Use preload_check_sign to authenticate the generated image when testing the
preload signature in testPreLoad().
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
pre-load related config options are enabled to have support of it in host
tools.
'CONFIG_FIT_SIGNATURE=y' is being automatically removed since it is
selected by CONFIG_IMAGE_PRE_LOAD_SIG.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
preload_check_sign is added so that it can be used to authenticate images
signed with the pre-load signature supported by binman and U-Boot.
It could also be used to test the signature in binman tests signing
images with the pre-load.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Add an empty inline declaration when compiling tools for a host where
unmap_sysmem() is not defined.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
rsa_verify_openssl() is used in lib/rsa/rsa-verify.c to authenticate data
when building host tools.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Baocheng Su <baocheng.su@siemens.com> says:
This introduces a sysinfo driver which also permits SMBIOS support.
The first 10 patches of v2 have already been applied. The remaining is
solely the sysinfo driver. To maintain consistency and ease of searching
through the history, the series title remains unchanged.
Link: https://lore.kernel.org/r/20250218023614.52574-1-baocheng.su@siemens.com
Drop the info structure parsing of the board in favor of our new sysinfo
driver to avoid code duplication.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
[Jan: rebasing, split-up, cleanup]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This brings a sysinfo driver and DT entry for the IOT2050 board series.
It translates the board information passed from SE-Boot to SPL into
values that can be retrieved via the sysinfo API. Will is already used
to fill the SMBIOS table when booting via EFI.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
[Jan: split-off as separate patch, cleanup]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Add a new field SYSID_BOARD_RAM_SIZE_MB to sysinfo structure to store
the size of RAM in MB. dram_init can use this field to get the RAM size
via sysinfo driver.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
This commit introduces a new API to the sysinfo module, allowing access
to data elements. This is particularly useful for handling data with
multiple instances, such as MAC addresses.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
During dma memcpy, bcdma descriptor gets allocated for each
transaction and not freed after completion of that transaction.
So, avoid the memory allocation for every transaction.
Add one descriptor per dma device and allocate it once in
resource setup. This descriptor can now be used for all
dma memcpy transactions optimally.
Signed-off-by: Prasanth Babu Mantena <p-mantena@ti.com>
serial_out_dynamic() takes a u8* addr and uses it for 8-bit or 32-bit
accesses, depending on the value of plat->reg_width. This results in a
pointer type mismatch that the compiler may even turn into an error:
drivers/serial/ns16550.c: In function ‘serial_out_dynamic’:
drivers/serial/ns16550.c:115:42: error: passing argument 1 of ‘out_be32’ from incompatible pointer type [-Wincompatible-pointer-types]
115 | out_be32(addr, value);
| ^~~~
| |
| u8 * {aka unsigned char *}
This error was observed on PowerPC.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
If there is an unallocated memory area before the last, filling parting
the size calculation for MTD_SIZE_REMAINING does not take this hole
into account.
Fix this by calculating the remaining size just based on total size
and partition offset.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Rename the variants of env_mmc_load() for redundant and non-redundant
environment to env_mmc_load_redundant() and env_mmc_load_singular()
respectively and convert the env_mmc_load() implementation to use of
if (IS_ENABLED(...)). As a result, drop __maybe_unused from
mmc_env_is_redundant_in_both_boot_hwparts().
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Introduce a new function mmc_env_is_redundant_in_both_boot_hwparts()
which replaces IS_ENABLED(ENV_MMC_HWPART_REDUND) and internally does
almost the same check as the macro which assigned ENV_MMC_HWPART_REDUND
did, and call it in place of IS_ENABLED(ENV_MMC_HWPART_REDUND).
The difference compared to IS_ENABLED(ENV_MMC_HWPART_REDUND) is
in the last conditional, which does not do plain macro compare
(CONFIG_ENV_OFFSET == CONFIG_ENV_OFFSET_REDUND), but instead does
mmc_offset(mmc, 0) == mmc_offset(mmc, 1). If OF_CONTROL is not
in use, this gets optimized back to original macro compare, but
if OF_CONTROL is in use, this also takes into account the DT
properties u-boot,mmc-env-offset and u-boot,mmc-env-offset-redundant.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Check wget_info->buffer_size for overflow and do not clean the wget_info struct
on failure, let the owner of the struct handle the error. The latter is necesary
, e.g., for when a request fails because the provided buffer was too small.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
This commit fixes an use after free introduced in Commit e55a4acb54
(" efi_loader: net: set EFI bootdevice device path to HTTP when loaded
from wget"). The logic in efi_net_set_dp is reworked so that when the
function is invoked it not only changes the value of the static variable
net_dp (this is how the function was implemented in e55a4acb54) but also
updates the protocol interface of the device path protocol in case efi
has started.
Fixes: e55a4acb54 ("efi_loader: net: set EFI bootdevice device path to HTTP when loaded from wget")
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
This board does not have any NVMe slot, so disable unneeded
CONFIG_NVME_PCI option.
Fixes: bf4a33e725 ("board: rockchip: add FriendlyElec NanoPi R3S")
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The patch enables the second USB3.0 Type-A USB port on the NanoPi R4S
board, which prevents a crash when initializing the usb system in U-Boot
and allows both Type-A USB ports to be used for booting.
=> usb start
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus usb@fe3c0000: "Synchronous Abort" handler, esr 0x96000010, far 0x0
Signed-off-by: Justin Klaassen <justin@tidylabs.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
These two files were using IS_ENABLED() to test for CONFIG flags but omitted
the CONFIG_ prefix and so did not work as expected.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
BootROM leave GPIO4_D6 configured as SDMMC_PWREN function and DW MMC
driver set PWREN high in dwmci_init().
