Raymond Mao <raymond.mao@linaro.org> says:
This patch set adds/adapts a few bloblist APIs and implements Arm arch
custom function to retrieve the bloblist (aka. Transfer List) from
previous loader via boot arguments when BLOBLIST option is enabled and
all boot arguments are compliant to the register conventions defined
in the Firmware Handoff spec v0.9.
If an arch wishes to have different behaviors for loading bloblist
from the previous boot stage, it is required to implement the custom
function xferlist_from_boot_arg().
During bloblist initialization, load the bloblist via boot arguments
from the previous loader.
If a valid bloblist exists in boot arguments, relocate it into the
fixed bloblist memory region.
If not, fallback to support BLOBLIST_ADDR or BLOBLIST_ALLOC.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
The current bloblist pointer and size can be retrieved from global
data, so we don't need to pass them from the function arguments.
This change also help to remove all external access of gd->bloblist
outside of bloblist module.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Instead of expecting the bloblist total size to be the same as the
pre-allocated buffer size, practically we are more interested in
whether the pre-allocated buffer size is bigger than the bloblist
total size.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add bloblist_check_reg_conv() to check whether the bloblist is compliant
to the register conventions defined in Firmware Handoff specification.
This API can be used for all Arm platforms.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Pull request efi-next-2024-02-28
* set IMAGE_DLLCHARACTERISTICS_NX_COMPAT in EFI binaries
* provide SBI based runtime system reset
* page align EFI binary section on ARMv7
* separate .data and .text sections of EFI binaries on ARMv7
The IMAGE_DLLCHARACTERISTICS_NX_COMPAT flag marks an EFI binary where
the following conditions are met [1]:
* Executable and writable sections are separated.
* The application does not run self-modifying code.
* The application uses the EFI_MEMORY_ATTRIBUTE_PROTOCOL when loading
executable code.
* The application does not assume that all memory ranges are usable.
* The stack is not expected to be executable.
The only EFI binaries U-Boot provides that do not fulfill these
requirements are the EFI app and the EFI payload.
Once we have implemented separation of writable and executable memory in
U-Boot we can use the IMAGE_DLLCHARACTERISTICS_NX_COMPAT flag to decide
if we will load an EFI binary.
[1] New UEFI CA memory mitigation requirements for signing
https://techcommunity.microsoft.com/t5/hardware-dev-center/new-uefi-ca-memory-mitigation-requirements-for-signing/ba-p/3608714
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the hc2910-2aghd05 platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the slimbootloader platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the qemu-x86* platforms and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the minnowmax platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the galileo platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the efi-x86_payload* platforms and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the efi-x86_app* platforms and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the edison platform and remove
the otherwise empty file.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the crownbay platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the cougarcanyon2 platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the cherryhill platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the bayleybay platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the coreboot platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the xilinx_mbv platforms and remove
the otherwise empty file.
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Add support for booting the imxrt1050-evk from spi.
Add imximage config and the ability for SPL to boot from NOR.
Enable binman in Kconfig and device tree for imxrt* as it is used to
prepend fspi_header.bin to SPL and u-boot.img.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Nishanth Menon <nm@ti.com> says:
This is a wide cleanup to switch to setting fdtfile using env_set
instead of scripted magic. 'fdtfile' is expected to be set by default.
This allows the stdboot triggered efi loaders to find the correct OS
device tree file even if regular boot process is interrupted by user
intervention.
We shouldn't need finfdt anymore. Drop the env script.
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
The Sielaff i.MX6 Solo board is a control and HMI board for vending
machines. Add support for this board.
The devicetree files are taken from pending changes in the Linux
kernel that are available from linux-next and will likely be
part of Linux v6.9.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
u-boot-dfu-20240215
- Fix avb_verify command with SD cards
- Add u-boot-dfu maintainer tree for AB/AVB
- Avb: report verified boot state based on lock state
- Misc avb refactors improve code quality
Xilinx changes for v2024.04-rc3
zynqmp:
- Cover missing _SE chip variants to fix fpga programming
versal:
- Enable LTO for mini configurations
versal-net:
- Enable LTO for mini configurations
- Fix GIC address to aligned with real silicon
xilinx:
- DTs cleanup and fixups
- Enable HTTP boot
- Add missing spl header to zynqmp.c
With the relatively new button API in U-Boot, it's now much easier to
model the common usecase of mapping arbitrary actions to different
buttons during boot - for example entering fastboot mode, setting some
additional kernel cmdline arguments, or booting with a custom recovery
ramdisk, to name a few.
Historically, this functionality has been implemented in board code,
making it fixed for a given U-Boot binary and requiring the code be
duplicated and modified for every board.
Implement a generic abstraction to run an arbitrary command during boot
when a specific button is pressed. The button -> command mapping is
configured via environment variables with the following format:
button_cmd_N_name=<button label>
button_cmd_N=<command to run>
Where N is the mapping number starting from 0. For example:
button_cmd_0_name=vol_down
button_cmd_0=fastboot usb 0
This will cause the device to enter fastboot mode if volume down is held
during boot.
After we enter the cli loop the button commands are no longer valid,
this allows the buttons to additionally be used for navigating a boot
menu.
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # Tegra30
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
- Add USB support for phycore-imx8mp
- Fix environment corruption, reset on mx6sabresd
- Print reset cause on imx8
- Extend mkimage to support generating an image for i.MXRT FlexSPI
- Add new apalis and colibri variants
- Add support for phyBOARD-Segin-i.MX93 support
- Fix when FEC is primarily used instead of EQOS on i.MX93.
add support for Serial Downloader Boot via UUU as well as flashing emmc
via UUU on USB0 Port of phyBOARD Pollux.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Modify imx8m Flex SPI Configuration Block to work with imxrt.
Add more Flex SPI configuration options to Kconfig.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mn-beacon
Use a local definition for the PHY features. PHY_100BT1_FEATURES are
not defined using the 100BaseT1 bit, so keep this workaround in the driver.
Signed-off-by: "Radu Pirea (NXP OSS)" <radu-nicolae.pirea@oss.nxp.com>
Enrico Leto <enrico.leto@siemens.com> says:
The common folder was initialially created for the common parts of
the products based on draco-am355x board family. We have the
product lines 'pxm2', 'rut' and the base line unfortunately named
'draco'! Adding the new capricorn-imx8 board family, the files
were enhanced without cleanup.
Simplify first EEPROM probe and access that implements both i2c
with & without driver model. Use abstraction functions for this.
Move all am355x specifics to a new file 'board_am335x'.
Clean-up includes, config checks, maintainer.
OPTEE gets loaded into a memory region overlapping with the ram disk.
Fix the ramdisk address so it doesn't overlap with the OPTEE memory
region.
Signed-off-by: Tim Lunn <tim@feathertop.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Sonoff iHost is gateway device designed to provide a Smart Home Hub,
it is based on Rockchip RV1126. There is also a version with 2GB RAM
based off the RV1109 dual core SoC however this works with the same
config as the RV1126 for uboot purposes.
Features:
- Rockchip RV1126
- 4GB DDR4
- 8GB eMMC
- microSD slot
- RMII Ethernet PHY
- 1x USB 2.0 Host
- 1x USB 2.0 OTG
- Realtek RTL8723DS WiFi/BT
- EFR32MG21 Silabs Zigbee radio
- Speaker/Microphone
Signed-off-by: Tim Lunn <tim@feathertop.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
