Harsha Vardhan V M <h-vm@ti.com> says:
This patch series introduces the fuse writebuff sub-system command and
makes improvements to the existing fuse implementation by removing the
custom string functions. The patches are required to be applied in
sequence.
The series consists of the following changes:
Patch 1 removes custom string functions and replaces them with standard
string functions.
Patch 2 introduces fuse.rst documentation for fuse commands.
Patch 3 introduces the fuse writebuff sub-system command, allowing to
write a structured buffer in memory to fuses, and implementing the
necessary function calls.
Patch 4 enables the fuse sub-system in the K3 platform.
Patch 5 updates the fuse.rst documentation to include details about the
new fuse writebuff command.
These changes aim to improve the fuse sub-system by the removal of
custom string functions and the addition of the fuse writebuff
command improves fuse programming workflows by allowing to write a
structured buffer in memory to efuses.
Link: https://lore.kernel.org/r/20250319084714.335777-1-h-vm@ti.com
Add CMD_FUSE_WRITEBUFF config option to add and enable fuse writebuff
sub-system command. Add fuse_writebuff function to be invoked on
writebuff command.
Signed-off-by: Harsha Vardhan V M <h-vm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Remove custom string functions and replace them with normal string
functions. Remove the custom strtou32 and replace it with
simple_strtoul.
Signed-off-by: Harsha Vardhan V M <h-vm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
When the ACPI tables come from an earlier bootloader it is helpful to
see whether the checksums are correct or not. Add a -c flag to the
'acpi list' command to support that.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a condition for sandbox, to match that of x86, to avoid the warning
"FADT not ACPI-hardware-reduced-compliant".
Signed-off-by: Simon Glass <sjg@chromium.org>
Any 'bootable' flag in a DOS partition causes boostd to only scan
bootable partitions for that media. This can mean that extlinux.conf
files on the root disk are missed.
Put this logic behind a flag and update the documentation.
For now, the flag is enabled, to preserve the existing behaviour of
bootstd which is to ignore non-bootable partitions so long as there is
at least one bootable partition on the disk. Future work may provide a
command (or some other mechanism) to control this.
Signed-off-by: Simon Glass <sjg@chromium.org>
The MTRR registers have 64-bit values. Update the command to use 64-bit
values so that memory larger than 4GB can be handled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than repeating the same code in several places, add some
functions which can do the conversion.
Use the cpu_phys_address_size() function to obtain the physical-address
size, since it is more reliable with kvm, where the host CPU may have a
different value from the emulation CPU.
Signed-off-by: Simon Glass <sjg@chromium.org>
Marek Vasut <marex@denx.de> says:
Import exfat-fuse libexfat, add U-Boot filesystem layer porting glue
code and wire exfat support into generic filesystem support code. This
adds exfat support to U-Boot.
Fill in generic filesystem interface for mkdir and rm commands.
Make filesystem tests test the generic interface as well as exfat,
to make sure this code does not fall apart.
Link: https://github.com/relan/exfat/commits/0b41c6d3560d ("CI: bump FreeBSD to 13.1.")
Link: https://lore.kernel.org/r/20250317031418.223019-1-marex@denx.de
Add generic implementation of the 'rm' command to delete files
from filesystems using the generic filesystem API.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Add generic implementation of the 'mkdir' command to create directories
in filesystems using the generic filesystem API.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Given how LIB_RAND is handled now, we should be depending on one of the
implementations and not selecting one of them.
Signed-off-by: Tom Rini <trini@konsulko.com>
Some blkmap memory mapped devices might have to be relevant even
after U-Boot passes control to the next image as part of the platform
boot. An example of such a mapping would be an OS installer ISO image,
information for which has to be provided to the OS kernel. Use the
'preserve' attribute for such mappings. The code for adding a pmem
node to the device-tree then checks if this attribute is set, and adds
a node only for mappings which have this attribute.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Simon Glass <sjg@chromium.org> says:
This series includes some patches related to allowing read_all() to be
used with the extlinux / PXE bootmeths.
These patches were split out from the stb4 series, since it will need to
have additional patches for LWIP, to avoid breaking PXE booting when
LWIP is used.
Link: https://lore.kernel.org/r/20250306002533.2380866-1-sjg@chromium.org
Add a new netboot_run() function which can be used for simple network
operations, such as loading a file. Put the implementation in an
internal function, used by the existing code.
Place this function into the net/ code, so that it does not need the
command line to be available.
Document which network operations are supported, i.e. a limited subset,
for now.
For the one board which uses lwip, it is not quite clear how to avoid
using the cmdline interface. This will need some discussion.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move the core code for starting an netboot operation into a separate
function, so that we can (with additional work) move towards calling it
from outside the file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than setting global variables, return the size, if provided. For
tftput, use the addr argument to store the save address, to avoid adding
yet another parameter.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than updating the global, update the value of some parameters,
so the action of the function is simpler.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than updating the global, update the value of a parameter, so the
action of the function is simpler.
