Add an additional search path /dtbs, this is where dtbs are installed on
postmarketOS and potentially other distros.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
A system has to support booting via the boot manager to be EBBR compliant.
See the reference to variables Boot#### in the specification.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
EFI_IGNORE_OSINDICATIONS is used to ignore OsIndications if setvariable
at runtime is not supported and allow the platform to perform capsule
updates on disk. With the recent changes boards can conditionally enable
setvariable at runtime using EFI_RT_VOLATILE_STORE.
Let's make that visible in our Kconfigs and enable EFI_IGNORE_OSINDICATIONS
when set variable at runtime is disabled.
Since EFI_RT_VOLATILE_STORE needs help from the OS to persist the
variables, allow users to ignore OsIndications even if setvariable at
runtime is enabled.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> says:
v2 changes:
* Drop sw_blink_state structure, move its necessary fields to
led_uc_plat structure.
* Add cyclic_info pointer to led_uc_plat structure. This
simplify code a lot.
* Remove cyclic function search logic. Not needed anymore.
* Fix blinking period. It was twice large.
* Other cleanups.
v3 changes:
* Adapt code to recent cyclic function changes
* Move software blinking functions to separate file
* Other small changes
v4 changes:
* Refactoring of led_set_period() function
v5 changes
* Fix compilation if CONFIG_LED_BLINK is not defined
v6 changes:
* Enable LEDST_BLINK state unconditionally.
* Function led_set_period() becomes available when CONFIG_LED_BLINK
is disabled. This makes led code simpler.
* Software blinking requires about 100 bytes of data for a led. It's
not a good idea to allocate so much memory for each supported led.
Change the code to allocate blinking data only for required leds.
The standard property
linux,default-trigger = "pattern";
used to get an effect. No blinking parameters can be set yet.
Signed-off-by: Michael Polyntsov <michael.polyntsov@iopsys.eu>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
If hardware (or driver) doesn't support leds blinking, it's
now possible to use software implementation of blinking instead.
This relies on cyclic functions.
Signed-off-by: Michael Polyntsov <michael.polyntsov@iopsys.eu>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
Changes:
* enable LEDST_BLINK state unconditionally
* function led_set_period() becomes available when CONFIG_LED_BLINK
is disabled. This makes led code simpler.
* fix cmd/led.c to work properly when LEDST_BLINK present, but
CONFIG_LED_BLINK is disabled
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
Pass CONFIG_OF_SPL_REMOVE_PROPS to binman so that it can remove
properties correctly when producing FITs for SPL phases.
Signed-off-by: Simon Glass <sjg@chromium.org>
When using FIT to load firmware builds for multiple models, the FIT must
include a common binary along with a number of devicetree blobs, one for
each model. This is the same mechanism as is used for loading an OS.
However, SPL builds do not normally use the full devicetree, but instead
a cut-down version which various nodes and properties removed.
Add a new fit,fdt-phase property to allow binman to produce these
devicetree blobs.
Signed-off-by: Simon Glass <sjg@chromium.org>
FIT allows the FDT's root-node compatible string to be placed in a
configuration node to simplify and speed up finding the best match for
booting.
Add a new property to support this.
Signed-off-by: Simon Glass <sjg@chromium.org>
In some cases the list of available FDT files is not available in an
entryarg. Provide an option to point to a directory containing them
instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
FIT provides a way to select between different devicetree blobs
depending on the model. This works fine for U-Boot proper and allows SPL
to select the correct blob for the current board at runtime. The boot
sequence (SPL->U-Boot proper) is therefore covered by the existing
feature set.
The first boot phase (typically TPL) cannot use FIT since SoC boot ROMs
don't currently support it. Therefore the TPL image must be specific to
each model it boots on.
To support booting on mulitple models, binman must therefore produce a
separate TPL image for each model, even if the images for the rest of
the phases are identical.
TPL needs to be packaged as an executable binary along with a reduced
devicetree. When multiple models are supported, a reduced devicetree
must be provided for each model.
U-Boot's build system is designed to build a single devicetree for SPL
builds, so does not support this requirement.
Add a new 'alternatives' feature to Binman, allowing it to automatically
subset a devicetree to produce the reduced devicetree for a particular
phase for each supported model. With this it is possible to produce a
separate TPL image for each of the models. The correct one can then be
loaded onto a board, along with the common FIT image(s).
Signed-off-by: Simon Glass <sjg@chromium.org>
At present the contents of an FDT (for each phase) are fixed,
determined by the build and provided to Binman as input files.
Provide a means for entry types to provide their own FDT, so that it can
be processed, if needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Binman needs the ability to run fdtgrep to prepare devicetree subsets
for use by SPL and TPL. Add a new bintool in preparation for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
This function has strange indentation. Fix it.
Fixes: 8c1fbd1f60 ("binman: ftest: Add test for u_boot_spl_pubkey_dtb")
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a comment about this entry type being expanded, to match the comment
for SPL and TPL. Drop an unwanted line in the SPL and TPL docs while
here.
Signed-off-by: Simon Glass <sjg@chromium.org>
When an entry is compressed, write the compressed contents to a file so
that it is possible to see what was produced. This aids debugging with
new images.
Signed-off-by: Simon Glass <sjg@chromium.org>
When symbol-writing does not appear to work, it can sometimes be hard to
figure out what is going on. Add some more debugging to help.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a flag to output the found list in a more user-friendly format, with
one board per line. Omit the board count.
This can be useful with grep, for example.
Signed-off-by: Simon Glass <sjg@chromium.org>
There is no particular ordering of the board list at present, since it
is generated by a multi-threaded process. Sort them by name to make it
easier to see if a particular board is present.
Signed-off-by: Simon Glass <sjg@chromium.org>
When -x is used, buildman does not show the list of boards that will be
built, since there are no terms which cause boards to be added, only
terms which cause them to be removed.
Add a special case to fix this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com>
