The current cmd_ut_sub[] array was fine when there were only a few test
suites. But is quite unwieldy now:
- it requires a separate do_ut_xxx for each suite, even though the code
for most is almost identical
- running more than one suite requires running multiple commands, and
there is no record of which suites passed or failed
- 'ut all' runs all suites but reports their results individually
- we need lots of #ifdefs in the array, mirroring those in the makefile
but maintained in a separate place
In fact the tests are all in the same linker list. The suites are
grouped, so it is possible to access the information without a command.
Introduce a 'suite' array, which holds the cmd_ut_...() function to
call, but can also support running a suite without that function. This
means that the array of struct cmd_tbl is transformed into an array of
'struct suite'.
This will allow removal of many of the functions, particularly those
without test-specific init.
Signed-off-by: Simon Glass <sjg@chromium.org>
Most test suites have a _test suffix. This is not necessary as there is
also a ut_ prefix.
Drop the suffix so that (with future work) the suite name can be used as
the linker-list name.
Remove the suffix from the pytest regex as well, moving it to the top of
the file, as it is a constant.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a Python test which runs 'ut all' and then checks that the expected
suites are present and all tests in each suite are run.
This can help to check that nothing is missing.
Update 'ut info' to ignore the 'all' suite when counting the number of
suites, since that is really just a combination of all the other suites.
Adjust the message for skipped tests so that appears even if no
particular test was selected. This helps the new 'test_suite' test see
what is going on.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is helpful to see a list of available suites. At present this is
handled by the longhelp for the 'ut' command, but this is not in a
format which can be easily parsed by python tests.
Add a -s option to show this. At present it is not possible to show the
number of tests in each suite, but future work will address this. For
now, show a ?
Signed-off-by: Simon Glass <sjg@chromium.org>
Some suites have a different name from that used in the linker list.
That makes it hard to programmatically match the name printed when the
suite runs to the linker-list name it has.
Update the names so they are the same.
Signed-off-by: Simon Glass <sjg@chromium.org>
A few messages lack a newline so the test output shows the next
test-name on the same line. For example:
Beware: this test sets local variable dollar_bar and dollar_quux
and they cannot be unset!Test: hush_test_env_dollar: dollar.c
This is confusing, so fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move these operations into separate functions so that it is clearer what
is needed. These functions can also be called from somewhere other than
ut_run_list().
Signed-off-by: Simon Glass <sjg@chromium.org>
The string conversion functions are implemented in lib/strto.c which is
only compiled if CONFIG_STRTO=y.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The ofnode_find_subnode() function currently processes things two
different ways, so the treatment of unit addresses differs depending on
whether OF_LIVE is enabled or not.
Add a new version which uses the ofnode API and add a test to check that
unit addresses can be matched correctly. Leave the old function in place
for the !OF_LIVE case, to avoid a code-size increase, e.g. on
firefly-rk3288
Signed-off-by: Simon Glass <sjg@chromium.org>
When a unit-address is provided, use it to match against the node
name.
Since this increases code size, put it into a separate function.
Signed-off-by: Simon Glass <sjg@chromium.org>
In many cases it is useful to get the address of a buffer, e.g. when
booting from it. Add a function to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
We want to encourage people to use an allocated bloblist since it is
more flexible than a fixed one. Make this the default, being sure not to
change existing users.
The unit tests require BLOBLIST_FIXED so add a dependency in the
Makefile to avoid build errors.
All sandbox builds require BLOBLIST_FIXED so make that the default for
sandbox.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass <sjg@chromium.org> says:
This series provides a way to keep track of the images used in bootstd,
including the type of each image.
At present this is sort-of handled by struct bootflow but in quite an
ad-hoc way. The structure has become quite large and is hard to query.
Future work will be able to reduce its size.
Ultimately the 'bootflow info' command may change to also show images as
a list, but that is left for later, as this series is already fairly
long. So for now, just introduce the concept and adjust bootstd to use
it, with a simple command to list the images.
This series includes various alist enhancements, to make use of this new
data structure a little easier.
[trini: Drop patch 18 and 19 for now due to size considerations]
Link: https://lore.kernel.org/r/20241115231926.211999-1-sjg@chromium.org
Add a new 'bootstd images' command, which lists the images which have
been loaded.
Update some existing tests to use it. Provide some documentation about
images in general and this command in particular.
Use a more realistic kernel command-line to make the test easier to
follow.
