It is expected that bloblists are stored in high memory beyond 2 GiB.
We must not use int as data type for these addresses but phys_addr_t.
Fixes: f9ef9fb033 ("bloblist: Handle alignment with a void entry")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Steffen Kothe <steffen.kothe@skothe.net> says:
AM64X hereby receives support for reset reason printing during boot.
Unfortunately does the AM64X register mapping slighlty differ from
the AM62X. WDT and PORZ are not part of the reset source register, but
the mapping remains the same for all other causes.
To prevent ifdef/else constructs, I decided to follow a simple
copy/paste approach and adjusted the logic accordingly.
Link: https://lore.kernel.org/r/20250831151706.404373-1-steffen.kothe@skothe.net
Implement get_reset_reason() for AM64x to enable reporting of the reset
cause in the cpuinfo output.
Notice that the AM64x does not support dedicated reset cause bits for
WDT and PORZ as the AM62x does.
An explanation of this difference is not part of the technical reference
manual and remains unclear.
Signed-off-by: Steffen Kothe <steffen.kothe@skothe.net>
Reviewed-by: Bryan Brattlof <bb@ti.com>
AM64X SoCs use similar but not identical bit mappings like the AM62X
family.
In detail does the AM64X not support PORZ and WDT as reset caused.
Add the mapping according to the technical reference manual into the
SoC specific header.
Signed-off-by: Steffen Kothe <steffen.kothe@skothe.net>
Reviewed-by: Bryan Brattlof <bb@ti.com>
spl_start_uboot is a board overridable function that switches to falcon
boot mode on return value of 0.
Though for SPI, the falcon boot mode was being enabled on return value
of 1 which is not the correct behaviour. Therefore this patch fixes it
to the expected boot flow.
Fixes: 14509a28aa ("spl: spi: Consolidate spi_load_image_os into spl_spi_load_image")
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Make the fdt_map parameter a pointer to const, since the function only
reads the mapping table. This improves API correctness and allows maps
to live in read-only data.
No functional change intended
Signed-off-by: Bhimeswararao Matsa <bhimeswararao.matsa@gmail.com>
Unlike other K3 SoC's, am65 SoC has the capability to detect daughter
cards and automatically generate a list of white-space separated overlays
in name_overlays environment variable.
When applied during boot with get_overlay_mmc, the path to overlays with
default distribution is incorrect where path is currently: boot/dtb and
the overlays exist in boot/dtb/ti.
Fix the path in get_overlay_mmc so that overlays are automatically applied
correctly during boot time.
Signed-off-by: Judith Mendez <jm@ti.com>
Currently logic in spl_mmc_boot_mode only lookes at main devstat
to determine the bootmode to return. Thus, when using: 'eMMC boot'
as primary boot mode and 'MMCSD boot from eMMC UDA' as backup
boot mode, 'eMMC boot' is always selected. Add check for bootindex
to determine if ROM boot via backup boot mode and return MMCSD_MODE_FS
which is the only supported backup bootmode with eMMC device.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
Anshul Dalal <anshuld@ti.com> says:
On various TI's K3 platforms boot failure was observed on SPI NOR since the
commit 5609f200d0 ("arm: Kconfig: enable LTO for ARCH_K3"). This issue was
root caused to stack corruption by the 'udma_transfer' function. Where the local
variable 'paddr' of type 'dma_addr_t' was being written to as a 64-bit value
which overwrote the stack frame of the caller (dma_memcpy) as only 32-bits had
been reserved for paddr on the stack, specifically the r4 register in the frame
of dma_memcpy was being overwritten with a 0.
drivers/dma/ti/k3-udma.c:2192:
int udma_transfer(...)
{
...
dma_addr_t paddr = 0;
...
/* paddr was written to as 64-bit value here */
udma_poll_completion(uc, &paddr);
}
drivers/dma/dma-uclass.c:234:
int dma_memcpy(...)
{
dma_addr_t destination;
dma_addr_t source;
int ret;
...