However, HW revision prior to v1.2 must pull GPIO4_D6 low to access
sdmmc. For HW revision v1.2 the state of GPIO4_D6 has no impact.
Upstream Linux commit 26c100232b09 "arm64: dts: rockchip: Fix sdmmc
access on rk3308-rock-s0 v1.1 boards" fixed this issue by adding a
vcc_sd regulator.
Include the new vcc_sd regulator in SPL and enable required Kconfig
options to set GPIO4_D6 low to fix reading sdmmc on v1.1 hw revision.
Fixes: 25438c40a0 ("board: rockchip: Add Radxa ROCK S0")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Refactor the entire kconfig page for mbedtls, adapt mbedtls makefile
and default config file using 'XPL_', in order to have independent
mbedtls kconfig options in U-Boot Proper, SPL, TPL and VPL.
User can choose legacy or mbedtls libraries for them independently.
Set mbedtls native hashing libraries as default when MBEDTLS_LIB,
SPL_MBEDTLS_LIB, TPL_MBEDTLS_LIB or VPL_MBEDTLS_LIB is selected.
If users prefer using U-Boot legacy hashing libraries, please select
MBEDTLS_LIB_HASHING_ALT, SPL_MBEDTLS_LIB_HASHING_ALT,
TPL_MBEDTLS_LIB_HASHING_ALT or VPL_MBEDTLS_LIB_HASHING_ALT for U-Boot
Proper, SPL, TPL and VPL respectively.
Moreover, rename a few kconfig options and update their descriptions to
improve the consistency of terminology.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
U-Boot requires to access x509_internal.h, mbedtls_sha256_context and
mbedtls_sha1_context in the porting layer, and this requires to
enable MBEDTLS_ALLOW_PRIVATE_ACCESS.
Enable it to mscode and pkcs7_parser to fix a mbedtls internal building
error when X509 is selected.
Moreover, Move it to a separate file to avoid enabling it in multiple
places.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Fixed the building failures when WGET_HTTPS,NET_LWIP and MBEDTLS_LIB
are selected due to a few incorrect kconfig dependencies.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/24876
- Convert imx6q-lxr and imxrt1050 to OF_UPSTREAM.
- Fix potential memory leak on ]imx/imx8/imx8m]image.
- Restrict DDR_SI_TEST to only Siemens Capricorn board.
- Fix CONFIG_BOOTCOUNT_ALTBOOTCMD on Data Modul and DH imx8m boards.
There are some device-tree overlays with missing entries for the
keyfile. Add them to sign all images in the U-Boot FIT image.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
There are some device-tree overlays with missing entries for the
keyfile. Add them to sign all images in the U-Boot FIT image.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
The imx6q-lxr devicetree has landed in kernel 6.13.
Switch to OF_UPSTREAM to make use of the upstream devicetree.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Move content of dh_imx6_defconfig into dh_imx6.config. Retain legacy
dh_imx6_defconfig as multi-config for all DH i.MX6 DHSOM based boards.
Introduce separate imx6_dhcom_drc02_defconfig, imx6_dhcom_pdk2_defconfig
and imx6_dhcom_picoitx_defconfig for each i.MX6 DHSOM based board, to
make build for those boards easier. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Deduplicate the config files again, move CONFIG_BOOTCOUNT_ALTBOOTCMD
into common imx8mp_dhsom.config .
Fixes: 940135eea5 ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Deduplicate the config files again, move CONFIG_BOOTCOUNT_ALTBOOTCMD
into common imx8m_data_modul.config .
Fixes: 940135eea5 ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
The environment is missing quotes for string variable, add them.
Fixes: 940135eea5 ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Dynamic memory, referenced by 'line', is allocated at imx8mimage.c:187
by calling function 'getline' and lost at imx8mimage.c:210.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
Dynamic memory, referenced by 'line', is allocated at imx8image.c:270
by calling function 'getline' and lost at imx8image.c:294.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
Dynamic memory, referenced by 'line', is allocated at imximage.c:761
by calling function 'getline' and lost at imximage.c:793.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
The DDR_SI_TEST config option is only relevant to the i.MX8 Capricorn
board.
Make DDR_SI_TEST depend on DDR_SI_TEST so that it does not show up
on other targets.
Signed-off-by: Liya Huang <1425075683@qq.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
The device tree for imxrt1050 is now
available in the /dts/upstream directory.
Migrate board to use OF_UPSTREAM.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Currently, booting via bootstd fails because the kernel cannot be retrieved.
The reason for this is the lack of 'kernel_addr_r'.
Pass 'kernel_addr_r' to fix booting via bootstd.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Currently, booting via bootstd fails because the kernel cannot be retrieved.
The reason for this is the lack of 'kernel_addr_r'.
Pass 'kernel_addr_r' to fix booting via bootstd.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The CONFIG_DEFAULT_FDT_FILE should be imx8mq_evk.dtb for this board
Fixes: 7050bd925f ("imx: imx8mq_evk: Switch to BOOTSTD")
Reported-by: Ludwig Nussel <ludwig.nussel@siemens.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Instead of doing another lookup, trivially access the struct mii_dev
embedded in struct bb_miiphy_bus . No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Instead of doing another lookup, trivially access the struct mii_dev
embedded in struct bb_miiphy_bus . No functional change.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
