The dhcp command is supposed to have the following syntax as per
"help dhcp":
dhcp [loadAddress] [[hostIPaddr:]bootfilename]
In other words, any arguments should be passed to an implicit
tftpboot command after the DHCP exchange has occurred.
Add the missing code to the lwIP version of do_dhcp().
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
We currently provide entropy to mbedTLS using 8b chunks.
Take into account the 'len' parameter passed by MBed TLS to the entropy
gathering function instead. Note that the current code works because len
is always 128 (defined at compile time), therefore mbedtls_hardware_poll()
is called repeatedly and the buffer is filled correctly. But passing 'len'
to dm_rng_read() is both better and simpler.
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
While at the base level, this conversion looks equivalent, we now see
both of these tests failing (due to exceeding their allowed margin for
being too slow) in Azure with a very high frequency.
This reverts commit 88db4fc5fe.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The local variables ipstr, maskstr and gwstr in static function
dhcp_loop() cannot be pointers to read-only data, since they may be
written to in case the device index is > 0. Therefore make them char
arrays allocated on the stack.
Reported-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
We make fewer calls to dm_test_restore() since
commit fbdac8155c ("test: Expand implementation of ut_list_has_dm_tests()")
Because of this some valid test combinations are now broken:
$ ./test/py/test.py --bd sandbox --build -k test_ut
$ ./test/py/test.py --bd sandbox --build -k "bootflow_android or bootflow_cros"
Shows:
Expected ' 2 cros ready mmc 4 mmc5.bootdev.part_4 ',
got ' 2 cros ready mmc 2 mmc5.bootdev.part_2 '
Here prep_mmc_bootdev() is called twice and it will bind bootmeth_cros twice.
Since bootmeth_cros is bound twice, 'bootflow scan' will find 2x the
expected bootflows.
Before
commit fbdac8155c ("test: Expand implementation of ut_list_has_dm_tests()")
this did not happen because a cleanup was called each time.
Add UTF_DM and UTF_SCAN_FDT flags to both tests to make sure that the
bootmeths are unbound after the test finishes.
Fixes: fbdac8155c ("test: Expand implementation of ut_list_has_dm_tests()")
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/23474
- UFS support is enabled for SC7280 and SM8150 platforms.
- Qualcomm dt-bindings headers are all dropped in favour of
dts/upstream.
- The SMMU driver now correctly handles stream ID 0 and is disabled in
EL2.
- Initial support for capsule updates (using the new dynamic UUIDs) is
added for the RB3 Gen 2 board alongside a new SCSI backend for DFU.
- CONFIG_PINCONF is enabled in qcom_defconfig.
- The vqmmc supply is now enabled for sdcard support on boards that need
it.
- A quirk is added for reading GPIOs on the PM8550 PMIC
Some dt-binding headers mask the upstream ones which can lead to build
failures, or worse: super weird bugs, if they get out of sync.
Remove these headers so our devicetree and binding headers will both be
in sync with upstream.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
We only need to configure the SMMU when running in EL1. In EL2 the
hypervisor isn't running so peripherals can just do DMA as they wish.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
It turns out this is a very real stream ID. Who woulda thought?
Drop the 0 check on the SID, there's no reason for it to be there in the first
place.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Enable all the necessary options for capsule updates to work, as well as
a few additional EFI features.
Capsule updates themselves are only enabled for the RB3 Gen 2, since the
exact details on where to flash U-Boot (or how to handle multiple boot
methods) has not been finalised for other boards.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Qualcomm boards flash U-Boot a variety of partitions, implement support
for determining which slot U-Boot is running from, finding the correct
partition for that slot and configuring the appropriate DFU string.
Initially, we only support the RB3 Gen 2 where U-Boot is flashed to the
UEFI partition, and ignore handling of slots. In the future we will
additionally support booting U-Boot from other partitions (e.g. boot)
and correct handling for A/B.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
GPT partition tables include two bytes worth of vendor defined
attributes, per partition. ChromeOS and Qualcomm both use these (with
different encoding!) to handle A/B slot switching with a retry counter.
