As AM57x uses overlays for display and camera interfaces, add support to
load DT overlay files to MMC boot.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
TI AM57x boards use a custom (though family common to TI boards) mechanism
for booting Linux. Add support to enable custom MMC boot as a default
option along with the distroboot approach.
Also, add supporting mmc boot environment variables which shall be used for
custom MMC boot
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Kernel commit 837833a724 ("environment: ti: Add get_fit_config command
to get FIT config string") introduced "get_fit_config" in ti_armv7_common.h
to mangle the fdtfile name when used to select a config node from the OE
made FIT image. However, the ti_armv7_common.h is common for both K3 and
AM57xx platforms. AM57xx platforms' fdtfile name does not have '/' and
"conf-" prefix so the setexpr command fails and boot hangs.
Override the get_fit_config in AM57x specific config header to get the
correct FIT config name.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
In previous commit, incoming standard passage is used by default
when initializing the bloblist, so explicitly BLOBLIST_PASSAGE is
no more needed.
Rename it as BLOBLIST_PASSAGE_MANDATORY to determine the behaviors
when an incoming transfer list does not exist or is invalid.
When it is selected, incoming standard passage is mandatory and
U-Boot will report an error when a valid incoming transfer list is
missing.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Refactor the xferlist to remove the relocating when bloblist passed
from the boot args.
Refactor bloblist init to use incoming standard passage by default
if a valid transfer list exists in the boot args.
For bloblist relocation, use the actual total size if it has a smaller
BLOBLIST_SIZE_RELOC.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Suggested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add CONFIG_BOOTCOUNT_ALTBOOTCMD so the developer is able to add
custom altbootcmd via Kconfig when they enable BOOTCOUNT. With this now
in Kconfig, we need to move it from environment files / config.h files
and in to the defconfig file.
This was done by generating u-boot-initial-env for all platforms before
the Kconfig change, to extract altbootcmd values and then again after to
compare the result.
[trini: Perform migration to defconfigs, reword commit message]
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that everything is using the new test-suite features, drop support
for running commands.
Fix a missing closing-bracket while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Fix the comment abotu 'environment' while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some suites need things to be set up before they can run. Add a way to
declare an init function using the UNIT_TEST_INIT() macro. The init
function is just like any other test, but is always placed first so that
it runs before all the other test functions in the suite.
Add an uninit function as well, to clean up after the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
Show the average duration of a test, so we can keep track of how it is
trending. Report the suite with the longest average test to encourage
people to improve it.
Add a function to update the stats based on the results from a single
suite and another to show the summary information.
Make this optional, since sandbox's SPL tests do not have a timer driver
and people may want to print results without times.
Signed-off-by: Simon Glass <sjg@chromium.org>
Show the time taken by each test suite with 'ut all' and the total time
for all suites.
Take care to remove any sandbox time-offset from the values.
Fix the comment-format on timer_test_add_offset() while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Harrison Mutai <harrison.mutai@arm.com> says:
This series of patches enhances the vexpress64 platform by enabling bloblist
support. It also introduces support for CONFIG_BLOBLIST_PASSAGE. This is
necessary to boot vexpress64 and other boards without manually specifying a
fixed address and size for the bloblist.
After this change, all the bloblist init modes are supported (i.e., fixed,
alloc, passage) and Vexpress64 boots with CONFIG_BLOBLIST_PASSAGE.
Link: https://lore.kernel.org/r/20250204175844.19890-1-harrison.mutai@arm.com
When booting into the Linux kernel with semi-hosting, use the device
tree provided by hardware unless one is provided in the current
directory.
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Add the optargs variable so that we can set optional arguments while
booting.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Heiko Schocher <hs@denx.de> says:
In linux we have the option to create the name of a led
optionally through the following properties:
- function
- color
- function-enumerator
This series adds support for parsing this properties if there
is no label property.
Link: https://lore.kernel.org/r/20250128135246.74838-1-hs@denx.de
[trini: Document name parameter in led.h]
in linux we have the option to create the name of a led
optionally through the following properties:
- function
- color
- function-enumerator
This patch adds support for parsing this properties if there
is no label property.
