Commit 2a7acc865b ("configs: colibri-imx8x: enable RNG support for KASLR")
enables FSL_CAAM which requires initialization in arch_misc_init().
The ARCH_MISC_INIT configuration was added to the relevant defconfig.
Commit d0ed963690 ("global: Make ARCH_MISC_INIT a selected symbol")
changed ARCH_MISC_INIT to require explicit selection by the developer.
With this change the colibri-imx8x defconfig is no longer sufficient to
enable ARCH_MISC_INIT when FSL_CAAM is selected.
Add the necessary selection to automatically enable ARCH_MISC_INIT when
FSL_CAAM is enabled on i.MX8 platforms.
Fixes: d0ed963690 ("global: Make ARCH_MISC_INIT a selected symbol")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
This board is very tight on space in SPL; in fact with my compiler it
ends up just exactly on the wrong side:
spl/u-boot-spl.bin exceeds file size limit:
limit: 0xa000 bytes
actual: 0xa014 bytes
excess: 0x14 bytes
The repeated "lookup and request" pattern in spl_board_init() suggests
a low-hanging fruit for reducing the code size. This reduces the
object size of spl/board/liebherr/btt/btt.o by 300 bytes.
I've left the lack of error handling as-is; there isn't really
anything to do if it fails, so I suppose the printfs are the best that
can be done.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
NXP i.MX SoCs are available in different temperature grades. By default,
device-tree contains only thermal trips for consumer grade parts. On the
other hand, part temp grade fuse can be used to determine thermal trip
points. We already do this in imx_tmu_bind() function. Now, factor out
this functionality to a standalone function imx_tmu_set_trips() and use
it for both cases. This fixes an issue where 'cpu-thermal' child device
would set different thermal trips than the parent 'tmu@44482000' sensor,
depending on which gets used.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
The memory size of the 0098 SKU is 8 GB instead of 16 GB.
Fix PID4 0098 Aquila iMX95 definition.
Fixes: 4c93407165 ("toradex: tdx-cfg-block: add new pid4 support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-mmc/-/pipelines/28083
- Add support for Samsung Exynos 7870 DW-MMC device
- Add support for Samsung S2MPU05 PMIC device
- Add compatible string for Exynos5250 in Exynos DW-MMC driver
- Add support for handling UHS-I voltage signaling without power-cycle
- Minor misc cleanup
Guard execute_tuning with MMC_SUPPORTS_TUNING, otherwise there will be
build failure:
drivers/mmc/exynos_dw_mmc.c:484:10: error: 'struct dm_mmc_ops' has no member
named 'execute_tuning'
.execute_tuning = exynos_dwmmc_execute_tuning,
^~~~~~~~~~~~~~
Cc: Kaustabh Chakraborty <kauschluss@disroot.org>
Acked-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reorder the SDHCI_INT_SPACE_AVAIL and SDHCI_INT_DATA_AVAIL flags in the
SDHCI_INT_DATA_MASK definition to match the bit order as defined in the
SDHCI specification and maintain consistency with the register layout.
The functional behavior remains unchanged as this only affects the
order of OR operations in the mask definition.
Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Some boards have SD card connectors where the power rail cannot be switched
off by the driver. However there are various circumstances when a card
might be re-initialized, such as after system resume, warm re-boot, or
error handling. However, a UHS card will continue to use 1.8V signaling
unless it is power cycled.
If the card has not been power cycled, it may still be using 1.8V
signaling. According to the SD spec., the Bus Speed Mode (function group 1)
bits 2 to 4 are zero if the card is initialized at 3.3V signal level. Thus
they can be used to determine if the card has already switched to 1.8V
signaling. Detect that situation and try to initialize a UHS-I (1.8V)
transfer mode.
Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Samsung S2MPU05 PMIC is used in devices with the Exynos7870 SoC, it
houses voltage regulators and an RTC module. Add support for this device
variant in the driver, which also binds the corresponding voltage
regulator driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Samsung's S2MPU05 PMIC is used by Exynos7870 SoC. It has 5 buck and 38
LDO regulators. Add support for this device variant in the driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The functions s2mps11_{buck,ldo}_mode use the s2mps11_{buck,ldo}_modes
arrays directly in order to extract the mode of a certain register.
This approach does not allow similar devices of other variants (which
may support a different set of modes) to work with the same driver.
