Video operations are not required by the Tegra Display Controller
and should therefore be removed.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
If device uses native Tegra DSI or HDMI, DC clock MUST use the same
parent as DSI/HDMI clock uses. Hence remove need in device tree
configuration and satisfy this condition by default.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Use OF graph as a main bridge/panel source, preserving
backwards compatibility with phandle implementation.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Rework existing DC driver configuration to support bridges (both external
and internal DSI and HDMI controllers) and align video devices chain logic
with Linux implementation. Additionally, this should improve communication
between DC and internal DSI/HDMI controllers.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tegra platforms feature native HDMI support. Implement a driver to enable
functionality. This driver will initially support Tegra 2 and 3, with
future extensibility.
Co-developed-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Introduce a simplified HOST1X driver, limited to the basic clock and reset
initialization of the bus.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
VPL has the same needs as TPL in situations where the stack is at the
top of SRAM. Add an option for this and implement it for arm
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that we have the same option for SPL and TPL, simplify the logic for
determining the initial stack.
Note that this changes behaviour as current SPL_STACK is a fallback for
TPL. However, that was likely unintended and can be handled with Kconfig
defaults if needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Suggested-by: Tom Rini <trini@konsulko.com>
At present there is a hex value SPL_STACK which both determines whether
SPL has its own initial stack and the hex value of that stack.
Split off the former into SPL_HAVE_INIT_STACK with SPL_STACK depending
on that and only providing the latter.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Resync defconfig files]
The most common word for features that make a platform work is to use
'HAVE_xxx'. Rename this option to match.
Update the help to use the word 'phase' rather than 'stage', since
that is the current terminology. Also clarify that, absent this setting,
the stack pointer generally comes from the value used by U-Boot proper,
rather than SPL.
Move the option just above TPL_STACK which depends on it.
Signed-off-by: Simon Glass <sjg@chromium.org>
The sc5xx machine code includes implementations of board_init and
board_early_init_f which should not be included in the base soc support
code, as they should be implemented by a board where necessary.
This removes the default empty implementations of both from mach-sc5xx.
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
The arm library includes an implementation of bss_clear that is already
called from crt0.S. This re-clearing of BSS should not be performed in
the machine code and should therefore be removed.
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Update the DDR Configurations for AM62Px SK according to the SysConfig
DDR Configuration tool for AM64x, AM625, AM623, AM62Ax, AM62Px v0.10.02.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Update the DDR Configurations for AM62Ax SK according to the SysConfig
DDR Configuration tool for AM64x, AM625, AM623, AM62Ax, AM62Px v0.10.02.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Update the DDR Configurations for AM62x LP SK according to the SysConfig
DDR Configuration tool for AM64x, AM625, AM623, AM62Ax, AM62Px v0.10.02.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Update the DDR Configurations for AM62x SK according to the SysConfig
DDR Configuration tool for AM64x, AM625, AM623, AM62Ax, AM62Px v0.10.02.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Update the DDR Configurations for AM64x EVM according to the SysConfig
DDR Configuration tool for AM64x, AM625, AM623, AM62Ax, AM62Px v0.10.02.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Updates for RPi for 2025.04:
- Copy Bluetooth device address in DT
- Keep warnings from firmware in DT, if any
- Only add frame buffer node if CONFIG_FDT_SIMPLEFB is set
- Add identifiers for the new RPi 5 series
The firmware sets local-bd-address, copy it when loading a new DT.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
The /chosen/user-warnings property is created by the RPi firmware if
there are warnings to report, keep it to make debugging easier.
For example, if the firmware config.txt contains
"dtoverlay=error-example" and that example references an undefined
symbol "&nosuchdev" the warning can be read after boot:
$ cat /proc/device-tree/chosen/user-warnings
dterror: can't find symbol 'nosuchdev'
Failed to resolve overlay 'error-example'
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
The functions fdt_simplefb_add_node and fdt_simplefb_enable_and_mem_rsv
are only available if CONFIG_FDT_SIMPLEFB is enabled.
Signed-off-by: Martin Stolpe <martin.stolpe@gmail.com>
Acked-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
The Raspberry Pi foundation have released the Raspberry
Pi 500, CM5 an CM5 lite devices so add the assoicated
revision identifers so we can detect them.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Matthias Brugger <mbrugger@suse.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/25112
- Add drivers for MFD STM32 TIMERS and STM32 PWM and enable them on stm32mp135f-dk
- Restrict _debug_uart_init() usage in STM32 serial driver
- Add support for environment in eMMC on STM32MP13xx DHCOR SoM
- Introduce DH STM32MP15xx DHSOM board specific defconfigs
- Fix CONFIG_BOOTCOUNT_ALTBOOTCMD update on DH STM32MP1 DHSOM
- Update maintainer for board stm32f746-disco
- Fix Linux cmdline for stm32f769-disco
- Cleanup in stm32f***-u-boot.dtsi and in board_late_init() by removing
legacy led and button management.
The default PCA9451 BUCK2 volt is 0.6 V for LPDDR4x VDDQ. The codes
are actually used for reworking to LPDDR4 which needs VDDQ at 1.1 V.
So remove it to avoid LPDDR4x issue.
Signed-off-by: Ye Li <ye.li@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Build the imx code singing tool from source instead of relying on the
distro to provide the tool.
Use the debian/unstable branch because the default branch is outdated.
The binary is supposed to be build with docker, work around that by selecting
the correct Makefile directly.
Also append the description and add a link to documentation.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add optional argument make_path to build_from git. The new argument
allows specifying the path to a Makefile in case it is not in the root
of the git repo.
Also adjust the corresponding test.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add optional argument git_branch to build_from_git. The new argument
allows specifying which branch of the repo to use.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Greg Malysa <malysagreg@gmail.com> says:
This series adds all of the supported peripheral drivers for the sc5xx
series of SoCs from Analog Devices and other drivers that are used by
the evaluation kits, such as a GPIO expander used by the EZLITE carrier
boards. This series passes gitlab CI tests.
Link: https://lore.kernel.org/r/20250226173150.13198-1-malysagreg@gmail.com
This adds the necessary dt-bindings and documentation to use the ADI
SC5xx pinctrl driver in a device tree. It is not yet available upstream
in the Linux kernel. Eventually, it will be moved there.
Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