/* This call resolves to udma_transfer */
ret = ops->transfer(...);
...
dma_unmap_single(destination, ...);
dma_unmap_single(...);
return ret;
}
Enabling LTO changed how gcc mapped local variables of dma_memcpy to CPU
registers, where earlier the bug was hidden since the overwritten register
'r4' was allotted to 'ret' but was allotted to 'destination' once LTO was
enabled. And since the overwritten value was 0, the bug remained undetected
as it just meant ret was 0, but having 'destination' set to 0 caused
dma_unmap_single to fail silently leading to boot failures.
The fix entails enabling DMA_ADDR_T_64BIT which changes dma_addr_t from u32 to
u64 for the R5 SPL thus reserving enough space for 'paddr' to prevent the
overflow.
Link: https://lore.kernel.org/r/20250903115207.572304-1-anshuld@ti.com
ARCH_K3 encompasses both 32 and 64-bit cores on the same SoC, though the
DMA addresses are always 64-bit in size.
With the current implementation, the R5 SPL uses a u32 for dma_addr_t
which leads to data overflow when functions such as k3_nav_*_pop_mem try
to write a 64-bit address to dma_addr_t variable.
In certain cases it leads to stack corruption which manifest as boot
failures on certain compilers, such as SPI boot on GCC 14.2 or 13.3.
Therefore this patch selects CONFIG_DMA_ADDR_T_64BIT for all ARCH_K3.
Fixes: ffcc66e8fe ("dma: ti: add driver to K3 UDMA")
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Prasanth Babu Mantena <p-mantena@ti.com>
dma_addr_t is used to store any valid DMA address which might not
necessarily be the same size as host architecture's word size. Though
various typecasts in k3's dma and usb driver expect dma_addr_t to be the
same size as the word size.
This leads the compiler to throw a "cast from pointer to integer of
different size" warning when the condition is not met, for example when
enabling CONFIG_DMA_ADDR_T_64BIT for the R5 core.
Therefore this patch fixes the typecasts by using 'uintptr_t' as an
intermediary type which is guaranteed to be the same size as void* on
the host architecture. Thus, eliminating the compiler warning.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Since commit 5fb88fa725 "env: Rename SYS_REDUNDAND_ENVIRONMENT to ENV_REDUNDANT"
the option SYS_REDUNDAND_ENVIRONMENT is no longer available and should be
renamed to ENV_REDUNDANT.
Fixes: 95f03ee65c ("env: mmc: fix offsets relative to the end of the partition")
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
QEMU allows to specify the logical block size via parameter
logical_block_size of a virtio-blk-device.
The communication channel via virtqueues remains based on 512 byte blocks
even if the logical_block_size is larger.
Consider the logical block size in the block device driver.
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Replace uint8_t/uint32_t with u8/u32 to match U-Boot style
(checkpatch PREFER_KERNEL_TYPES). No functional change.
Signed-off-by: Bhimeswararao Matsa <bhimeswararao.matsa@gmail.com>
Whereas in Linux, on ARM there is the notion of delay operations and
mdelay and udelay are not the same, here we just have udelay and mdelay
is a trivial wrapper. Tell checkpatch to not complain here.
Reported-by: Bhimeswararao Matsa <bhimeswararao.matsa@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Add maximum ext4 journal entries to Kconfig. It is necessary since the
number of journal entries is proportional to disk capacity. For example,
an ext4 4TB HDD partition could require approximately 500 entries.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Don't invoke ext4fs_deinit() in ext4fs_write() if the failure occurs
during initialization. It would result in a crash since ext4fs_init()
has already done that.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
This cannot work (unless qemu-user is registered in binfmt_misc) as the
tools will be for a different architecture.