Signed-off-by: Simon Glass <sjg@chromium.org>
Raymond Mao <raymond.mao@linaro.org> says:
Motivations for changes:
Current SMBIOS library and command-line tool is not fully matching with
the requirements:
1. Missing support for other mandatory types (#7, #9, #16, #17, #19).
2. Only a few platforms support SMBIOS node from the device tree.
3. Values of some fields are hardcoded in the library other than fetching
from the device hardware.
4. Embedded data with dynamic length is not supported (E.g. Contained
Object Handles in Type #2 and Contained Elements in Type #3)
Changes:
1. Refactor the SMBIOS library and command-line tool to better align with
the SMBIOS spec.
2. Create an arch-specific driver for all aarch64-based platforms to fetch
SMBIOS private data from the device hardware (processor and cache).
3. Create a sysinfo driver to poppulate platform SMBIOS private data.
4. Add generic SMBIOS DTS file for arm64 platforms for those common strings
and values which cannot be retrieved from the system registers.
Vendors can create their own SMBIOS node using this as an example.
For those boards without SMBIOS nodes, this DTS file can be included to
have a generic SMBIOS information of the system.
5. Add support for Type #7 (Cache Information) and link its handles to
Type #4.
6. To minimize size-growth for those platforms which have not sufficient
ROM spaces or the platforms which don't need detailed SMBIOS
information, new added fields are only being built when kconfig
GENERATE_SMBIOS_TABLE_VERBOSE is selected.
Once this patch is acceptted, subsequent patch sets will add other missing
types (#9, #16, #17, #19).
Tests:
To test this with QEMU arm64, please follow the guide on dt_qemu.rst to
get a merged DT to run with.
```
qemu-system-aarch64 -machine virt -machine dumpdtb=qemu.dtb
cat <(dtc -I dtb qemu.dtb) <(dtc -I dtb ./dts/dt.dtb | grep -v /dts-v1/) \
| dtc - -o merged.dtb
qemu-system-aarch64 -machine virt -nographic -bios u-boot.bin \
-dtb merged.dtb
```
Link: https://lore.kernel.org/r/20241206225438.13866-1-raymond.mao@linaro.org
Update the cmd according to the changes of the smbios library:
1. Refactor smbios cmd print functions to match the content defined
by the specification.
2. Add new print functions for Type 3, 4 and 7.
3. Remove the fallback string "Not specified" from smbios_get_string,
as the spec requires a NULL output for those undefined strings.
4. Update the test_cmd_smbios_sandbox pytest expected result to
align with the smbios library changes and add new pytest
test_cmd_smbios_sysinfo_verbose to test the verbose smbios
output.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
test_extension.py assumes that no extension is known at test start.
This assumption is wrong because we do not come out of reboot.
A prior test may have already hunted for the extension bootdev.
Remove the invalid assert.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Andrew Goodbody <andrew.goodbody@linaro.org> says:
Picking up a series from Dan Carpenter and applying requested
changes for v2.
I had previously set CONFIG_64BIT for arm64. This patchset does the
same thing for sandbox and x86_64. (Mips and riscv were already
doing it). This CONFIG option is used in the Makefile to determine
if it's a 32 or 64 bit system for the CHECKER.
Makefile
1052 # the checker needs the correct machine size
1053 CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
Link: https://lore.kernel.org/r/20241216180736.1933807-1-andrew.goodbody@linaro.org
Should use CONFIG_64BIT to detect a 64 bit compile and not
CONFIG_PHYS_64BIT. This allows more platforms to run the
full test code.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
lmb_alloc_base() is just calling lmb_alloc_base_flags() with LMB_NONE.
There's not much we gain from this abstraction, so let's remove the
former add the flags argument to lmb_alloc_base() and make the code
a bit easier to follow.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
lmb_alloc_addr() is just calling lmb_alloc_addr_flags() with LMB_NONE
There's not much we gain from this abstraction, so let's remove the
latter, add a flags argument to lmb_alloc_addr() and make the code a
bit easier to follow.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
free_mem is a misnomer. We never update it with the free memory for
LMB. Instead, it describes all available memory and is checked against
used_mem to decide whether an area is free or not.
So let's rename this field to better match its usage.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
lmb_reserve() is just calling lmb_reserve_flags() with LMB_NONE.
There's not much we gain from this abstraction.
So let's remove the latter, add the flags argument to lmb_reserve()
and make the code a bit easier to follow.
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
