SoCFPGA updates for v2025.10:
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/27762
This pull request brings a set of updates across SoCFPGA platforms
covering Agilex5, Agilex7, N5X, and Stratix10. The changes include:
* Agilex5 enhancements:
- USB3.1 enablement and DWC3 host driver support
- System Manager register configuration for USB3
- Watchdog timeout increase and SDMMC clock API integration
- dcache handling improvements in SMC mailbox path
- Enable SPL_SYS_DCACHE_OFF in defconfig
* Clock driver improvements:
- Introduce dt-bindings header for Agilex clocks
- Add enable/disable API and EMAC clock selection fixes
- Replace manual shifts with FIELD_GET usage
* DDR updates:
- IOSSM mailbox compatibility check
- Correct DDR calibration status handling
* Device tree changes:
- Agilex5: disable cache allocation for reads
- Stratix10: add NAND IP node
- Enable driver model watchdog
- Enable USB3.1 node for Agilex5
* Config cleanups:
- Simplify Agilex7 VAB defconfig
- Remove obsolete SYS_BOOTM_LEN from N5X VAB config
- Enable CRC32 support for SoCFPGA
- Increase USB hub debounce timeout
Overall this set improves reliability of DDR and cache flows,
adds missing USB and MMC features for Agilex5, and refines clock
and configuration handling across platforms.
This patch set has been tested on Agilex 5 devkit, and Agilex devkit.
- Update MMC entry to match 'mmc' using 'N'
- Add myself as POWER maintainer for regulator and pmic patches. I have
started to handle relevant patches.
- Update QORIQ maintainer. Priyanka has moved to work on other stuff, I
have been handling this for quite some time.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add myself as a maintainer of the NETWORK subsystem since:
- I have effectively been handling net patches in my patchwork queue and
sending pull requests to Tom,
- I do have push access to the u-boot-net custodian tree.
Also, add u-boot-net as the SCM tree for NETWORK (LWIP) since it is where
lwIP-related patches end up too.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
CC: Ramon Fried <rfried.dev@gmail.com>
CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Tom Rini <trini@konsulko.com>
Per a private email, drop Luka Perkov from MAINTAINERS entries.
Reviewed-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Octo Memory Manager driver (OMM) manages:
- the muxing between 2 OSPI busses and 2 output ports.
There are 4 possible muxing configurations:
- direct mode (no multiplexing): OSPI1 output is on port 1 and OSPI2
output is on port 2
- OSPI1 and OSPI2 are multiplexed over the same output port 1
- swapped mode (no multiplexing), OSPI1 output is on port 2,
OSPI2 output is on port 1
- OSPI1 and OSPI2 are multiplexed over the same output port 2
- the split of the memory area shared between the 2 OSPI instances.
- chip select selection override.
- the time between 2 transactions in multiplexed mode.
- check firewall access.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
This pull request introduces initial U-Boot support for Agilex7 M-series, along
with several enhancements and cleanups across existing Agilex platforms. Key
changes include new board support, DDR driver additions, updated device trees,
and broader SoCFPGA SPL improvements.
Highlights:
- Agilex7 M-series bring-up:
- Basic DT support and board initialization for Agilex7 M-series SoC and
SoCDK.
- New sdram_agilex7m DDR driver with UIBSSM mailbox support and HBM support.
- Clock driver support for Agilex7 M-series.
- New defconfig: socfpga_agilex7m_defconfig.
- Agilex and Agilex5 enhancements:
- Improved SPL support: ASYNC interrupt enabling, system manager init
refactor, and cold scratch register usage.
- Updated firewall probing and watchdog support in SPL.
- Cleaned up DDR code, added secure region support for ATF, and improved warm
reset handling.
- Device Tree and config updates:
- Migration to upstream Linux DT layout for Agilex platforms.
- Consolidated socfpga_agilex_defconfig and removed deprecated configs.
- Platform-specific environment variables for Distro Boot added.
- Driver fixes and cleanups:
- dwc_eth_xgmac and clk-agilex cleanup and improvements.
