Dmitrii Sharshakov <d3dx12.xx@gmail.com> says:
Initially fix the inconsistency reported in reply to the previous
series and also make sure AArch64 images can be built with latest
Clang versions by guarding AArch32-specific options behind extra
config checks.
Tested qemu_arm_defconfig and qemu_arm64_defconfig with Clang 21,
mainline (to be 22) ce7f9f9c and also Clang 18 (for AArch64 only, as I
have not managed to build an AArch32 image with clang-18).
Link: https://lore.kernel.org/r/20251108-clang-cross-fixes-v1-0-ea6c4282844a@gmail.com
Clang cross-compilation worked when cross binutils were available
in PATH. However, when binutils are not in the PATH clang failed to
discover the assembler, falling back to host one.
Make --prefix always absolute, Clang supports this and will search for
e.g. $(prefix)-as for assembler. This makes sure user does not have to
add cross binutils to PATH for Clang build.
Fixes build for these examples (with qemu_arm(64)_defconfig):
make CC=clang-21 CROSS_COMPILE=/.../bin/arm-none-eabi-
make CC=clang-20 CROSS_COMPILE=/.../bin/aarch64-linux-gnu-
Also validated for the case when provided with cross toolchain on PATH:
PATH=/.../bin:$PATH make CC=clang-21 CROSS_COMPILE=arm-none-eabi- -j20
This patch does not affect GCC builds, and they have _not_ been
validated against regressions.
Reported-by: Tom Rini <trini@konsulko.com>
Closes: https://lore.kernel.org/u-boot/20251106221355.GZ6688@bill-the-cat/
Signed-off-by: Dmitrii Sharshakov <d3dx12.xx@gmail.com>
The last of the users of the legacy musb drivers have been
migrated so now remove the old musb stack, all users should
now be using the new musb stack if they need this functionality.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
[trini: Remove a Makefile reference that was missed in v1]
Signed-off-by: Tom Rini <trini@konsulko.com>
This patch adds creation of tifalcon.bin for the AM62a, 62p and 62x.
The contents are the same as the existing tispl.bin but A53's SPL and
the FDT have been removed as they are not needed in R5 falcon mode.
This reduces boot time since the payload size is smaller compared to the
regular tispl.bin.
tispl.bin = TFA + TEE + TIFS-STUB + A53 SPL + FDT
tifalcon.bin = TFA + TEE + TIFS-STUB
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Make sure to pass Clang flags to the KBUILD_CPPFLAGS as well, as this
variable is used for flags during compiling for target
Skipping this leads to Clang being invoked with args for target, but
without target indication, thus defaulting to host arch:
LDS u-boot.lds
clang: error: ... '-mabi=' for target 'x86_64-suse-linux'
clang: error: ... '-mno-thumb' for target 'x86_64-suse-linux'
clang: error: ... '-mno-unaligned-access' for target 'x86_64-suse-linux'
clang: error: ... '-ffixed-r9' for target 'x86_64-suse-linux'
clang: error: ... '-mno-movt' for target 'x86_64-suse-linux'
make: *** [Makefile:2345: u-boot.lds] Fehler 1
Signed-off-by: Dmitrii Sharshakov <d3dx12.xx@gmail.com>
Since the Kbuild bump to 5.1 and specifically
commit af1a993570 ("kbuild: make -r/-R effective in top Makefile for old Make versions")
the recursion rules have changed.
'make O=/output/dir/' as well as './test/py/test.py --bd sandbox --build'
is working fine but anything that recursively called the makefile was
failing e.g 'make tests', 'make qcheck' etc, which calls a bash script
that ends up calling the makefile again.
The reason is that the internal 'sub_make_done' variable of the makefile
was set after the first pass and the output dir was never evaluated
properly. Reset the variable value if we are executing any of these
tests.
Fixes: af1a993570 ("kbuild: make -r/-R effective in top Makefile for old Make versions")
Reported-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Test-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This patch is used to restore support for i.MX95 A0 silicon. To avoid
duplicating defconfig, imx95.config is added and can be shared between
imx95_a0_19x19_evk_defconfig and imx95_19x19_evk_defconfig.
container.cfg and imximage.cfg are used to created .cfgout files that
are be passed to mkimage with -n to build flash.bin. Now they have been
deleted and replaced by adding their content to properties of node which
type is nxp-imx9image under binman node.
