The address of the bzImage is not recorded in the bootflow, so we cannot
actually locate the version at present. Handle this case, to avoid
showing invalid data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than holding the state in the implementation code, move it to the
command code. The state is now passed to the implementation functions
and can there (with future work) be pass in from bootstd, without going
through the commands.
Signed-off-by: Simon Glass <sjg@chromium.org>
U-Boot version command is no longer showing information about GCC and LD.
The reason is that version.h has been removed that's why CC_VERSION_STRING
and LD_VERSION_STRING are not pass.
Values are generated to generated/version_autogenerated.h which is sourced
in version.h.
Fixes: 54ecce2cbf ("version: Separate our version string from the version command")
Signed-off-by: Michal Simek <michal.simek@amd.com>
While the code was removed in commit 3766a249a3 ("fs: drop reiserfs")
this reference in the Makefile was missed. Remove it now.
Fixes: 3766a249a3 ("fs: drop reiserfs")
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Gabriel Dalimonte <gabriel.dalimonte@gmail.com> says:
This series adds support for file renaming to EFI_FILE_PROTOCOL.SetInfo().
One of the use cases for renaming in EFI is to facilitate boot loader
boot counting.
No existing filesystems in U-Boot currently include file renaming,
resulting in support for renaming at the filesystem level and a
concrete implementation for the FAT filesystem.
Link: https://lore.kernel.org/r/20250217182648.31294-1-gabriel.dalimonte@gmail.com
The implementation roughly follows the POSIX specification for
rename() [1]. The ordering of operations attempting to minimize the chance
for data loss in unexpected circumstances.
The 'mv' command was implemented as a front end for the rename operation
as that is what most users are likely familiar with in terms of behavior.
The 'FAT_RENAME' Kconfig option was added to prevent code size increase on
size-oriented builds like SPL.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
Fixed the building failures when WGET_HTTPS,NET_LWIP and MBEDTLS_LIB
are selected due to a few incorrect kconfig dependencies.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Currently, the 8-bit escapes are being used, which aren't supported by
vidconsole_escape_char. Since the current usage maps directly to the
3-bit equivalents anyway, let's use those instead.
With this change, the fetch output looks as fetching in the vidconsole
as it does over serial!
Signed-off-by: Sam Day <me@samcday.com>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Tested-by: Ferass El Hafidi <funderscore@postmarketos.org>
Judith Mendez <jm@ti.com> says:
Some K3 devices like am62x and am64x have a M4 processor in the MCU
voltage domain. This patch series introduces remoteproc M4 driver which
will be used to load firmware into and start the M4 remote core.
This series also adds support for R5F cores on am64x SoCs in patch 2 and
sets up environment to load FW in remote cores in patch 3,4,5.
This patch series also enables remoteproc drivers by default as per what
remoteproc sybsystem is supported per SoC, thus all remoteproc options
are now deleted in configs/* since they are no longer required.
This patch series was tested on am64x EVM, am62x SK, am62ax SK,
am62px SK boards.
Any additional tested by's are welcome since I was not able to
test any additional boards.
Tested by running the following commands in u-boot prompt:
=> setenv dorprocboot 1
=> run boot_rprocs
Link: https://lore.kernel.org/r/20250210202944.1071931-1-jm@ti.com
Enable CMD_REMOTEPROC by default if building for K3 ARCH so
that it does not have to be defined in each board defconfig
file.
Signed-off-by: Judith Mendez <jm@ti.com>
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
The setexpr.s command allows to concatenate two strings.
According to the description in doc/usage/cmd/setexpr.rst the parameters
value1 and value2 can be either direct values or pointers to a
memory location holding the values.
Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values
is a direct value. $? is set to false.
* Add support for direct values in setexpr.s.
* Correct the unit test for "setexpr.s fred 0".
* Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'.
* Remove invalid memory leak tests
Link: https://lore.kernel.org/r/20250203151029.60265-1-heinrich.schuchardt@canonical.com
The setexpr.s command allows to concatenate two strings.
According to the description in doc/usage/cmd/setexpr.rst the parameters
value1 and value2 can be either direct values or pointers to a
memory location holding the values.
Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values
is a direct value. $? is set to false.
* Add support for direct values in setexpr.s.
* Correct the unit test for "setexpr.s fred 0".
* Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
TPM2_PCR_Allocate command is required to reconfigure a TPM device
to enable or disable algorithms in run-time, thus this patch introduces
the implementation of PCR allocate APIs and adds related cmd functions
for testing.
To test the feature, ensure that TPM is started up.
Run pcr_allocate command to turn on/off an algorithm, multiple calls
are supported and all changes will be cached:
`tpm2 pcr_allocate <algorithm_name> <on|off>`
Run startup command with argument 'off' to shutdown the TPM.
`tpm2 startup TPM2_SU_CLEAR off`
Reboot the board via `reset` to activate the changes.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
TPM2_shutdown command is sharing same structure and logics with
TPM2_startup, thus this patch extends the existing startup APIs and
cmd functions to support shutdown instead of created new ones.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Up to now we could only use log level, category, and file for filtering.
Allow filtering on a list of functions.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This function is really just getting the data. The size comes along for
the ride. In fact this function is only reliable way to obtain the data
for an image in a FIT, since the FIT may use external data.