- Several coverity and style fixes.
Contributions in this PR are from Alif Zakuan Yuslaimi, Tingting Meng, and
Andrew Goodbody. This patch set has been tested on Agilex 5 devkit, Agilex
devkit and Agilex7m devkit.
Passing all pipeline tests at SoCFPGA U-boot custodian
https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/27318
use the new email address for community work.
While at it, cleanup git shortlog output, by adding
fixes in .mailmap
Signed-off-by: Heiko Schocher <hs@nabladev.com>
The base address of system manager can be retrieved
using DT framework through the system manager driver.
Enable system manager support for Agilex by probing the
system manager driver to initialize during SPL boot up.
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Combine all MMC, NAND and QSPI configs into single defconfig which is named
as "socfpga_agilex_defconfig". This will be the default defconfig to use.
It supports booting from all three flashes using ARM Trusted Firmware (ATF)
as the secure runtime monitor.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/27236
- Add support for STM32 TIMERS and STM32 PWM on STM32MP25
- Add STM32MP13xx SPL and OpTee-OS start support
- Fix header misuse in stm32 reset drivers
- Fix STMicroelectronics spelling
- Fix clk-stm32h7 wrong macros used in register read
- Fix PRE_CON_BUF_ADDR on STM32MP13
- Fix clock identifier passed to struct scmi_clk_parent_set_in
- Fix stm32 reset for STM32F4/F7 and H7
- Enable OF_UPSTREAM_BUILD_VENDOR for stm32mp13_defconfig
- Add STM32MP23 SoC and stm32mp235f-dk board support
Agilex5 FSBL is required to disable the power of unused peripheral SRAM
blocks to reduce power consumption.
Introducing a new power manager driver for Agilex5 which will be called
as part of Agilex5 SPL initialization process.
This driver will read the peripheral handoff data obtained from the
bitstream and will power off the specified peripheral's SRAM from the
handoff data values.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
The stm32-reset-core.h is located in drivers/reset/stm32/ , it has to
be included using "stm32-reset-core.h" and not <stm32-reset-core.h> ,
otherwise the build fails. Fix it.
Fixes: 0994a627c2 ("reset: stm32mp25: add stm32mp25 reset driver")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The 'EFI PAYLOAD' entry really refers to the EFI loader and EFI APP
refers to the app and the payload.
Rename 'EFI PAYLOAD' to 'EFI LOADER' and 'EFI APP' to 'EFI CLIENT'
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This directory was created when U-Boot gained the ability to run as an
EFI app in 2015. Since then the EFI-loader feature has been added.
The code in lib/efi is not actually used by the loader, so the name is
confusing.
Rename the directory to efi_client to indicate that it includes files
just for U-Boot being a client of EFI, i.e. the EFI app and stub.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add DM driver for Exynos USB PHY controllers. For now it only supports
Exynos850 SoC. Only UTMI+ (USB 2.0) PHY interface is implemented, as
Exynos850 doesn't support USB 3.0. Only two clocks are used for this
controller:
- phy: bus clock, used for PHY registers access
- ref: PHY reference clock (OSCCLK)
Ported from Linux kernel: drivers/phy/samsung/phy-exynos5-usbdrd.c
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Use new email for community work. Also remove my
capricorn SoM maintainer entry since I do not
have access to this hardware anymore.
Signed-off-by: Anatolij Gustschin <ag.dev.uboot@gmail.com>
The Designware IP integrated in TH1520 SoC requires extra clock
configuration to operate correctly. The Linux kernel's T-Head DWMAC glue
driver is ported and adapted to U-Boot's API.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Prepare to split the dns command from cmd/net-lwip.c by moving the
implementation from net/lwip/dns.c to cmd/lwip.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
The SoC pads of TH1520 are separated into three groups (AP 1, AP 2 and
AON) controlled by independent pin controllers. This patch ports their
driver from Linux kernel with most code for setting pinconf and pinmux
kept as is.