Fixes: 9936724aa9 ("imx95_evk: Add i.MX95 B0 support")
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Tested-By: Tim Harvey <tharvey@gateworks.com> # imx95-19x19-evk (rA0)
The U-Boot environment was previously stored in the boot loader stream
using ldr, but it has been replaced by the default environment built
into the U-Boot executable or an environment on external storage
Fixes: ea3310e8aa ("Blackfin: Remove")
Signed-off-by: Philip Molloy <philip.molloy@analog.com>
Reviewed-by: Greg Malysa <malysagreg@gmail.com>
Top level Makefile starts separate "make" processes for each each
subdirectory. lib/efi_loader apps now depend on lib.a from
arch/$(ARCH)/lib if CONFIG_USE_PRIVATE_LIBGCC is enabled which creates
a race conditions since dependency from lib/efi_loader EFI apps to
arch/$(ARCH)/lib/lib.a is not explicit:
arm-poky-linux-gnueabi-ld.bfd: cannot find arch/arm/lib/lib.a: No such file or directory
make[3]: *** [scripts/Makefile.lib:512: lib/efi_loader/testapp_efi.so] Error 1
This error was seen on yocto/OE-core CI builds after u-boot 2025.07 update:
https://lists.openembedded.org/g/openembedded-core/message/220004https://autobuilder.yoctoproject.org/valkyrie/api/v2/logs/2914600/raw_inline
| rm -f lib/efi_loader/built-in.o; arm-poky-linux-gnueabi-ar cDPrsT lib/efi_loader/built-in.o lib/efi_loader/efi_bootmgr.o lib/efi_loader/efi_bootbin.o lib/efi_loader
/efi_boottime.o lib/efi_loader/efi_helper.o lib/efi_loader/efi_console.o lib/efi_loader/efi_device_path.o lib/efi_loader/efi_device_path_to_text.o lib/efi_loader/efi_device_
path_utilities.o lib/efi_loader/efi_dt_fixup.o lib/efi_loader/efi_fdt.o lib/efi_loader/efi_file.o lib/efi_loader/efi_hii.o lib/efi_loader/efi_hii_config.o lib/efi_loader/efi
_image_loader.o lib/efi_loader/efi_load_options.o lib/efi_loader/efi_memory.o lib/efi_loader/efi_root_node.o lib/efi_loader/efi_runtime.o lib/efi_loader/efi_setup.o lib/efi_
loader/efi_string.o lib/efi_loader/efi_unicode_collation.o lib/efi_loader/efi_var_common.o lib/efi_loader/efi_var_mem.o lib/efi_loader/efi_variable.o lib/efi_loader/efi_var_
file.o lib/efi_loader/efi_watchdog.o lib/efi_loader/efi_disk.o lib/efi_loader/efi_net.o lib/efi_loader/efi_smbios.o lib/efi_loader/efi_load_initrd.o lib/efi_loader/efi_confo
rmance.o
| arm-poky-linux-gnueabi-ld.bfd -nostdlib -zexecstack -znocombreloc -znorelro --no-warn-rwx-segments -L /srv/pokybuild/yocto-worker/oe-selftest-armhost/build/build-st-
3119200/tmp/work/beaglebone_yocto-poky-linux-gnueabi/u-boot/2025.07/sources/u-boot-2025.07 -T arch/arm/lib/elf_arm_efi.lds -shared -Bsymbolic -s lib/efi_loader/helloworld.o
lib/efi_loader/efi_crt0.o lib/efi_loader/efi_reloc.o lib/efi_loader/efi_freestanding.o arch/arm/lib/lib.a -o lib/efi_loader/helloworld_efi.so
| arm-poky-linux-gnueabi-ld.bfd: cannot find arch/arm/lib/lib.a: No such file or directory
| make[3]: *** [scripts/Makefile.lib:512: lib/efi_loader/helloworld_efi.so] Error 1
The different "make" processes share common scripts/Makefile.build
and scripts/Makefile.libs but since they are separate processes
the Makefile rules can't add a dependency from lib/uefi_loader targets
to arch/$(ARCH)/lib/lib.a. Or the file level dependency can be added but
then "make" produces a too sparse error message which does not mention
that one of the dependencies like arch/$(ARCH)/lib/lib.a was not found:
make[3]: *** No rule to make target 'lib/efi_loader/helloworld.efi', needed by '__build'. Stop.
