In am33xx SoC[1], enhanced capture (eCAP) supports auxiliary PWM (APWM).
This series adds the PWM driver support for the APWM feature for eCAP on
AM33xx.
eCAP HW also supports the capture mode. Currently, this driver only
supports APWM.
This is based on the Linux kernel driver -> drivers/pwm/pwm-tiecap.c
Version: v6.12
Tested on AM335x EVM[2].
[1] AM335x TRM - https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf
[2] AM335x EVM - https://www.ti.com/tool/TMDXEVM3358
Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
Varadarajan Narayanan <quic_varada@quicinc.com> says:
The qcs9100 based Ride platforms have UFS as their primary storage.
Hence add support to U-Boot env framework to be able to save and
retrieve the environment from UFS. The environment will be
saved/retrieved from the partition specified in the config option
CONFIG_SCSI_ENV_PART.
Also add an API to convert partition UUID string to block device
descriptor for UFS. This API will be used to get the block device
descriptor for the partition specified in CONFIG_SCSI_ENV_PART.
Link: https://lore.kernel.org/r/20250513091710.3719292-1-quic_varada@quicinc.com
Tom Rini <trini@konsulko.com> says:
Hey all,
This is a v3 of Simon's series[1] and depends on the series[2] I posted
the other day that removes <env.h> from <command.h>. With this series
done, I believe we've tackled all of the current cases of headers which
include <env.h> without directly needing it. Much of this series is in
fact Simon's v2 with the main differneces being:
- Removing <env.h> from <net.h> at the end
- Removing env_to_ip() given how little it's used rather than shuffling
around where it's declared and un-inline'ing it. For a rarely used
helper, this ends up being cleaner I think. Especially looking at some
of the users (which called env_get repeatedly). If there's strong
opinion here about using the other method[3] we can do that instead.
- Setting aside for now how to handle CMD_ELF=y and NO_NET=y because
today it's actually fine as we unconditionally build lib/net_utils.c
where string_to_ip() is defined. I'm unsure if a further series is
warranted here or not. We rely on link-time optimization to keep code
readable too.
[1]: https://lore.kernel.org/all/20250501010456.3930701-1-sjg@chromium.org
[2]: https://lore.kernel.org/all/20250514225002.15361-1-trini@konsulko.com
[3]: https://lore.kernel.org/all/20250501010456.3930701-23-sjg@chromium.org
Link: https://lore.kernel.org/r/20250515234154.1859366-1-trini@konsulko.com
Now that env_get_ip() has been removed, the include file <net.h> does
not need anything from <env.h>. Furthermore, include/env.h itself
includes other headers which can lead to longer indirect inclusion
paths. To prepare to remove <env.h> from <net.h> fix all of the
remaining places which had relied on this indirect inclusion to instead
include <env.h> directly.
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> # net/lwip
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Currently, we have the function env_get_ip which takes an IP address
in string form and returns a struct in_addr representation of that
address. It is however little used and means that a number of places
indirectly (and unclearly) get <env.h> via <net.h>. To clean this up
start by replacing env_get_ip() calls with string_to_ip() calls. This is
generally a no-op as env_get_ip(str) is an inline of
string_to_ip(env_get(str)) but in a few cases we can or already have
stored the result of env_get(str) and can save the additional call.
Signed-off-by: Tom Rini <trini@konsulko.com>
The include file <command.h> does not need anything from <env.h>.
Furthermore, include/env.h itself includes other headers which can lead
to longer indirect inclusion paths. To prepare to remove <env.h> from
<command.h> fix all of the places which had relied on this indirect
inclusion to instead include <env.h> directly.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org> # android, bcb
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> # spawn
Signed-off-by: Tom Rini <trini@konsulko.com>
In a number of cases we have C files which rely on a chain of indirect
include paths to get <linux/string.h> to be included via <command.h>. To
facilitate cleaning up <command.h> make this code directly include
<linux/string.h>.
Signed-off-by: Tom Rini <trini@konsulko.com>
The way we enable ULPI support today isn't something that should work.
The "optional" keyword in a choice statement is not a documented
feature. To make this work in a supported way, make USB_ULPI something
we ask about if USB_HOST is set. Next, we move the choice of what
viewer to use to be after the framework portion and to depend on that.
