE to detected the HOST forced mode as it is done
in the Linux driver drivers/usb/dwc2/core.c:dwc2_core_reset().
The host polling must be executed only if the current mode is host,
either due to the force HOST mode (which persists after core reset)
or the connector id pin.
The GUSBCFG_FORCEDEVMODE bits is used to force the device mode (for
example used on STM32MP1x platform) and when it is activated the DWC2 reset
failed with the trace:
"dwc2_core_reset: Waiting for GINTSTS_CURMODE_HOST timeout"
Fixes: c5d685b899 ("usb: dwc2: Unify flush and reset logic with v4.20a support")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Junhui Liu <junhui.liu@pigmoral.tech>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
When the usb node is defined dr_mode="otg" ehci_usb_phy_mode() is called
to determine the mode from status registers.
The IMX95RM does not currently define the USBNC STATUS register but it is
assumed to be an omission as the first three registers are defined.
It has been expirimentally verified that the USBNC_PHY_STATUS register
at offset 0x23C bit4 (USBNC_PHYSTATUS_ID_DIG) reads 0 when USB_ID is GND
and 1 when floating.
Use is_imx9() as this driver works for i.MX91, i.MX93 and i.MX95 and all
of these determine the role based on the USBNC_PHY_STATUS register.
Fixes: 801b5fafd3 "(usb: ehci-mx6: Add i.MX95 support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Add initial support for i.MX95 USB.30 PHY, which is similar to
the i.MX8MQ and i.MX8MP USB PHY.
The i.MX95 USB3 PHY has a Type-C Assist block (TCA) consisting of two
functional blocks (XBar assist and VBus assist) and is documented
in the i.MX95 RM Chapter 163.3.8 Type-C assist (TCA) block.
Instead of relying on an external MUX for Type-C plug orientation the
XBar can handle the flip internally.
Add initial support for i.MX95 by:
- allowing the driver to be enabled i.MX95
- resetting the XBar
- configuring the TCA in System Configuration mode (which was determined
to be necessary to enable the PHY in device-mode)
Follow-on support will need to be added to steer the XBar based on
either board design (if only one pair is brought out) or if used with a
Type-C controller.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Alice Guo <alice.guo@nxp.com>
In nanddev_init mtd and memorg are assigned values that dereference nand
but this happens before a NULL check for nand. Move the assignments
after the NULL check.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Linux features a flash_speed speed test from the mtd-utils suite, U-Boot
does not. Benchmarks are useful for speed improvement developments as
well as troubleshooting or regression testing sometimes.
Enable a benchmark option to enable this feature.
Example of output on a Nuvoton platform:
MA35D1> mtd read nor0 0x81000000 0 0x10000
Reading 65536 byte(s) at offset 0x00000000
MA35D1> mtd read.benchmark nor0 0x81000000 0 0x10000
Reading 65536 byte(s) at offset 0x00000000
Read speed: 3752kiB/s
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
bug fix MTD_OOB_AUTO to MTD_OPS_AUTO_OOB since MTD_OOB_AUTO does not exist
Fixes: dfe64e2c89 ("mtd: resync with Linux-3.7.1")
Signed-off-by: david regan <dregan@broadcom.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