Rename it to fit_image_get_data()
Signed-off-by: Simon Glass <sjg@chromium.org>
On 32-bit architectures, LAST_LINE (_LAST_LINE - 1UL) is 64 bits long,
but size_t (from ARRAY_SIZE(...)) is 32 bits. This results in a warning
because the max() macro expects the same type on both sides:
cmd/ufetch.c: In function ‘do_ufetch’:
include/linux/kernel.h:179:24: warning: comparison of distinct pointer types lacks a cast [-Wcompare-distinct-pointer-types]
179 | (void) (&_max1 == &_max2); \
| ^~
cmd/ufetch.c:92:25: note: in expansion of macro ‘max’
92 | int num_lines = max(LAST_LINE + 1, ARRAY_SIZE(logo_lines));
| ^~~
Fix this by casting LAST_LINE to size_t.
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20241211-ufetch-v2-1-2b5432ffaeb1@posteo.net
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Simon Glass <sjg@chromium.org> says:
This series provides a way to keep track of the images used in bootstd,
including the type of each image.
At present this is sort-of handled by struct bootflow but in quite an
ad-hoc way. The structure has become quite large and is hard to query.
Future work will be able to reduce its size.
Ultimately the 'bootflow info' command may change to also show images as
a list, but that is left for later, as this series is already fairly
long. So for now, just introduce the concept and adjust bootstd to use
it, with a simple command to list the images.
This series includes various alist enhancements, to make use of this new
data structure a little easier.
[trini: Drop patch 18 and 19 for now due to size considerations]
Link: https://lore.kernel.org/r/20241115231926.211999-1-sjg@chromium.org
Add a new 'bootstd images' command, which lists the images which have
been loaded.
Update some existing tests to use it. Provide some documentation about
images in general and this command in particular.
Use a more realistic kernel command-line to make the test easier to
follow.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a file-type parameter to this function and update all users. Add a
proper comment to the function which we are here.
This will allow tracking of the file types loaded by the extlinux
bootmeth.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use an alist for this data structure as it is somewhat simpler to
manage. This means that bootstd holds a simple list of bootflow structs
and can drop it at will, without chasing down lists.
Signed-off-by: Simon Glass <sjg@chromium.org>
This relates to more than just the bootdev, since there is a global list
of bootflows. Move the function to the bootstd file and rename it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
This relates to more than just the bootdev, since there is a global list
of bootflows. Move the function to the bootstd file and rename it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Raymond Mao <raymond.mao@linaro.org> says:
Motivations for changes:
Current SMBIOS library and command-line tool is not fully matching with
the requirements:
1. Missing support for other mandatory types (#7, #9, #16, #17, #19).
2. Only a few platforms support SMBIOS node from the device tree.
3. Values of some fields are hardcoded in the library other than fetching
from the device hardware.
4. Embedded data with dynamic length is not supported (E.g. Contained
Object Handles in Type #2 and Contained Elements in Type #3)
Changes:
1. Refactor the SMBIOS library and command-line tool to better align with
the SMBIOS spec.
2. Create an arch-specific driver for all aarch64-based platforms to fetch
SMBIOS private data from the device hardware (processor and cache).
3. Create a sysinfo driver to poppulate platform SMBIOS private data.
4. Add generic SMBIOS DTS file for arm64 platforms for those common strings
and values which cannot be retrieved from the system registers.
Vendors can create their own SMBIOS node using this as an example.
For those boards without SMBIOS nodes, this DTS file can be included to
have a generic SMBIOS information of the system.
5. Add support for Type #7 (Cache Information) and link its handles to
Type #4.
6. To minimize size-growth for those platforms which have not sufficient
ROM spaces or the platforms which don't need detailed SMBIOS
information, new added fields are only being built when kconfig
GENERATE_SMBIOS_TABLE_VERBOSE is selected.
Once this patch is acceptted, subsequent patch sets will add other missing
types (#9, #16, #17, #19).
Tests:
To test this with QEMU arm64, please follow the guide on dt_qemu.rst to
get a merged DT to run with.
```
qemu-system-aarch64 -machine virt -machine dumpdtb=qemu.dtb
cat <(dtc -I dtb qemu.dtb) <(dtc -I dtb ./dts/dt.dtb | grep -v /dts-v1/) \
| dtc - -o merged.dtb
qemu-system-aarch64 -machine virt -nographic -bios u-boot.bin \
-dtb merged.dtb
```
Link: https://lore.kernel.org/r/20241206225438.13866-1-raymond.mao@linaro.org
Update the cmd according to the changes of the smbios library:
1. Refactor smbios cmd print functions to match the content defined
by the specification.
2. Add new print functions for Type 3, 4 and 7.
3. Remove the fallback string "Not specified" from smbios_get_string,
as the spec requires a NULL output for those undefined strings.
4. Update the test_cmd_smbios_sandbox pytest expected result to
align with the smbios library changes and add new pytest
test_cmd_smbios_sysinfo_verbose to test the verbose smbios
output.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Move the smbios field definitions to a separated simple headfile,
which is a prerequisite to be included by dts files.
Add new definitions for cache information.
This patch also includes a few of code optimizations in smbios.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