Expose these via the disk_partition struct so that they can be parsed by
the relevant board code.
This will be used on Qualcomm boards to determine which slot we're
booting on so that we can flash capsule updates to the correct one.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
This is extremely similar to the MMC backend, but there are some notable
differences.
Works with a DFU string like
scsi 4=u-boot-bin part 11
Where "4" is the SCSI dev number (sequential LUN across all SCSI devices)
and "11" is the partition number.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Now the Qualcomm controller and PHY drivers were accepted,
enable then in the qcom_defconfig file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
The ufsphy_v2_regs_layout is not used, drop it and fix:
phy-qcom-qmp-ufs.c:87:27: warning: ‘ufsphy_v2_regs_layout’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
The qcom_pmic code is broken for new PMICs and should be fixed,
without the QUIRK the code is broken and the GPIOs don't work
anymore on SM8550 and SM8650 platforms.
Partially revert the revert and only add the quirk on the PM8550
PMIC, making the buttons and MMC detect gpio work again.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
On earlier platforms, the vqmmc regulator was enabled by the
previous bootloader, but on the newest (SM8650) it's not
and we need vqmmc to be enabled in order to have the card
to respond.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Fastboot is very hungry when it flashes larges chunks, and 8MiB
is way too small, allocate a much bigger size like other platforms
using Fastboot.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # rb1
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
The SM8550 and SM8650 SoCs requires PINCONF to properly
setup SDC pins in order to function correctly.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
This is used by some boards in U-Boot and is a convenient way to deal
with common settings where using a Kconfig files is not desirable.
Detect #include files and process them as if they were part of the
original file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: https://source.denx.de/u-boot/custodians/u-boot-dm/-/issues/30
This code is tested by test_scan_defconfigs() but it is useful to have
some specific tests for the KconfigScanner's operation in U-Boot. Add
a test which checks that the values are obtained correctly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Moving the hw_reset function from the controller driver to
the NOR framework has caused the OSPI reset not to be triggered
in the Cadence driver's probe function. As a result, reading the
flash ID during SPI calibration is incorrect, and the
CQSPI_REG_RD_DATA_CAPTURE is set with an invalid value.This makes
it unable to read the flash ID properly.
To solve this problem, it's suggested to skip SPI calibration and
instead retrieve the read_delay directly from the device tree.
Skipping SPI calibration doesn't bring harm since there's no need
for the flash golden values stored during SPI calibration.
Instead, they are now read during the spi_nor_read_id call in the
NOR framework.
Signed-off-by: Tejas Bhumkar <tejas.arvind.bhumkar@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20241114062045.17581-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
In getvar_partition_type() we attempt to find a filesystem driver for
the partition (of the list of driver enabled in U-Boot), on failure we
return the error to fastboot and completely bail out of the operation.
However, this should not be a failure, instead we should just default to
"raw". This allows commands like "fastboot format:ext4 userdata" to work
if userdata didn't already have an ext4 partition table (or if FS_EXT4
is disabled in U-Boot), as failing to determine the current partition
type is not an error in this case.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20241113050607.1850472-1-caleb.connolly@linaro.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
ut_check_console_line() does include an assert.
Pass the result to ut_assertok().
Addresses-Coverity-ID: 514958 Error handling issues
Fixes: 7dfafcd65e ("test: unit test for hash command")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Some Kconfig symbols introduced in commit 8cb330355b ("net: introduce
alternative implementation as net/lwip/") need a full description. The
NET symbol needs one, too.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/23430
- Prepare for implementing the EFI_HTTP_PROTOCOL:
- Make wget functionality callable even if the wget command is not
built (add CONFIG_WGET symbol).
- Ensure that wget_with_dns() works the same with the old network
stack and with lwIP.
- Put server_name and port into wget_ctx.
- Integrate struct wget_info into wget code.
- Move ip_to_string to lib/net_utils.c
The function string_to_ip is already in net_utils, which is
compiled unconditionally, but ip_to_string is currently only
accessible if the legacy network stack is selected. This
commit puts ip_to_string in net_utils.c and removes it from the
legacy network code.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
