The configuration options CONFIG_VIDCONSOLE_AS_LCD and CONFIG_VIDCONSOLE_AS_
NAME have been marked as obsolete and scheduled for deletion in late 2020.
That's already long overdue and the last remaining consumers of these options
have already migrated to using "vidconsole" in their "stdout" and "stderr"
environment variables, so let's delete these two configuration options.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Soeren Moch <smoch@web.de> # tbs2910
Driver uses dev_get_priv() but never allocates it in its
declaration leading to various crashes. Fix this by explicitly
allocating the storage.
Fixes: 9b0b5648d6 ("memory: Add TI GPMC driver")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
This patch provides a driver for i.MX Messaging Unit (MU) using the
commom mailbox framework.
This is ported from Linux (v6.12.8) driver
drivers/mailbox/imx-mailbox.c. Its commit SHA is:
39d7d6177f0c ("mailbox: imx: use device name in interrupt name")
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
The flag for enabling the ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE quirk can be
handled easily enough in Kconfig. This lets us remove a function but not
obviously correct usage of the IS_ENABLED() macro.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/25112
- Add drivers for MFD STM32 TIMERS and STM32 PWM and enable them on stm32mp135f-dk
- Restrict _debug_uart_init() usage in STM32 serial driver
- Add support for environment in eMMC on STM32MP13xx DHCOR SoM
- Introduce DH STM32MP15xx DHSOM board specific defconfigs
- Fix CONFIG_BOOTCOUNT_ALTBOOTCMD update on DH STM32MP1 DHSOM
- Update maintainer for board stm32f746-disco
- Fix Linux cmdline for stm32f769-disco
- Cleanup in stm32f***-u-boot.dtsi and in board_late_init() by removing
legacy led and button management.
Greg Malysa <malysagreg@gmail.com> says:
This series adds all of the supported peripheral drivers for the sc5xx
series of SoCs from Analog Devices and other drivers that are used by
the evaluation kits, such as a GPIO expander used by the EZLITE carrier
boards. This series passes gitlab CI tests.
Link: https://lore.kernel.org/r/20250226173150.13198-1-malysagreg@gmail.com
Legacy PCI devices, like qemu's Bochs VGA device, are allowed to have
prefetchable 32-bit BARs, while PCIe devices are not allowed to have
32-bit prefetchable BARs. Typically prefetchable BARs are 64-bit and
typically the prefetch MMIO window is also 64-bit and placed above
4GiB, as it's the case on qemu sbsa-ref.
Currently the U-Boot code assumes that prefetchable BARs are
64-bit BARs and always tries to assign them into the prefetch
MMIO window.
When a 32-bit BAR is marked as prefetch, but the prefetch area is
not within the first 4GiB of the address space, then downgrade the
BAR and place it in the non-prefetch MMIO window.
For prefetch BARs there's no downside on being placed in non prefetch
MMIO areas, besides the possible slower performance when a driver tries
to map it Write-Combine.
TEST: Fixes pci_auto on QEMU sbsa-ref fails to autoconfigure BAR0.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Since commit 948da7773e ("arm: Add new config option ARCH_VERY_EARLY_INIT")
debug_uart_init() is called respectively in crt0.S and crt0_64.S.
That means that _debug_uart_init() is called for all STM32MP platforms
even for those which doesn't support SPL_BUILD.
So restrict _debug_uart_init() execution for platforms which can have
SPL_BUILD enabled (STM32MP1 platform only).
It's more needed to call debug_uart_init() in stm32mp1/cpu.c.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Add driver to support pwm on STM32MP1X SoCs. The PWM signal is generated
using a multifuntion timer which provide a pwm feature. Clock rate and
addresses are retrieved from the multifunction timer driver.
Signed-off-by: Cheick Traore <cheick.traore@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The value written to the RFLR register includes the length of the CRC
data at the end of each Ethernet frame. So we need to increase the value
written to this register to ensure that we can receive full size frames.
While we're here we can also copy the improved comment from the Linux
kernel.
Fixes: 8ae51b6f32 ("net: ravb: Add Renesas Ethernet RAVB driver")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Fix comment
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Following on from commit 9a699a0a0d ("clk: rzg2l: Ignore enable for
core clocks"), we also need to ignore attempts to disable core clocks to
avoid the need for conditionals around clk_disable_bulk() calls in
drivers which support both RZ/G2L and other Renesas SoCs.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
These functions are no longer necessary, remove them.
The struct bb_miiphy_bus is no longer necessary either,
remove it as well.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Use mdio_alloc() again to allocate MDIO bus. This is possible
because all the miiphybb parameters and ops passing is handled in
at bb_miiphy_read()/bb_miiphy_write() level.
