In case board is booted from USB, enter fastboot by default to enable
the UUU flashing. In case of abort continue with the regular bootstd
scan. User also has possibility to override the default bootcmd from
the environment. Last but not least, this syncs behavior with other
PHYTEC boards from the i.MX family.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Benjamin Hahn <B.Hahn@phytec.de>
When booting from eMMC, there is error log:
MMC: FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... MMC: no card present
Add board_mmc_get_env_dev() to get the correct device number.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Both the two boards have clk framework enabled, so rely on serial driver
calling clk_enable to enable the uart clk.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Enable SPL_CLK_IMX8M to make sure clk_enable could work proper in SPL
phase by using clock framework driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add a test calling the LoadImage() UEFI function with both its SourceBuffer
and DevicePath input arguments equal to NULL.
This test can be run on the sandbox with the following command:
./u-boot -T -c "setenv efi_selftest load image from file; \
bootefi selftest"
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
With the change to regularize the usage of TEST_PY_TEST_SPEC in the
sjg-lab stanza with commit c7f360f20d ("Gitlab: Rework sjg-lab calling
test.py to be closer to test.py stage") the leading "and " part of the
usage under qemu-x86_64 wasn't removed when it should have been. Do so
now.
Fixes: c7f360f20d ("Gitlab: Rework sjg-lab calling test.py to be closer to test.py stage")
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Similar to pinctrl_select_state(), add dev_has_ofnode() check before doing the
real work. Device(scmi_base.0) does not have a real device node, ofnode_null()
is assigned as the device tree node for scmi base protocol device:
'commit 7eb4eb541c ("firmware: scmi: install base protocol to SCMI agent")'
However with recent update in
'commit 0535e46d55 ("scripts/dtc: Update to upstream version v1.7.2-35-g52f07dcca47c")',
SPL panic in fdt_check_node_offset_()->fdt_next_tag(), because offset is -1
and SPL_OF_LIBFDT_ASSUME_MASK is 0xFF.
So need to validate device tree node.
Reported-by: Ye Li <ye.li@nxp.com>
Closes: https://lore.kernel.org/u-boot/939a9696-27fa-45a1-b428-feffe21ac6d5@oss.nxp.com/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Similar to pinctrl_select_state(), add dev_has_ofnode() check before doing the
real work. Device(scmi_base.0) does not have a real device node, ofnode_null()
is assigned as the device tree node for scmi base protocol device:
'commit 7eb4eb541c ("firmware: scmi: install base protocol to SCMI agent")'
However with recent update in
'commit 0535e46d55 ("scripts/dtc: Update to upstream version v1.7.2-35-g52f07dcca47c")',
SPL panic in fdt_check_node_offset_()->fdt_next_tag(), because offset is -1
and SPL_OF_LIBFDT_ASSUME_MASK is 0xFF.
So need to validate device tree node.
Reported-by: Ye Li <ye.li@nxp.com>
Closes: https://lore.kernel.org/u-boot/939a9696-27fa-45a1-b428-feffe21ac6d5@oss.nxp.com/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
SCMI base protocol device does not have a device tree, it should use and
need to use the agent base channel.
For scmi_base.[x], there is no real device tree node for it. ofnode_null() is
assigned as the device tree node for scmi base protocol device:
commit 7eb4eb541c ("firmware: scmi: install base protocol to SCMI agent")
However with recent update in commit 0535e46d55
("scripts/dtc: Update to upstream version v1.7.2-35-g52f07dcca47c"),
SPL panic in fdt_check_node_offset_()->fdt_next_tag(), because offset is -1
and SPL_OF_LIBFDT_ASSUME_MASK is 0xFF.
So add a check in x_get_channel() to validate the protocol devices'
ofnode.
Reported-by: Ye Li <ye.li@nxp.com>
Closes: https://lore.kernel.org/u-boot/939a9696-27fa-45a1-b428-feffe21ac6d5@oss.nxp.com/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Symbol CONFIG_SPL_DM_REGULATOR_FAN53555 is selected by
SPL_DM_PMIC_FAN53555 and used in a Makefile. But the
symbol definition is missing.
Add the missing configuration symbol.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Enable PMIC and regulators on MT8365 EVK now that there are drivers for
these. Also enable the associated commands.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add support for the PMIC wrapper (pwrap) IP block found on MediaTek
MT8365 and similar SoCs.
On these SoCs the PMIC is connected via SPI. The SPI controller is not
directly visible to the CPU, but only through the PMIC wrapper inside
the SoC.
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Co-developed-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add a new regulator driver for MT6359P and similar PMIC chips.
The MT6359P is a eco version for MT6359 regulator. For the MT8391
platform, we use the MT6359P (MT6365) as the main PMIC. The MT6359 and
MT6359P have different register maps. Therefore, on the MT8391 platform,
we only provide support for the MT6359P. If support for the MT6359 PMIC
it can be added later.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The Name: line of 'mmc info' command prints a trailing space before
newline. This is not useful and shows up as trailing space e.g. when
the output is checked into documentation. Remove the trailing space.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add a default fallback device tree in order to allow a successful build
without mentioning the DEVICE_TREE= make flag.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Add support for EFI capsule updates via U-Boot's DFU. This flashes the
boot partition with the new image provided in the capsule.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Some distributions tend to provide a single combined image with EFS and
the system root filesystem. Flashing it as-is in a single partition
(usually done in userdata partition as it is the largest) is not
bootable as U-Boot does not understand subpartitions.