Fix this dependency problem by building arch/$(ARCH)/lib before lib
if CONFIG_USE_PRIVATE_LIBGCC was enabled.
To reproduce the race condition more reliably, add a "sleep 10" delay
before linker command cmd_link_l_target with 2025.07
or to $(lib-target): target in scripts/Makefile.build with master branch
after Kbuild update.
Fixes: 43d43241d1 ("scripts/Makefile.lib: add PLATFORM_LIBGCC to efi linking")
Cc: Adriano Cordova <adrianox@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
This directory was created when U-Boot gained the ability to run as an
EFI app in 2015. Since then the EFI-loader feature has been added.
The code in lib/efi is not actually used by the loader, so the name is
confusing.
Rename the directory to efi_client to indicate that it includes files
just for U-Boot being a client of EFI, i.e. the EFI app and stub.
Signed-off-by: Simon Glass <sjg@chromium.org>
Systems that use clang may not have gcc installed. Set
HOSTCC to cc and HOSTCXX to c++ like we did before to make those
systems work again.
Fixes: 5f520875bd ("kbuild: Bump the build system to 5.1")
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Stranges errors are observed when building U-Boot master for almost any
RISC-V board, the messages are in two types, one is about duplicated
symbols,
u-boot/arch/riscv/cpu//mtrap.S:32: multiple definition of `trap_entry';
arch/riscv/cpu/mtrap.o: u-boot/arch/riscv/cpu//mtrap.S:32: first defined here
and the other is fixdep's complaint about missing dependency files,
fixdep: error opening file: arch/riscv/cpu/.mtrap.o.d: No such file or directory
fixdep: error opening file: arch/riscv/cpu//.start.o.d: No such file or directory
where the latter could only be reproduced when building parallelly.
Both the two types of errors are about files in arch/riscv/cpu, and
there's a suspicious slash character in the reported path. Looking
through RISC-V-specific Makefiles, there's only one place that may
expand to such a path,
libs-y += arch/riscv/cpu/$(CPU)/
The right hand expands to "arch/riscv/cpu//" if $(CPU) isn't defined at
the time of including. With some debug statement added to
arch/riscv/Makefile, the output proves that arch/riscv/Makefile is
included twice, once with $(CPU) undefined and once defined correctly
according to CONFIG_SYS_CPU.
Futher bisecting shows an extra include statement against
arch/$(SRCARCH)/Makefile is added in earlier bump of Kbuild system. But
the statement is evaluated before config.mk is included and definition
of $(CPU), causing objects in arch/riscv/cpu/ are built and linked twice
(once as "arch/riscv/cpu/*", and once as "arch/riscv/cpu//*"), resulting
in the error.
Let's simply remove the extra include to fix these nasty errors. For
config targets, bumping Kbuild also introduced a new include to
arch/$(SRCARCH)/Makefile, which is removed as well for consistency.
Fixes: 5f520875bd ("kbuild: Bump the build system to 5.1")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Bryan Brattlof <bb@ti.com>
Sometimes when building a platform such as imx28_btt3 we can get an
error such as:
gzip: fit-dtb.blob: warning: file timestamp out of range for gzip format
make[1]: *** [Makefile:1219: fit-dtb.blob.gz] Error 2
make[1]: *** Deleting file 'fit-dtb.blob.gz'
make: *** [Makefile:186: sub-make] Error 2
This is typically resolved by telling gzip to ignore the timestamp.
Signed-off-by: Tom Rini <trini@konsulko.com>
EXT_DTB overrides the of_list_dirs that is passed to binman during
builds. This causes binman to not find the normal DTB paths and instead
it just is able to use the path for EXT_DTB only.
Add the default of_list_dirs that is used for normal binman builds to
EXT_DTB usecase as well.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Our last sync with the kernel was 5.1. Even that was a partial one
as some patches from 4.x kernels were already missing making the
transition to a modern kbuild infeasible.
We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.
This is an attempt to sync up Makefile[.lib/.kbuild].
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call.
One of the biggest changes is get rid of partial linking entirely and
build .a archives isntead of .o.
