When running a newer version of pylint it will complain that page_size
may be used before being assignment. Looking deeper what is going on is
that we could run in to the case where the regex we run for any of the
flash information fails but since we don't have a result, we don't check
it either. In the case of the rest of the numerical values we then have
some assignment (multiplying by some value) and so pylint doesn't
complain. Rework things to assert that each regex has a result and so
failure will stop the test and we won't have any use before assignment.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini <trini@konsulko.com> says:
A challenge we've run in to is making it easier for more people to use
various python tools that we include in the tree. Part of the problem is
that when we have a requirements.txt file, aside from the doc one we
share with the kernel, I created it using "pip freeze". And while this
might have been a best (or at least OK) practice at the time, that's no
longer the case and is why our files have so many things in them. What
this series does is create multiple files, one per project/tool and then
has CI install them as needed. There's a few places here where this
means that we update the requirements as well, but we keep a few big
things where they are currently. This is because updating them
introduces problems of their own and delaing with that would best be a
follow up series. I've put this through GitLab and Azure to make sure
everything is still going fine on both platforms.
Link: https://lore.kernel.org/r/20250205000743.949790-1-trini@konsulko.com
Use the "pipreqs" tool to re-create these files, with a few manual
corrections. We still need to include pytest-xdist which the tool does
not detect. We also for now don't upgrade most of the required tools as
that creates problems with various tests, which should be resolved
independently.
Signed-off-by: Tom Rini <trini@konsulko.com>
At present the 'ut' command handles its flags in a strange way, in that
they must come after the subcommand.
So, we must use 'ut bloblist -r2' to run the bloblist tests twice. This
is an artefact of the way tests were run, through subcommands.
It is now possible to correct this, by doing flag-processing before
running the suite.
Update the code to handle this, so that 'ut -r2 bloblist' works. Update
the 'test_suite' test to check the new arguments.
Add a sanity-check for -I while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move the logic from this function into run_suite(), on the way to having
flag parsing in the top-level 'ut' command instead of its children.
Signed-off-by: Simon Glass <sjg@chromium.org>
Enhance the ut command to accept a comma-separated list of test suites
to run. Report the summary information for these at the end.
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that everything is using the new test-suite features, drop support
for running commands.
Fix a missing closing-bracket while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
These tests run three different checks on the nodes, but the logic is
currently all in one tests.
Split the code out into three different tests, which do different setup
and then run the same checks.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Fix the comment abotu 'environment' while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use the helpers provided for this purpose, rather than different ones in
this particular test.
Leave fdt_getprop_str() alone as it seems to have more value.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move the init code into a separate function since it is quite large.
Adjust it to use unit-test functions which have become available since
the test was written.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having this condition defined separately for each suite,
bracket all options with 'if UNIT_TEST'.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some suites need things to be set up before they can run. Add a way to
declare an init function using the UNIT_TEST_INIT() macro. The init
function is just like any other test, but is always placed first so that
it runs before all the other test functions in the suite.
Add an uninit function as well, to clean up after the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
When tests are all in the same suite it is annoying to have to read all
the common text after each name. Skip this to help the user.
Signed-off-by: Simon Glass <sjg@chromium.org>
Show the average duration of a test, so we can keep track of how it is
trending. Report the suite with the longest average test to encourage
people to improve it.
Add a function to update the stats based on the results from a single
suite and another to show the summary information.
Make this optional, since sandbox's SPL tests do not have a timer driver
and people may want to print results without times.
Signed-off-by: Simon Glass <sjg@chromium.org>
Show the time taken by each test suite with 'ut all' and the total time
for all suites.
Take care to remove any sandbox time-offset from the values.
Fix the comment-format on timer_test_add_offset() while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
All tests should belong to a suite, but if there is a suite we don't
know about (e.g. not added to cmd_ut.c) then the totals will not add up.
Add a check for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
This test does not appear to use sandbox's memory-mapped I/O so there is
no need to enable it.
Even if there were a need, it should be disabled at the end of the test,
so as not to affect other tests.
Drop these lines from the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
USB tests on ext partitions can fail with the following output
test/py/tests/test_usb.py:245: in test_usb_part
'fstype usb %d:%d' % i, part_id
E TypeError: not enough arguments for format string
So add brackets around the format string arguments to prevent the
error.
Fixes: a730947974 ("test/py: usb: Distinguish b/w ext2/ext4 partitions")
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Love Kumar <love.kumar@amd.com>
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
The setexpr.s command allows to concatenate two strings.
According to the description in doc/usage/cmd/setexpr.rst the parameters
value1 and value2 can be either direct values or pointers to a
memory location holding the values.
Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values
is a direct value. $? is set to false.
* Add support for direct values in setexpr.s.
* Correct the unit test for "setexpr.s fred 0".
* Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'.
* Remove invalid memory leak tests
Link: https://lore.kernel.org/r/20250203151029.60265-1-heinrich.schuchardt@canonical.com
The setexpr.s command allows to concatenate two strings.