The led name is created in led_post_bind() and we need some
storage place for it. Currently this patch prevents to use
malloc() instead it stores the name in new member :
char name[LED_MAX_NAME_SIZE];
of struct led_uc_plat. While at it append led tests for the
new feature.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Fixes annoying warnings of the following type when built with W=1 (for
each file including fpga.h):
CC drivers/fpga/fpga.o
In file included from /mnt/data/adahl/src/u-boot/include/xilinx.h:7,
from /mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:10:
/mnt/data/adahl/src/u-boot/include/fpga.h:61:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
61 | const fpga_desc *const fpga_get_desc(int devnum);
| ^~~~~
/mnt/data/adahl/src/u-boot/include/fpga.h:81:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
81 | const fpga_desc *const fpga_validate(int devnum, const void *buf,
| ^~~~~
/mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:36:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
36 | const fpga_desc *const fpga_get_desc(int devnum)
| ^~~~~
/mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:53:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
53 | const fpga_desc *const fpga_validate(int devnum, const void *buf,
| ^~~~~
Do some type and cast cleanup on that fpga_desc type while at it.
Link: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wignored-qualifiers
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20250121162213.1477506-1-ada@thorsis.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
So far only VBE-simple is implemented in U-Boot. This supports a single
image which can be updated in situ.
It is often necessary to support two images (A and B) so that the board
is not bricked if the update is interrupted or is bad.
In some cases, a non-updatable recovery image is desirable, so that the
board can be returned to a known-good state in the event of a serious
failure.
Introduce ABrec which provides these features. It supports three
independent images and the logic to select the desired one on boot.
While we are here, fix a debug message to indicate the function it
called. Provide a maintainers entry for VBE.
Note that fwupdated only supports VBE-simple so far, but supports for
ABrec will appear in time.
Signed-off-by: Simon Glass <sjg@chromium.org>
When VBE operates within VPL it does not want the FDT to be changed.
Provide a way to disable this feature.
Move the FIT_IMAGE_TINY condition out of spl_fit_record_loadable() so
that both conditions are together. This makes the code easier to
understand.
Replace the existing fit_loaded member, which is no-longer used.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a linker symbol which can be used to mark relocation code, so it can
be collected by the linker and copied into a suitable place and executed
when needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some phases may wish to use full FIT-loading and others not, so allow
this to be controlled.
Add some debugging while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
STM32 MPU:
- Remove dt-bindings headers available in dts/upstream
- Fixes for stm32prog
- Enable CONFIG_SYS_64BIT_LBA for STM32MP15/13/25 defconfigs
- Add upport of ck_usbo_48m in pre-reloc stage for STM32MP13
- Clean env_get_location() for STM32MP1
- Fix board_get_usable_ram_top() to fix infinite loop in cache
management for STM32MP2.
- Fix ck_flexgen_08 frequency for STM32MP2
STM32 MCU:
- Tune CYCLIC_MAX_CPU_TIME_US to avoid cyclic warning for STM32F469-Disco
- Tune CYCLIC_MAX_CPU_TIME_US to avoid cyclic warning for STM32F769-Disco
Some dt-binding headers mask the upstream ones which can lead to build
failures, or worse: super weird bugs, if they get out of sync.
Remove these headers so our devicetree and binding headers will both be
in sync with upstream.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Weijie Gao <weijie.gao@mediatek.com> says:
This patch series add support for MediaTek MT7987 SoC with its reference
boards and related drivers.
This patch series add basic boot support on eMMC/SD/SPI-NOR/SPI-NAND for these
boards. The clock, pinctrl drivers and the SoC initializaton code are also
included.
Link: https://lore.kernel.org/r/cover.1737621362.git.weijie.gao@mediatek.com
This patch adds general board files based on MT7987 SoC.
MT7987 uses one mmc controller for booting from both SD and eMMC, and the
pins of mmc controller are also shared with one spi controller.