The dt-binding of TH1520 pin controller uses a schema where pins to
configure are specfied as strings and looked up at runtime, which the
generic pinctrl helpers of U-Boot cannot parse, thus a customized
set_state() callback is implemented to parse pinconfig nodes and setup
the configuration.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Remove clock/at91.h file as it is subset of
dts/upstream/include/dt-bindings/clock/at91.h.
The constants defined in this header are being used only in dts
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Implement STM32MP25 reset drivers using stm32-core-reset API.
This reset stm32-reset-core API and will be able to use DT binding
index started from 0.
This patch also moves legacy reset into stm32 directory reset.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Assign myself to develop U-Boot port of T-Head TH1520 SoC, and help
maintain related code and review patches.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Inspecting the slre.c code reveals a few bugs; those are easy to
demonstrate with the new '=~' test operator. Before fixing them, let's
add a place to add test cases.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
I guess that touching these files means "tag, you're it". That's fine
with me.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Jerome Forissier <jerome.forissier@linaro.org> says:
This series introduces threads and uses them to improve the performance
of the USB bus scanning code and to implement background jobs in the
shell via two new commands: 'spawn' and 'wait'.
The threading framework is called 'uthread' and is inspired from the
barebox threads [2]. setjmp() and longjmp() are used to save and
restore contexts, as well as a non-standard extension called initjmp().
This new function is added in several patches, one for each
architecture that supports HAVE_SETJMP. A new symbol is defined:
HAVE_INITJMP. Two tests, one for initjmp() and one for the uthread
scheduling, are added to the lib suite.
After introducing threads and making schedule() and udelay() a thread
re-scheduling point, the USB stack initialization is modified to benefit
from concurrency when UTHREAD is enabled, where uthreads are used in
usb_init() to initialize and scan multiple busses at the same time.
The code was tested on arm64 and arm QEMU with 4 simulated XHCI buses
and some devices. On this platform the USB scan takes 2.2 s instead of
5.6 s. Tested on i.MX93 EVK with two USB hubs, one ethernet adapter and
one webcam on each, "usb start" takes 2.4 s instead of 4.6 s.
Finally, the spawn and wait commands are introduced, allowing the use of
threads from the shell. Tested on the i.MX93 EVK with a spinning HDD
connected to USB1 and the network connected to ENET1. The USB plus DHCP
init sequence "spawn usb start; spawn dhcp; wait" takes 4.5 seconds
instead of 8 seconds for "usb start; dhcp".
[1] https://patchwork.ozlabs.org/project/uboot/list/?series=446674
[2] https://github.com/barebox/barebox/blob/master/common/bthread.c
Link: https://lore.kernel.org/r/20250418141114.2056981-1-jerome.forissier@linaro.org
Add myself as the maintainer for the UTHREAD framework, the spawn/wait
commands and the associated tests.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Vendor Authorized Boot flow configurations are enabled for boards
based on Agilex5 SoCFPGA. Also, required changes are made to the
SoCFPGA make file for building and linking relevant secure source
code files.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Note that this undoes the changes of commit cf6d4535cc ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
Rename the C and header files to use the membuf basename, to match the
functions.
Add a MAINTAINERS entry while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
My preferred email address is mkorpershoek@kernel.org now.
This updates the MAINTAINERS files and adds an entry in the
.mailmap file.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
This patch provides a driver for i.MX Messaging Unit (MU) using the
commom mailbox framework.
This is ported from Linux (v6.12.8) driver
drivers/mailbox/imx-mailbox.c. Its commit SHA is:
39d7d6177f0c ("mailbox: imx: use device name in interrupt name")
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Greg Malysa <malysagreg@gmail.com> says:
This series adds all of the supported peripheral drivers for the sc5xx
series of SoCs from Analog Devices and other drivers that are used by
the evaluation kits, such as a GPIO expander used by the EZLITE carrier
boards. This series passes gitlab CI tests.
Link: https://lore.kernel.org/r/20250226173150.13198-1-malysagreg@gmail.com