Instead of using these arrays hardcoded, extract them from the device's
uclass platform data. Now the responsibility of setting these arrays
properly is done by functions s2mps11_{buck,ldo}_probe, by implementing
a switch-case block which can support modes of multiple variants if and
when added.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In the Linux kernel driver, all information related to LDO and BUCK
regulators are stored in descriptive arrays. This also allows multiple
variants to be supported by the same driver.
Define a struct sec_regulator_desc which holds all values required by a
regulator. Create an array of said struct containing all regulators. The
descriptors are designed to follow a style similar to what's seen in the
Linux driver, so comparing one with the other is simple.
In functions such as s2mps11_{buck,ldo}_{val,mode} these values are to
be used, make necessary modifications to pull them from the descriptors.
Since multiple variants have varying descriptors, select them from
within a switch-case block.
Functions s2mps11_{buck,ldo}_{volt2hex,hex2volt} and arrays
s2mps11_buck_{ctrl,out} are phased out as the calculations are now
hardcoded in descriptors, thusly, it reduces clutter and enhances
readability.
Two macros in s2mps11.h, S2MPS11_LDO_NUM and S2MPS11_BUCK_NUM are
removed as they are no longer being used.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
There are multiple PMICs by Samsung which are similar in architecture
(register layout, interface, etc.) and is possible to be driven by a
single driver. Variant specific code and data should be managed properly
in the driver.
And an enum which describes all supported variants. Pass the enum as the
device driver data. Introduce a switch-case block on the enum for any
variant specific code.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The probe function, s2mps11_probe() is responsible for binding its PMIC
children. The driver doesn't have any functionality directly, but has
sub-devices which are parts of the device. Therefore, this should be a
bind function. This is the case in the Samsung S5M8767 PMIC driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Exynos7870 is documented in upstream dt-schema. Add it in the U-Boot
driver.
Note that here it seems that Exynos7 DW MMC is perfectly compatible with
Exynos7870 DW MMC. It's not always true, especially in SDIO cards where
data from a 64-bit FIFO is read in two 32-bit halves [1]. Since SDIO
isn't used or implemented here, it's oblivious. But upstream's schema
considers that quirk, so that compatible is followed.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7cbe799ac10f [1]
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
SD UHS mode is already supported by the Exynos DW-MMC driver in mainline
Linux. Using that as reference, add support in the U-Boot driver.
The maximum frequency was capped to 200000000, increase it to 208000000,
which is the required frequency for UHS_SDR104, which has the highest
frequency of all UHS modes. Moreover, add UHS_CAPS to host capailities.
These changes allow both host and card to recognize support for all UHS
modes.
SDR104, SDR50, and DDR50 have their own CLKSEL timing values, which
requires the CIU div value to be set in bits 18:16. Move the function
exynos_dwmci_clksel() below exynos_dwmmc_get_ciu_div() so that the
latter is accessible from the former, and add cases for said timing
modes.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
MMC HS200 and HS400 modes are already supported by the Exynos DW-MMC
driver in mainline Linux. Using that as reference, add support in the
U-Boot driver.
The maximum frequency was capped to 50000000, increase it to 200000000,
which is the required frequency for HS200/HS400. Moreover, add
MMC_MODE_HS200 and MMC_MODE_HS400 to host capailities. These changes
allow both host and card to recognize support for HS200/HS400.
This change also includes a new ops function, namely execute_tuning.
Implementing it would mean that we can no longer rely on the default ops
provided by dw_mmc.c, thus a new ops instance is created with proper
fields. The execute_tuning function is modeled after the one available
in the Linux driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Disrupting the regulator voltage during ios configuration messes with
the MMC initialization sequence. Move the VQMMC regulator enable/disable
functions to the MMC power cycle function, similar to how its done for
the VMMC regulator.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In certain cases, the VQMMC regulator may not support certain voltages.
For instance, a VQMMC regulator which supports only up to 2.7V will not
accept 3.3V as an argument. This is unaccounted for, and thus the driver
incorrectly assumes that the voltage is set successfully.
Fetch the return value in a variable and return if it's non-zero.
(-ENOSYS is exempted as it implies that the voltage adjustment
functionality as a whole isn't supported).
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
During a voltage switch command (CMD11, opcode: SD_CMD_SWITCH_UHS18V),
certain hosts tend to stop responding to subsequent commands. This is
addressed by introducing an additional command flag,
DWMCI_CMD_VOLT_SWITCH.
The associated interrupt bit is defined as DWMCI_INTMSK_VOLTSW. This is
set high when a voltage switch is issued, this needs to be waited for
and set to low. Implement the same in the timeout loop. Do note that
since DWMCI_INTMSK_VOLTSW shares the same bit as DWMCI_INTMSK_HTO (bit
10), the interrupt bit needs to be polled for only if the volt switch
command is issued.