We then borrow a few words from the top-level README to make the help
text here clearer. Finally we make the Qualcomm driver select ULPI as
it's required and we make the tegra driver not duplicate a check that
Kconfig now handles for us.
Signed-off-by: Tom Rini <trini@konsulko.com>
The last platform to enable this driver was removed in 2019. Remove this
unused code and documentation now.
Signed-off-by: Tom Rini <trini@konsulko.com>
dwc3_core_init loops 'timeout' times to check if the IP block is out
of reset using 'while (timeout--)'. If there is some issue and
the block doesn't come out of reset, the loop will run till
'timeout' becomes zero and the post decrement operator would set
timeout to 0xffffffff. Though the IP block is not out reset, the
subsequent if check 'if !timeout' would fail as timeout is not
equal to zero and the function proceeds with the initialization.
Use poll API instead to resolve this.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Remove unnecessary CL22 phy reset before ethernet phy driver
probe. Lots of ethernet phys requires driver to load firmware.
Before that, CL22 phy reset may lead to malfunction.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Starting from commit ac30d90f33 (clk: Ensure the parent clocks are enabled
while reparenting), MediaTek filogic platforms will crash on booting when
initializing mmc devices.
The root cause is that to simplify the code, we reused the topckgen ops for
apmixedsys clocks as they share the get_rate with topckgen clocks while the
clk enable/disable ops are not available for apmixedsys clocks.
Now that a clock will be enabled first before reparenting, we have to add
dummy enable/disable ops for apmixedsys to avoid unexpected behavior when
apmixedsys clocks are the parent clock of the to-be-reparenting clocks.
Fixes: 40746bf429 (clk: mediatek: add clock driver support for MediaTek MT7981 SoC)
Fixes: 37d5a9a29d (clk: mediatek: add clock driver support for MediaTek MT7986 SoC)
Fixes: ece4e5804f (clk: mediatek: add clock driver support for MediaTek MT7987 SoC)
Fixes: 421436981a (clk: mediatek: add clock driver support for MediaTek MT7988 SoC)
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
In rare cases U-Boot returns an error message when intantiating the RNG
of the CAAM device:
“SEC0: RNG4 SH0 instantiation failed with error 0xffffffff”
This means, that even when the CAAM device reports a finished
descriptor, none is found in the output ring.
This might be caused by a missing cache invalidation before
reading the memory of the output ring
This patch moves the cache invalidation of the output ring from start of
the job to immediately after the notification from hardware where the
output ring will be read.
Signed-off-by: Olaf Baehring <olaf.baehring@draeger.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
The driver is adapted from Linux kernel's version of clk-th1520-ap.c,
with only output clocks for external sensors, which are barely useful in
bootloaders, removed.
Same as the mainline driver, it currently lacks of ability to enable and
reconfigure PLLs, which could be implemented later.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
This patch cleans the vendor code of DDR initialization up, converts the
driver to fit in DM framework and use a firmware[1] packaged by binman to
ship PHY configuration.
Currently the driver is only capable of initializing the controller to
work with dual-rank 3733MHz LPDDR4, which is shipped by 16GiB variants
of LicheePi 4A boards and I could test with. Support for other
configurations could be easily added later.
Link: https://github.com/ziyao233/th1520-firmware # [1]
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
That's how it looks like without CONFIG_MMC_SUPPORTS_TUNING before the
patch:
aarch64-buildroot-linux-gnu-ld.bfd: drivers/mmc/cv1800b_sdhci.o: in function `cv1800b_execute_tuning':
drivers/mmc/cv1800b_sdhci.c:47:(.text.cv1800b_execute_tuning+0x50): undefined reference to `mmc_send_tuning'
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
With commit cc4e8af2c5, fsl_enetc register accessors have been split to
handle different register offsets on different SoCs. However, for
internal MDIO register calculation, only ENETC_PM_IMDIO_BASE was fixed
without adding the SoC specific MAC register offset.
As a result, the network support for the Kontron SMARC-sAL28 and
probably other boards based on the LS1028A CPU is broken.
Add the SoC specific MAC register offset to calculation of imdio.priv to
fix this.
Fixes: cc4e8af2c5 ("net: fsl_enetc: Split register accessors")
Signed-off-by: Thomas Schaefer <thomas.schaefer@kontron.com>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # LS1028A
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx95_19x19_evk
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Alice Guo <alice.guo@nxp.com>
On 32-bit systems, e.g. i.mxrt-1170 fdt_addr_t may only be 32-bit.