So three configs are need for these boot types:
1. mt7987_rfb_defconfig - SPI-NOR (spi2) and SPI-NAND (spi0)
2. mt7987_emmc_rfb_defconfig - eMMC + SPI-NOR (spi2)
3. mt7987_sd_rfb_defconfig - SD + SPI-NOR (spi2)
Note: spi2 also supports booting from SPI-NAND, but not the default option.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Multiple drivers copy the MDIO instance name from struct mii_phy to
struct bb_miiphy_bus, but the name field in these two structs have
different lengths, the bb_miiphy_bus one is 16 bytes, the source one
is 32 bytes. Make sure these two lengths are always synchronized, use
MDIO_NAME_LEN for both.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
It seems that every remaining system which enables BITBANGMII also
enables BITBANGMII_MULTI . Remove the BITBANGMII_MULTI symbol and
assume it is always enabled. This allows removal of a bit of legacy
code. No functional change intended.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-tpm/-/pipelines/24375
We have use cases where a previous stage boot loader doesn't have any
TPM drivers. Instead of extending the hardware PCRs it produces an
EventLog that U-Boot later replays on the hardware.
The only real example we have is TF-A, which produces the EventLog using
hashing algorithms created at compile time. This creates a problem to the
TPM since measurements need to extend all active PCR banks. Up to now
we were exiting refusing the extend measurements.
TPMs can be instructed to change their active PCR banks, as long as the
device resets immediately after a reconfiguration. This PR is adding
that functionality. U-Boot can now scan the currently active TPM PCR
banks, the ones it was compiled to support and the ones present in an
EventLog. It the reconfigures the TPM on the fly with the correct algorithms.
Add initial support for Marvell PXA1908. The SoC has 4 Cortex-A53 cores,
a GC7000UL GPU and a variety of peripheral controllers.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
bloblist_find function only returns the pointer of blob data,
which is fine for those self-describing data like FDT.
But as a common scenario, an interface is needed to retrieve both
the pointer and the size of the blob data.
Add a few ut test cases for the new api.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add PCR allocate wrapper APIs for using in tcg2 protocol.
The wrapper proceeds a PCR allocate command, followed by a
shutdown command.
A system boot is required after two commands since TPM device needs
a HW reset to activate the new algorithms config.
Also, a helper function is included to determine the new bank mask
for PCR allocation by combining the status of current active,
supported and eventlog bank masks.
A new kconfig is created. PCR allocate and system reboot only
happens when the kconfig is selected, otherwise just exit with
errors.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
TPM2_PCR_Allocate command is required to reconfigure a TPM device
to enable or disable algorithms in run-time, thus this patch introduces
the implementation of PCR allocate APIs and adds related cmd functions
for testing.
To test the feature, ensure that TPM is started up.
Run pcr_allocate command to turn on/off an algorithm, multiple calls
are supported and all changes will be cached:
`tpm2 pcr_allocate <algorithm_name> <on|off>`
Run startup command with argument 'off' to shutdown the TPM.
`tpm2 startup TPM2_SU_CLEAR off`
Reboot the board via `reset` to activate the changes.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
TPM2_shutdown command is sharing same structure and logics with
TPM2_startup, thus this patch extends the existing startup APIs and
cmd functions to support shutdown instead of created new ones.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The alignment hole caused by cmdidx in struct mmc_cmd cause strange
issues together with the peephole2 optimization on Amlogic SoCs.
Following was observed while working on SPL support for Amlogic SoCs.
sd_get_capabilities() normally issue a CMD55 followed by a CMD51.
However, on at least Amlogic S905 (Cortex-A53) and S905X3 (Cortex-A55),
CMD55 was instead followed by CMD8 (and a few reties) in SPL.
Code from the call site:
cmd.cmdidx = SD_CMD_APP_SEND_SCR; // 51
...
data.blocksize = 8;
...
err = mmc_send_cmd_retry(mmc, &cmd, &data, 3);
Running the code with MMC_TRACE enabled shows:
CMD_SEND:55
ARG 0x50480000
MMC_RSP_R1,5,6,7 0x00000920
CMD_SEND:8
ARG 0x00000000
RET -110
Removing the alignment hole by changing cmdidx from ushort to uint or
building with -fno-peephole2 flag seem to resolve this issue.
CMD_SEND:55
ARG 0x50480000
MMC_RSP_R1,5,6,7 0x00000920
CMD_SEND:51
ARG 0x00000000
MMC_RSP_R1,5,6,7 0x00000920
Same issue was observed building U-Boot with gcc 8 - 13.
Remove this alignment hole by changing cmdidx from ushort to uint.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Tom Rini <trini@konsulko.com>
Rather than setting up the global variables and then making the call,
pass them into function directly. This cleans up the code and makes it
all a bit easier to understand.
Signed-off-by: Simon Glass <sjg@chromium.org>