Fixes "make cross_tools" in case CONFIG_VIDEO_LOGO is enabled.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The function is only used locally. Enabling -Wmissing-prototypes
triggers a warning. Mark it as static.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The function is only used locally. Enabling -Wmissing-prototypes
triggers a warning. Mark it as static.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The function is only used locally. Enabling -Wmissing-prototypes
triggers a warning. Mark it as static.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The function is only used locally. Enabling -Wmissing-prototypes
triggers a warning. Mark it as static.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The function is only used locally. Enabling -Wmissing-prototypes
triggers a warning. Mark it as static.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
The function is only used locally. Enabling -Wmissing-prototypes
triggers a warning. Mark it as static.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The function is only used locally. Enabling -Wmissing-prototypes
triggers a warning. Mark it as static.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The function is only used locally. Enabling -Wmissing-prototypes
triggers a warning. Mark it as static.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Replace #define<TAB> with #define<space> to be consistent in
the entire file. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Replace use of uninitialized variable with the PCI device number
in an error message as this is what we use elsewhere to derive
the PCIe port number. Use ofnode_read_pci_addr() to read the
PCI address of the node and derive the device number from that.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reported-by: Andrew Goodbody <andrew.goodbody@linaro.org>
I had trouble booting some am335x boards (both
beagleboneblack and a custom board). SPL would start just fine, and
apparently load U-Boot proper, but it would hang when jumping to
U-Boot.
While debugging, I stumbled on this memcpy() which from code
inspection very much looked to have overlapping src and dst, and
indeed a simple printf revealed
calling memcpy(0x8087bf68, 0x8087bf80, 0xf7f8)
Now, it will always be with src > dst, our memcpy()
implementations "most likely" do forward-copying, and in the end it
turned out that this wasn't the culprit after all [*].
But to avoid me or others barking up the wrong tree in the future, and
because this use of memcpy() is technically undefined, use memmove()
instead.
[*] That was 358d1cc232 ("spl: Align FDT load address"), which has
since been fixed in master but not the v2025.07 I worked of by
52caad0d14 ("ARM: Align image end to 8 bytes to fit DT alignment").
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@gmx.de>
At this time there are still major Linux distributions which by default
boot using LEGACY_IMAGE_FORMAT type scripts. Add this option to
DISTRO_DEFAULTS to ensure these platforms can still boot.
Fixes: d780965927 ("Drop the special am335x_boneblack_vboot target")
Reported-by: Sascha Silbe <sascha-pgp@silbe.org>
Tested-By: Sascha Silbe <sascha-pgp@silbe.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Initialize the actread variable to prevent undefined behavior
that can occur if the variable is used before being assigned a
value.
This will help to prevent potential issues, especially if
actread is used (e.g., read, incremented, or returned) before
being explicitly set elsewhere in the code.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
The MAX31331 was not correctly updating the seconds when
setting the time and would return the seconds previously set.
Like the MAX31343, a delay needs to be added after setting the
time. Wait one second after writing so that the date command shows the
correct time.
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Bruce Adams <bruce.adams@alliedtelesis.co.nz>
Signed-off-by: Ben Hoelker <ben.hoelker@alliedtelesis.co.nz>
Enable CONFIG_DNS for visionfive2 board target. With CONFIG_PROT_DNS_LWIP
enabled and CONFIG_CMD_DNS disabled this restores DNS functionality
displaced by LwIP DNS refactoring during the merge window.
Signed-off-by: E Shattow <e@freeshell.de>
Booting u-boot as payload with coreboot's main branch is currently broken
since commit [1] on x86 as U-boot assumes the active GDT matches what
U-Boot would have installed in start16.S.
Make no assumptions and always load the GDT when building as coreboot
payload to make sure the segment registers are actually matching the GDT.
Fixes #GP seen when booting U-Boot as coreboot payload.
1: https://review.coreboot.org/c/coreboot/+/87255
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://review.coreboot.org/c/coreboot/+/87255
Reviewed-by: Tom Rini <trini@konsulko.com>
Add a MAINTAINERS entry for the DesignWare XGMAC network driver to
ensure future patches are properly routed for review and support.
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
We now can provide a map and have the standard fdtfile variable set from
code itself. This allows for bootstd to "just work".
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
We now can provide a map and have the standard fdtfile variable set from
code itself. This allows for bootstd to "just work".
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Add omap common environment variables to .env. We retain the old-style C
environment .h files to maintain compatibility with other omap devices that
have not moved to using .env yet.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