Signed-off-by: Simon Glass <sjg@chromium.org>
This function repeats the same code in a few places, namely setting
net_boot_file_name_explicit and copying of the filename to
net_boot_file_name
Move these two operations to the caller, with just the filename (or
NULL) returned by parse_args()
This makes things a little easier to follow.
Signed-off-by: Simon Glass <sjg@chromium.org>
This function is a bit vague as to what it does. Expand the comment a
little, to specify which args are provided and which variables are
updated.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The address of the bzImage is not recorded in the bootflow, so we cannot
actually locate the version at present. Handle this case, to avoid
showing invalid data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than holding the state in the implementation code, move it to the
command code. The state is now passed to the implementation functions
and can there (with future work) be pass in from bootstd, without going
through the commands.
Signed-off-by: Simon Glass <sjg@chromium.org>
U-Boot version command is no longer showing information about GCC and LD.
The reason is that version.h has been removed that's why CC_VERSION_STRING
and LD_VERSION_STRING are not pass.
Values are generated to generated/version_autogenerated.h which is sourced
in version.h.
Fixes: 54ecce2cbf ("version: Separate our version string from the version command")
Signed-off-by: Michal Simek <michal.simek@amd.com>
While the code was removed in commit 3766a249a3 ("fs: drop reiserfs")
this reference in the Makefile was missed. Remove it now.
Fixes: 3766a249a3 ("fs: drop reiserfs")
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Gabriel Dalimonte <gabriel.dalimonte@gmail.com> says:
This series adds support for file renaming to EFI_FILE_PROTOCOL.SetInfo().
One of the use cases for renaming in EFI is to facilitate boot loader
boot counting.
No existing filesystems in U-Boot currently include file renaming,
resulting in support for renaming at the filesystem level and a
concrete implementation for the FAT filesystem.
Link: https://lore.kernel.org/r/20250217182648.31294-1-gabriel.dalimonte@gmail.com
The implementation roughly follows the POSIX specification for
rename() [1]. The ordering of operations attempting to minimize the chance
for data loss in unexpected circumstances.
The 'mv' command was implemented as a front end for the rename operation
as that is what most users are likely familiar with in terms of behavior.
The 'FAT_RENAME' Kconfig option was added to prevent code size increase on
size-oriented builds like SPL.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
Fixed the building failures when WGET_HTTPS,NET_LWIP and MBEDTLS_LIB
are selected due to a few incorrect kconfig dependencies.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Currently, the 8-bit escapes are being used, which aren't supported by
vidconsole_escape_char. Since the current usage maps directly to the
3-bit equivalents anyway, let's use those instead.
With this change, the fetch output looks as fetching in the vidconsole
as it does over serial!
Signed-off-by: Sam Day <me@samcday.com>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Tested-by: Ferass El Hafidi <funderscore@postmarketos.org>
Judith Mendez <jm@ti.com> says:
Some K3 devices like am62x and am64x have a M4 processor in the MCU
voltage domain. This patch series introduces remoteproc M4 driver which
will be used to load firmware into and start the M4 remote core.
This series also adds support for R5F cores on am64x SoCs in patch 2 and
sets up environment to load FW in remote cores in patch 3,4,5.
This patch series also enables remoteproc drivers by default as per what
remoteproc sybsystem is supported per SoC, thus all remoteproc options
are now deleted in configs/* since they are no longer required.
This patch series was tested on am64x EVM, am62x SK, am62ax SK,
am62px SK boards.
Any additional tested by's are welcome since I was not able to
test any additional boards.
Tested by running the following commands in u-boot prompt:
=> setenv dorprocboot 1
=> run boot_rprocs
Link: https://lore.kernel.org/r/20250210202944.1071931-1-jm@ti.com
Enable CMD_REMOTEPROC by default if building for K3 ARCH so
that it does not have to be defined in each board defconfig
file.
Signed-off-by: Judith Mendez <jm@ti.com>
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
The setexpr.s command allows to concatenate two strings.
According to the description in doc/usage/cmd/setexpr.rst the parameters
value1 and value2 can be either direct values or pointers to a
memory location holding the values.
Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values
is a direct value. $? is set to false.
* Add support for direct values in setexpr.s.
* Correct the unit test for "setexpr.s fred 0".
* Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'.
* Remove invalid memory leak tests
Link: https://lore.kernel.org/r/20250203151029.60265-1-heinrich.schuchardt@canonical.com
The setexpr.s command allows to concatenate two strings.
According to the description in doc/usage/cmd/setexpr.rst the parameters
value1 and value2 can be either direct values or pointers to a
memory location holding the values.
Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values
is a direct value. $? is set to false.
* Add support for direct values in setexpr.s.
* Correct the unit test for "setexpr.s fred 0".
* Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