DWMCI_CMD_VOLT_SWITCH also needs to be set for subsequent clken commands
after the volt switch. To ensure this, add a boolean member in the host
private struct (herein named volt_switching), which informs if the last
command issued was for volt switching or not.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The current implementation polls for the DWMCI_CMD register, for the
DWMCI_CMD_START bit to turn off, which indicates that the command has
been completed. The problem with this approach is that it doesn't
address the DWMCI_INTMSK_CDONE bit in the interrupt register,
DWMCI_RINTSTS. As a result, subsequent commands result in timeout errors.
Re-implement the waiting logic by polling for said interrupt status bit
and setting it low if raised.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In dwmci_setup_bus(), if the requested frequency is equal to the current
frequency, the function is returned, assuming no changes are required in
associated registers.
On certain SD cards, skipping in such situations may result in a timeout
errors during MMC initialization. Due to the lack of documentation, the
cause is unknown, but removing said check seems to fix the issue.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
These commands are required by struct dm_mmc_ops. Any platform specific
driver may use some or all of the functions in their own ops. Make them
accessible by moving the prototype to the dwmmc.h header.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
This driver got successfully tested with an upstream device tree
and an Exynos5250. The board in question is samsung-manta
(Google Nexus 10) which we are getting ready for upstream.
For the u-boot port was just this additional compatible string needed.
Signed-off-by: Lukas Timmermann <uboot@timmermann.space>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The UART DM controller supports different channel data packing modes,
either the 4-character packing mode (where 32-bit are read/written at once)
or the single-character mode (where only a single character is read/written
at a time). The 4-character mode can be more efficient, but the
single-character mode is much easier to implement.
At the moment, serial_msm uses the 4-character mode. Since the
dm_serial_ops operate on one character at the time, the code goes through
quite some hoops in order to break this down to single characters. This
code is prone to race conditions (e.g. priv->chars_cnt is read from the
registers, then a command is issued, what if another char came in
inbetween?). It also seems to cause another subtle issue with autoboot:
Unlike the previous autoboot failures that happened when UART was
disconnected, this problem occurs when UART is connected and open in a
terminal: For EFI boot, the console size is queried in efi_console.c
query_console_serial() by sending an ANSI escape code via UART. For some
reason, with the current driver we get yet another 0x00 byte (UART break
event?) when reading the reply from serial input. Because of that, reading
the console size fails in efi_console.c, the actual reply remains in the
UART buffer, and later the boot flow aborts because it detects input after
printing a prompt.
Rather than trying to fix the issue in the current complicated approach,
switch the driver to use the single-character mode. This is simple and
straightforward to implement without race conditions:
- We write one character at a time to UARTDM_TF, as long as the TX FIFO
has space available (TX_READY). To flush the console before starting
Linux, we wait for TX_EMPTY.
- We read one character at a time from UARTDM_RF and strip off the
additional error information (assuming there is something in the
RX FIFO, as indicated by RX_READY).
In this mode, querying the serial console size works and autoboot is no
longer interrupted. The overall code is also much shorter.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Alexey Minnekhanov <alexeymin@minlexx.ru>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250908-db410c-autoboot-fixes-v2-6-316ed98e0143@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
There have been issues with autoboot on DB410c for years, where autoboot
gets interrupted by spurious input on the UART console. Back in 2021, I've
tried to fix this by inserting a delay before UART initialization, but it
has turned out this is not working reliably either.
It looks like the root cause has always been the lack of bias-pull-up,
which was causing the RX line to be floating when UART is disconnected.
The delay does not seem to be needed anymore when applying bias-pull-up,
so drop it again in favor of the proper fix.
This reverts commit ad7e967738.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Alexey Minnekhanov <alexeymin@minlexx.ru>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250908-db410c-autoboot-fixes-v2-2-316ed98e0143@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
The GPIOs on PM6350 work fine using the qcom_spmi_gpio driver and
enables the use of the Volume Up button Fairphone 4 smartphone.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Add the pm6150l regulator data found on the Qualcomm SM6350 platform.
The tables are imported from the Linux driver. The SMPS regulators were
not added now.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Add support for TLMM pin controller block (Top Level Mode Multiplexer)
on SM6350 SoC, with support for special pins.
Correct pin configuration is required for working debug UART and eMMC/SD
cards.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