According to the description in doc/usage/cmd/setexpr.rst the parameters
value1 and value2 can be either direct values or pointers to a
memory location holding the values.
Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values
is a direct value. $? is set to false.
* Add support for direct values in setexpr.s.
* Correct the unit test for "setexpr.s fred 0".
* Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
env_set() frees the previous value after allocating the new value.
As the free() may merge memory chunks the available memory is not
expected to stay constant.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
env_set() frees the previous value after allocating the new value.
As the free() may merge memory chunks the available memory is not
expected to stay constant.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heiko Schocher <hs@denx.de> says:
In linux we have the option to create the name of a led
optionally through the following properties:
- function
- color
- function-enumerator
This series adds support for parsing this properties if there
is no label property.
Link: https://lore.kernel.org/r/20250128135246.74838-1-hs@denx.de
[trini: Document name parameter in led.h]
in linux we have the option to create the name of a led
optionally through the following properties:
- function
- color
- function-enumerator
This patch adds support for parsing this properties if there
is no label property.
The led name is created in led_post_bind() and we need some
storage place for it. Currently this patch prevents to use
malloc() instead it stores the name in new member :
char name[LED_MAX_NAME_SIZE];
of struct led_uc_plat. While at it append led tests for the
new feature.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Execution time varies widely with the existing tests. Provides a way to
produce a summary of the time taken for each test, along with a
histogram.
This is enabled with the --timing flag.
Enable it for sandbox in CI.
Example:
Duration : Number of tests
======== : ========================================
<1ms : 1
<8ms : 1
<20ms : # 20
<30ms : ######## 127
<50ms : ######################################## 582
<75ms : ####### 102
<100ms : ## 39
<200ms : ##### 86
<300ms : # 29
<500ms : ## 42
<750ms : # 16
<1.0s : # 15
<2.0s : # 23
<3.0s : 13
<5.0s : 9
<7.5s : 1
<10.0s : 6
<20.0s : 12
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
bloblist_find function only returns the pointer of blob data,
which is fine for those self-describing data like FDT.
But as a common scenario, an interface is needed to retrieve both
the pointer and the size of the blob data.
Add a few ut test cases for the new api.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The $loadaddr variable is a hexadecimal value, not a string, it must be
assigned using env_set_hex(). This may break follow up tests, like the
dm_test_cmd_hash_md5 in CI. To avoid any interference with other tests,
set $wgetaddr variable which is specific to this test and use it in the
test.
Fixes: 20f641987f ("test/cmd/wget.c: move net_test_wget() to the cmd test suite")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Up to now we could only use log level, category, and file for filtering.
Allow filtering on a list of functions.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This script can fail if there is no toolchain available for the board.
At present this is not handled very nicely, in that only the error
output is reported. It is much more useful to see everything, so
combine stdout and stderr and report them both.
Signed-off-by: Simon Glass <sjg@chromium.org>
The u-boot-test-getrole script runs before the normal environment
variables have been set up. This is unavoidable since the script is
providing necessary information to test.py
This means that U_BOOT_SOURCE_DIR is not set in the environment.
As a result, Labgrid uses its default source path, configured in its
environment variable. While this may happen to work, it is not correct.
Also, it causes problems when running from Gitlab, where the runner may
not have access to that source path.
Provide the required source path in U_BOOT_SOURCE_DIR so that Labgrid
does the right thing.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: bf89a8f1fc ("test: Introduce the concept of a role")
[1] https://patchwork.ozlabs.org/project/uboot/patch/20241211131858.520639-1-sjg@chromium.org/
Simon Glass <sjg@chromium.org> says:
The current method of running unit tests relies on subcommands of the
ut command. Only the code in each subcommand knows how to find the tests
related to that subcomand.
This is not ideal and we now have quite a few subcommands which do
nothing but locate the relevant tests in a linker list, then call a
common function to run them.
This series adds a list of test suites, so that these subcommands can be
removed.
An issue with 'ut all' is that it doesn't record how many tests failed
overall, so it is necessary to examine copious amounts of output to look
for failures. This series adds a new 'total' feature allow recording the
total number of failed tests.
To help with 'ut all' a new pytest is created which runs it (as well as
'ut info') and makes sure that all is well. Due to the 'ut all' failures
this does not pass, so the test is disabled for now. It is here because
it provides security against misnaming a test suite and causing it not
to run.
Future work may:
- get 'ut all' passing
- enable test_suite() in CL, to ensure that 'ut all' keeps passing
- record duration of each suite
- allow running the tests in random order to tease out dependencies
- tweak the output to remove common prefixes
- getting rid of bootstd, optee and seame 'ut' subcommands
Link: https://lore.kernel.org/r/20250120212613.516664-1-sjg@chromium.org
Rather than having the help in the longhelp, put it in the suite info
so 'ut info -s' can show it. This is tidier, particular due to the
removal of #ifdefs
This means that the help text is present in the image (although not
displayed with 'ut info -s') so the image-size increases. But with
UNIT_TEST enabled, we expect large images so this doesn't seem
important.
Signed-off-by: Simon Glass <sjg@chromium.org>