Cast to a "long long" for garbage avoidance.
Signed-off-by: Jonathan Currier <dullfire@yahoo.com>
The commit ac30d90f33 ("clk: Ensure the parent clocks are enabled
while reparenting") add a call to clk_enable() for the parent clock.
For clock drivers that do not implement the enable() ops, like most
Rockchip clock drivers, this now cause the set_parent() ops to never
be called when CLK_CCF=n (default for Rockchip).
clk_enable() typically return -ENOSYS when the enable() ops is not
implemented by the clock driver, with CLK_CCF=y clk_enable() instead
return 0 when the enable() ops is unimplemented.
Change to ignore -ENOSYS from the newly introduced clk_enable() call to
fix this regression and restore the old behavior of set_parent() ops
being called regardless of if enable() ops is implemented or not.
Fixes: ac30d90f33 ("clk: Ensure the parent clocks are enabled while reparenting")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Dang Huynh <danct12@riseup.net>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Currently, Synopsis xgmac driver only works if DMA region is under 4GB.
This change enables the DMA buffers allocations above 4GB memory
regions.
Signed-off-by: Nikunj Kela <nikunj.kela@sima.ai>
This file was using IS_ENABLED() to test for CONFIG flags but omitted
the CONFIG_ prefix and so did not work as expected.
Signed-off-by: Tom Rini <trini@konsulko.com>
Add support for Skyworks AAT2870 LED Backlight Driver and Multiple LDO
Lighting Management Unit. Only backlight is supported as for now. Supported
backlight level range is from 2 to 255 with step of 1.
Tested-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
LG LH400WV3-SD04 is a color active matrix TFT (Thin Film Transistor)
liquid crystal display (LCD). The resolution of a 4" contains 480 x 800
pixels.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Hitachi TX10D07VM0BAA is a color active matrix TFT (Thin Film Transistor)
liquid crystal display (LCD). The resolution of a 4" contains 480 x 800
pixels.
Tested-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Add support for 8-bit CPU driven (primary and secondary) display signal
interface found in Tegra 2 and Tegra 3 SoC.
Tested-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
MAX8907 PMIC has embedded poweroff function used by some device to initiane
device power off. Implement it as optional sysreset driver guarded by
kconfig option and system-power-controller device tree property.
Tested-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Added a new regulator driver for the MAXIM MAX8907 PMIC, providing
essential regulator functionalities and incorporated the necessary binding
framework within the core PMIC driver.
Tested-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Releasing a GPIO on Tegra necessitates changing its configuration to SFIO
to activate its special function. Without this reconfiguration, the special
function will be unavailable.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Add RMII-specific handling to rk3288_gmac_fix_mac_speed() so that it
properly sets the RMII clock (2.5 MHz vs. 25 MHz) and speed bits
(10 Mbps vs. 100 Mbps). Also define a new rk3288_gmac_set_to_rmii()
function to set the PHY interface field and RMII_MODE bit.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Write enable(06h) command will be sent to a flash device to
set the write enable latch bit before every program, erase,
write command. After that write disable command (04h) needs
to be sent to clear the write enable latch.
This write_disable() is missing at the majority of the places
in the driver, add it to clear write enable latch.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://gist.github.com/PrasanthBabuMantena/c12f39744de188a9d08cd5ca51dc2a7b
Tested-by: Prasanth Babu Mantena <p-mantena@ti.com>
MT35XU512ABA has only BFPT and 4-Byte Address Instruction Table
in SFDP. commit bebdc23750 ("mtd: spi-nor: Parse SFDP SCCR Map")
added checks in spi_nor_octal_dtr_enable() to bail out if the 22nd DWORD
in SCCR does not indicate DTR Octal Mode Enable, since MT35XU512ABA device
supports octal DTR mode, add this property in SFDP fixup.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Prasanth Babu Mantena <p-mantena@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
The IO domain driver controls the I/O voltage for various pins,
MMC included.
Enable it by default for all supported Rockchip SoCs.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
There's no need to modify private data from the controller, so let's
make that struct const.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
There's no need to modify private data from the controller, so let's
make that struct const.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
There's no need to modify private data from the controller, so let's
make that struct const.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
There's no need to modify private data from the controller, so let's
make that struct const.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