This also fixes previously missed bb_miiphy_free() in .remove
callback of this driver. which does not pose a problem anymore.
Fixes: 08eefb5e79 ("net: sh_eth: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Use mdio_alloc() again to allocate MDIO bus. This is possible
because all the miiphybb parameters and ops passing is handled in
at bb_miiphy_read()/bb_miiphy_write() level.
This also fixes previously missed bb_miiphy_free() in .remove
callback of this driver. which does not pose a problem anymore.
Fixes: 079eaca6e7 ("net: ravb: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Use mdio_alloc() again to allocate MDIO bus. This is possible
because all the miiphybb parameters and ops passing is handled in
at bb_miiphy_read()/bb_miiphy_write() level.
This also fixes previously missed bb_miiphy_free() in .remove
callback of this driver. which does not pose a problem anymore.
Fixes: cbb69c2faf ("net: designware: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Remove the priv member from struct bb_miiphy_bus and its assignment
from drivers. This turns struct bb_miiphy_bus int struct mii_dev
wrapper, to be cleaned up next.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Access to MDIO bus private data can be provided by both
struct mii_dev .priv member and struct bb_miiphy_bus .priv
member, use the former directly and remove .priv from the
later. Drop unused bb_miiphy_getbus(). This removes any
dependency on struct bb_miiphy_bus from the miiphybb code,
except for helper functions which will be removed later.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
The access to struct bb_miiphy_bus_ops via ops pointer in
struct bb_miiphy_bus is not necessary with wrappers added
in previous patch. Pass the ops pointer directly to both
bb_miiphy_read() and bb_miiphy_write() functions.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Do not call bb_miiphy_read()/bb_miiphy_write() accessors directly
in drivers, instead call them through wrapper functions. Those are
meant to be used as function parameter adaptation layer between
struct mii_dev callback function parameters and what the miiphybb
does expect and will soon expect. This is a preparatory patch, no
functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Move miiphybb operations into separate struct bb_miiphy_bus_ops
structure, add pointer to struct bb_miiphy_bus_ops into the base
struct bb_miiphy_bus and access the ops through this pointer in
miiphybb generic code. The variable reshuffling in miiphybb.c
cannot be easily avoided.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
The RZN1 symbol name is CONFIG_RZN1, there is no CONFIG_ARCH_RZN1.
Since RZN1 enables CONFIG_ARCH_RENESAS as well, remove the special
RZN1 entry from Makefile, the RZN1 pinctrl driver will still be
pulled in via CONFIG_ARCH_RENESAS.
Fixes: e4aea57fa7 ("pinctrl: renesas: add R906G032 driver")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Add a simple and transparent LVDS de/encoder driver with a powerdown
gpio and a power supply.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add get_display_timing ops for internal bridges linked to
panels that do not support EDID (MIPI-DSI panels for example)
or have EDID not routed.
Tested-by: Dang Huynh <danct12@riseup.net> (PineTab 2)
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
AMD/Xilinx changes for v2025.04-rc4
Zynq:
- Guard code around SPL_FS_LOAD_PAYLOAD_NAME
Versal*:
- Remove tftp block size 4096
Versal:
- Use clocks per DT binding
- Store driver data in data section
Versal Gen 2:
- Fix major/minor version decoding
Currently, Kconfig allows building CONFIG_DM_74X164 without
CONFIG_DM_SPI, which results in linker errors because this driver
actually uses dm_spi_* functions:
drivers/gpio/74x164_gpio.o: in function `gen_74x164_write_conf':
undefined reference to `dm_spi_claim_bus'
undefined reference to `dm_spi_xfer'
undefined reference to `dm_spi_release_bus'
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Unfortunately this change was not safe as some devices are bound before
relocation, but we don't want to probe them.
It causes 'raise: Signal # 8 caught' on jerry.
Move the bootstage timer to after autoprobe in initf_dm() since the
trace test does not tolerate any variance.
This reverts commit 21dd873572.
Signed-off-by: Simon Glass <sjg@chromium.org>
Line 171 in README is describing that before relocation
no code should use global variable because global variables
are placed to BSS section which is initialized to 0 after
relocation.
On Versal platforms clock driver is initialized before
relocation (via using dm,bootph-all flag in DT) and global
variables are initialized which works if this is used only
before relocation. But the variables are used after
relocation too but values are zeroed which is ending up
incorrect behavior.
That's why place variables to data section to ensure that
values are not cleared which is for now the quickest
temporary solution. The correct way to do it is to move
all global variables to private data to avoid it.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20250218052419.1141139-1-padmarao.begari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