We diaviate from the kernel on that. Instead of calling a custom script
to create the archive symbol table, we call ar with rcTP (isntead of
rcSTP) since we want a resulting archive that's sauble with the linker.
The only affected platforms are PPC ones. Unfortunately I don't have any
of them around to test, but the objdump of the resulting files --
arch/powerpc/lib/built-in.[oa] looks identical.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Also rename USE_DEFAULT_ENV_FILE to USE_ENV_DEFAULT_ENV_TEXT_FILE .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Some SoCs require a Trusted Firmware-A (TF-A) AP Trusted ROM (BL1) to
initialize the SoC before U-Boot can run properly. Add an atf-bl1 etype
so we can properly package BL1 into a final binary
Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
Backported from kernel
commit e07db28eea38 ("kbuild: fix single target build for external module")
It's worth noting that crmodverdir is empty for U-Boot.
Just backport it to make diffing easier
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Backported from kernel
commit 059bc9fc375e ("kbuild: make 'archprepare' depend on 'scripts'")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Backported from kernel
commit e00d88804814 ("kbuild: mark prepare0 as PHONY to fix external module build")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Backported from kernel
commit 156e7cbb3ef5 ("kbuild: do not overwrite .gitignore in output directory")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Backported from kernel
commit b89f25ea7892 ("kbuild: use -Werror=implicit-... instead of -Werror-implicit-..."
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Ilias Apalodimas <ilias.apalodimas@linaro.org> says:
Last time the kbuild scripts were synced with the Linux kernel was on the
4.20 release. Updating directly to 6.x makes the diff difficult to read, so
let's do the changes incrementally and bump to 5.1 first.
Since the number of commits is big, I am splitting this in multiple series.
This one includes most of the commits for Makefile.build,
Makefile.lib and some from Makefile.
commit eeb5687a7139649e ("kbuild: add -Werror=strict-prototypes flag unconditionally")
commit 3812b8c5c5d5 ("kbuild: make -r/-R effective in top Makefile for old Make versions")
commit b421b8a6cb87 ("kbuild: remove unused archmrproper")
commit 1a49b2fd8f58 ("kbuild: strip whitespace in cmd_record_mcount findstring")
commit 88110713ca9dfb ("kbuild: hardcode genksyms path and remove GENKSYMS variable")
commit 1d8001ef358 ("kbuild: generate modules.order only when CONFIG_MODULES=y")
commit 45c4372d00 ("kbuild: refactor quiet_modtag")
commit b39a691617e4 commit ("kbuild: remove redundant quiet_modtag for $(obj-m)")
commit 5439f09f488f ("kbuild: remove redundant 'set -e' from cmd_* defines")
commit e5d289100d3a ("kbuild: remove trailing semicolon from cmd_* passed to if_changed_rule")
commit 3a2429e1faf4 ("kbuild: change if_changed_rule for multi-line recipe")
commit ee3e46b7efd2 ("kbuild: refactor modversions build rules")
commit 4317ee3b6a5e ("kbuild: remove redundant 'set -e' from sub_cmd_record_mcount")
commit 392885ee82d3 ("kbuild: let fixdep directly write to .*.cmd files")
commit 898f5a009f22 ("kbuild: move archive command to scripts/Makefile.lib")
commit b79c6aa6a1f1 ("kbuild: remove unnecessary in-subshell execution")
commit afa974b77128 ("kbuild: add real-prereqs shorthand for $(filter-out FORCE,$^)")
commit ecbd10d90e94 ("kbuild: simplify rules of data compression with size appending")
commit 58156ba4468f ("kbuild: skip 'addtree' and 'flags' magic for external module build")
commit 172caf1993b7 ("kbuild: remove redundant target cleaning on failure")
commit f3fd4a3f3a38 ("kbuild: remove redundant 'set -e' from filechk_offsets")
commit a2237fec1e06 ("kbuild: Enable dtc graph_port warning by default")
commit 70523a3ce5ff ("kbuild: disable dtc simple_bus_reg warnings by default")
commit e4aca4595005 ("kbuild: de-duplicate fixdep usage")
Link: https://lore.kernel.org/r/20250520052153.307194-1-ilias.apalodimas@linaro.org
Backported from kernel
commit 3812b8c5c5d5 ("kbuild: make -r/-R effective in top Makefile for old Make versions")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
