Cdns core driver also get dr mode from wrapper devcie dts node
to make it is same with Starfive cdns USB Linux kernel driver,
Starfive 7110 OF_UPSTREAM is enabled
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Add Starfive JH7110 PCIe 2.0 PHY driver, which is generic
PHY driver and can be used as USB 3.0 driver.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Tested-by: E Shattow <lucent@gmail.com>
USB PHY maybe need to set PHY mode in different USB
dr mode. So translate USB PHY mode to generic PHY mode
and call generic_phy_set_mode().
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Marek Vasut <marex@denx.de>
If 'oob_required' is not set by the caller (for example 'oobbuf' is NULL),
then driver doesn't copy OOB data from 'oob_poi' to special controller
structures, so zeroes will be written as OOB. But, generic raw NAND logic
in 'nand_base.c' already handles case when OOB is not required to write by
filling 'oob_poi' with 0xFF's. So let's remove 'oob_required' check to
always read 'oob_poi' data for OOB.
Kernel driver (drivers/mtd/nand/raw/meson_nand.c) works in the same way,
so need to keep same behaviour here.
Fixes: c2e8c4d09a ("mtd: rawnand: Meson NAND controller support")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Add SYS_NAND_PAGE_SIZE dependency for cadence NAND.
This config is needed as the SPL driver will use this parameter
to read uboot-proper image in NAND during booting.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Add support for spl nand to load binary image from NAND
to RAM. Leverage the existing nand_spl_load_image from nand_spl_loaders.c
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Enable nand to use bounce buffer. In bounce buffer,
read/write buf will use cadence->buf which has been allocated
using malloc. This will align the memory and avoid memory to be
allocated in different addresses.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Poll for thread complete status to ensure the
descriptor processing is complete. If complete then can ensure
controller already update the descriptor status.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Ensure ddr memory is updated with the data from dcache.
This would help to ensure cdma always reading the latest dma descriptor
from ddr memory.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Support NAND_CMD_SET_FEATURES & NAND_CMD_GET_FEATURES.
These commands is one of the basic commands of NAND. The parameters get
from these commands will be used to set timing mode
of NAND data interface.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Add support for reading param page of NAND device.
These paramaters are unique and used for identification purpose.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Add support for readid command in Cadence NAND driver.
The id is unique and used for flash identification.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Add support for read status command
in Cadence NAND driver. This status bit is important to check
whether the flash is write-protected.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Enable driver for Cadence NAND for the family
device agilex5. This driver is leveraged from the path
/drivers/mtd/nand/raw/cadence-nand-controller.c from the
stable version 6.11.2.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
The configuration options CONFIG_VIDCONSOLE_AS_LCD and CONFIG_VIDCONSOLE_AS_
NAME have been marked as obsolete and scheduled for deletion in late 2020.
That's already long overdue and the last remaining consumers of these options
have already migrated to using "vidconsole" in their "stdout" and "stderr"
environment variables, so let's delete these two configuration options.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Soeren Moch <smoch@web.de> # tbs2910
Driver uses dev_get_priv() but never allocates it in its
declaration leading to various crashes. Fix this by explicitly
allocating the storage.
Fixes: 9b0b5648d6 ("memory: Add TI GPMC driver")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
This patch provides a driver for i.MX Messaging Unit (MU) using the
commom mailbox framework.
This is ported from Linux (v6.12.8) driver
drivers/mailbox/imx-mailbox.c. Its commit SHA is:
39d7d6177f0c ("mailbox: imx: use device name in interrupt name")
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
The flag for enabling the ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE quirk can be
handled easily enough in Kconfig. This lets us remove a function but not
obviously correct usage of the IS_ENABLED() macro.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/25112
- Add drivers for MFD STM32 TIMERS and STM32 PWM and enable them on stm32mp135f-dk
- Restrict _debug_uart_init() usage in STM32 serial driver
- Add support for environment in eMMC on STM32MP13xx DHCOR SoM
- Introduce DH STM32MP15xx DHSOM board specific defconfigs
- Fix CONFIG_BOOTCOUNT_ALTBOOTCMD update on DH STM32MP1 DHSOM
- Update maintainer for board stm32f746-disco
- Fix Linux cmdline for stm32f769-disco
- Cleanup in stm32f***-u-boot.dtsi and in board_late_init() by removing
legacy led and button management.
Greg Malysa <malysagreg@gmail.com> says:
This series adds all of the supported peripheral drivers for the sc5xx
series of SoCs from Analog Devices and other drivers that are used by
the evaluation kits, such as a GPIO expander used by the EZLITE carrier
boards. This series passes gitlab CI tests.
Link: https://lore.kernel.org/r/20250226173150.13198-1-malysagreg@gmail.com
Legacy PCI devices, like qemu's Bochs VGA device, are allowed to have
prefetchable 32-bit BARs, while PCIe devices are not allowed to have
32-bit prefetchable BARs. Typically prefetchable BARs are 64-bit and
typically the prefetch MMIO window is also 64-bit and placed above
4GiB, as it's the case on qemu sbsa-ref.
Currently the U-Boot code assumes that prefetchable BARs are
64-bit BARs and always tries to assign them into the prefetch
MMIO window.
When a 32-bit BAR is marked as prefetch, but the prefetch area is
not within the first 4GiB of the address space, then downgrade the
BAR and place it in the non-prefetch MMIO window.
For prefetch BARs there's no downside on being placed in non prefetch
MMIO areas, besides the possible slower performance when a driver tries
to map it Write-Combine.
TEST: Fixes pci_auto on QEMU sbsa-ref fails to autoconfigure BAR0.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Since commit 948da7773e ("arm: Add new config option ARCH_VERY_EARLY_INIT")
debug_uart_init() is called respectively in crt0.S and crt0_64.S.
That means that _debug_uart_init() is called for all STM32MP platforms
even for those which doesn't support SPL_BUILD.
So restrict _debug_uart_init() execution for platforms which can have
SPL_BUILD enabled (STM32MP1 platform only).
It's more needed to call debug_uart_init() in stm32mp1/cpu.c.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Add driver to support pwm on STM32MP1X SoCs. The PWM signal is generated
using a multifuntion timer which provide a pwm feature. Clock rate and
addresses are retrieved from the multifunction timer driver.
Signed-off-by: Cheick Traore <cheick.traore@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The value written to the RFLR register includes the length of the CRC
data at the end of each Ethernet frame. So we need to increase the value
written to this register to ensure that we can receive full size frames.
While we're here we can also copy the improved comment from the Linux
kernel.
Fixes: 8ae51b6f32 ("net: ravb: Add Renesas Ethernet RAVB driver")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Fix comment
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Following on from commit 9a699a0a0d ("clk: rzg2l: Ignore enable for
core clocks"), we also need to ignore attempts to disable core clocks to
avoid the need for conditionals around clk_disable_bulk() calls in
drivers which support both RZ/G2L and other Renesas SoCs.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
These functions are no longer necessary, remove them.
The struct bb_miiphy_bus is no longer necessary either,
remove it as well.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