Use blkmap to map the userdata partition into its own block device.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
The USB PHY used by the Exynos7870 SoC has a single USB 2.0 interface.
Add its dedicated variant enum, compatible, and init/exit functions.
The PHY enable bit of Exynos7870's PHY is different in contrast to that
of Exynos850 and most Exynos PHYs. To allow this change, a simple if
condition is added in exynos_usbdrd_phy_isol() which changes the
bitmask. Since the variant enum is required, the function argument is
changed to accept the driver data itself.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
The variant enum is used to uniquely identify which SoC the PHY block
belongs to. It is initially set in the match table, along with the
compatible string, it gets copied to driver data struct during probe.
SoC specific functions must only be called if the respective variant
enum is set. Add switch-case blocks wherever required.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Peripheral holding CID0 cannot be accessed, remove this completely
incorrect check. While there, fix and simplify the semaphore checking
that should be performed when the CID filtering is enabled.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
If the CID filtering is enabled, the semaphore mode is disabled as well.
To avoid an incorrect behavior and error trace, add a check of CID
filtering state before acquiring the semaphore.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Update stm32key to support stm32mp21 OTP mapping.
Create a new list of key to support the following differences :
- STM32MP21x SoC support 128b and 25b FSBL encryption keys.
- OEM-KEY1 and OEM-KEY2 used for authentication are in different OTP
from STM32MP25 and STM32MP23.
stm32key is compatible with platform STM32MP2 (aarch64)
Hence, use unsigned long to handle argument addr of function
read_key_value() instead of u32.
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
syscon_get_first_range()'s return value is used as base address to perform
a read, without any checks.
In case stmp32mp_syscon is not binded, syscon_get_first_range() returns
-ENODEV which leads to a "Synchronous abort".
Add syscon_get_first_range() check on return value.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
syscon_get_first_range()'s return value is used as base address to perform
a read, without any checks.
In case stmp32mp_syscon is not binded, syscon_get_first_range() returns
-ENODEV which leads to a "Synchronous abort".
Add syscon_get_first_range() check on return value.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Same code is duplicated into stm32mp25x.c, stm32mp23x.c and stm32mp21x.c.
Migrate read_deviceid(), get_cpu_dev(), get_cpu_rev(), get_cpu_type() and
get_cpu_package() into new stm32mp2x.c.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
STM32MP21 application processors (STM32 MPUs) based on a single
Arm Cortex®-A35 core running up to 1.5 GHz and Cortex®-M33 core
running at 300 MHz.
It is pin-compatible with the STM32MP2 series in the VFBGA361
10×10 mm package: the STM32MP21 uses a subset of the STM32MP23
pinout, which itself is a subset of the STM32MP25.
More details available here :
https://www.st.com/en/microcontrollers-microprocessors/stm32mp2-series.html
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
boot_get_fdt_fit_into_buffer() calls fdt_open_into() for both the
base FDT and overlay DTO blobs loaded from a FIT image.
Those blobs come from FIT payload data. In the overlay path,
fit_image_load() is called with FIT_LOAD_IGNORED, so the IH_TYPE_FLATDT
header check in fit_image_load() is skipped. This leaves fdt_open_into()
to consume header-derived offsets/sizes from unvalidated input.
Validate the full blob against the payload length first with
fdt_check_full(fdtsrcbuf, srclen), then proceed with fdt_totalsize() and
fdt_open_into(). This fixes Coverity CID 644638 (TAINTED_SCALAR).
Fixes: 5ebf0c55a2 ("image: fit: Apply overlays using aligned writable FDT copies")
Link: https://lore.kernel.org/all/20260223195109.GG3233182@bill-the-cat/
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
commit ba20b2443c ("arm: mach-k3: common: Reserve video memory from
end of the RAM") switched spl_enable_cache() to use gd->ram_top directly
but omitted the board_get_usable_ram_top() call that limits RAM
configuration and provides updated RAM end address per memory map
used by board and impacts subsequent allocations and reservations.
For e.g. here it impacts how high the TLB may be placed.
On Verdin AM62 (512 MiB), the raw end of RAM (0xA0000000) is inside
OP-TEE's region. board_get_usable_ram_top() in verdin-am62.c returns
0x9C000000 to keep relocations below it, but spl_enable_cache() never
called it. commit 42b3ee7fa5 ("arm: mach-k3: am62x: Enable memory
firewall support") then enforced the OP-TEE firewall, turning the silent
corruption into a hard hang.
Fix by calling board_get_usable_ram_top() after computing raw ram_top,
consistent with setup_dest_addr() in board_f.c. A weak default is
provided for boards that do not need to restrict the RAM top.
Fixes: ba20b2443c ("arm: mach-k3: common: Reserve video memory from end of the RAM")
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Link: https://lore.kernel.org/all/20260224102121.GB340942@francesco-nb/
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Verdin AM62 512MB
Commit 9ebdbbc43e ("arm: armv8: invalidate dcache entries on
dcache_enable") broke Apple Silicon machines in certain scenarios.
If the MMU is currently not enabled we need to flush the TLB
before we enable it to prevent stale TLB entries from becoming
active again. So move the __asm_invalidate_tlb_all() back
immediately before the mmu_setup() call.
Fixes: 9ebdbbc43e ("arm: armv8: invalidate dcache entries on dcache_enable")
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
