When printing the contents of an lbaint_t variable we need to use LBAF
to print it in order to get the correct format type depending on 32 or
64bit-ness.
Signed-off-by: Tom Rini <trini@konsulko.com>
This file was making environment calls without including <env.h> and so
relying on an indirect inclusion from elsewhere. Add the missing include
directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
The post framework requires architecture specific implementation
details. At the moment this is only done for ARM and PowerPC so express
that requirement in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
In order to build this command we need to have configured some other
board specific features. Express that requirement in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
A few adc drivers cannot build without access to some platform specific
header files. Express those requirements in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
First, the SATA_MV driver can only build on kirkwood or mvebu platforms
due to header requirements, so add that as a dependency here. Second,
SYS_SATA_MAX_DEVICE is also used by the API code so allow it to be
configured in that case.
Reviewed-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Some of the aspeed platform drivers cannot build without platform
specific headers being available. Express those requirements in Kconfig as
well.
Signed-off-by: Tom Rini <trini@konsulko.com>
These drivers require various headers which only exist on the ARM /
PowerPC platforms which implement the hardware. Express that requirement
in Kconfig as well.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
The nuvoton AES driver cannot build without platform specific headers
being available. Express that requirement in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
The TI EDMA3 driver cannot build without platform specific headers being
available. Express that requirement in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
A large number of gpio drivers cannot build without access to some platform
specific header files. Express those requirements in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
If phy node isn't found in ethernet-phy subnode, try to get it from
phy-handle. And when this fails, only then use Ethernet node. This
fix results in getting correct phy handle properties for the
phy node if defined.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
The SoC node is called 'soc@0', even on NXP branch 6.6-fslc. This fixes
the boot on i.MX8M Nano DualLite, as there is no GPU.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Enable the clock framework on the m2b platform as was done
in m2 variant. This helps to increase the NAND controller performance.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
With the removal of the last i.MX31 platform we can remove the rest of
the underlying architecture code as well.
Fixes: f247354708 ("arm: Remove mx31pdk board")
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
In order for this command to build we need to compile
drivers/crypto/fsl/fsl_blob.c and this in turn includes
drivers/crypto/fsl/jr.h which references "ccsr_sec_t" which is only a
defined type for SYS_FSL_SEC_COMPAT >= 4. Express that requirement in
Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Enable DM_RNG in U-Boot to automatically populate /chosen/kaslr-seed
and enable CAAM to provide entropy.
Enable ARCH_MISC_INIT to initialize the CAAM job ring.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Enable DM_RNG in U-Boot to automatically populate /chosen/kaslr-seed
and enable CAAM to provide entropy.
Enable ARCH_MISC_INIT to initialize the CAAM job ring.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
This driver has no users after we removed the last supported platform in
2024.
Fixes: 26ed58b40f ("arm: Remove devkit3250 board")
Signed-off-by: Tom Rini <trini@konsulko.com>
This driver has no users after we removed the last supported platform in
2023.
Fixes: 7a3ee61f55 ("arm: Remove omap5_uevm board")
Signed-off-by: Tom Rini <trini@konsulko.com>
pkg_resources is deprecated, use migration guide in [1] to migrate to
importlib.resources.
Keep the Python 3.6 backwards compatibility.
This also fixes the binman version test which failed for setuptools
versions that print the deprecation warning.
Change from __name__ to __package__ as with the transition from
pkg_resources to importlib_resources using __name__ results in
TypeErrors [2].
[1] https://importlib-resources.readthedocs.io/en/latest/migration.html
[2] https://github.com/python/importlib_resources/issues/60
Reviewed-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Romain Gantois <romain.gantois@bootlin.com> says:
This is version one of my series which enables Ethernet support on the BBGE
board. This requires three main changes:
- Describing the MAC<->PHY link and DP83867 PHY accurately in the device
tree
- Enabling the RGMII1 pinmux configuration
- Enabling the DP83867 driver
These changes are all applied in patch 2.
Patch 1 enables excluding the DP83867 driver from SPL. This is done to
avoid size issues when adding the DP83867 driver to the am335x-evm
defconfig.
Link: https://lore.kernel.org/r/20250626-bbge-ethernet-v1-0-5b544fb1898f@bootlin.com
Currently, the Ethernet interface of the BBGE board isn't properly
supported.
To support this interface, describe the MAC<->PHY RGMII link and the
DP83867 PHY in the BBGE device tree. Enable the DP83867 PHY driver in
U-Boot Proper and mux the relevant RGMII lines.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Tested-by: Judith Mendez <jm@ti.com>
The DP83867 PHY driver is used by the BeagleBoneGreen Eco board, but adding
it to the am335x-evm defconfig causes SPL to overflow its size limits.
Add a separate option to enable this driver in SPL, so that it can be
enabled in U-Boot without adding unnecessary volume to SPL.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Tested-by: Judith Mendez <jm@ti.com>
João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com> says:
In some use cases, board-specific device tree changes must not be overwritten
by system fixups. Although U-Boot provides ft_board_setup_ex() for this
purpose, it is currently only used on TI Keystone. This series makes
ft_board_setup_ex() a generic option, allowing its use by other architectures
and boards.
Additionally, considering that Toradex Verdin-AM62P hardware lifetime
guarantees are based on a 105°C junction temperature (while TI AM62Px supports
up to 125°C), this series implements necessary changes within TI K3 AM62P and
Toradex board code. These changes include exporting common fixup device Tree
functions used in TI K3 for board-code access and also fixup for AM62P thermal
zones to correctly reflect the number of CPU nodes according to the SoC part
number.
Link: https://lore.kernel.org/r/20250623-am62p-fdt-fixup-trip-points-v1-0-12355eb6a72f@toradex.com
While TI AM62P supports up to 125°C junction temperature, Tj, for
industrial and automotive parts, Toradex Verdin-AM62P hardware lifetime
guarantees consider a 105°C Tj. Fixup the device tree temperature
critical trip points to match the hardware specifications. The
implementation ensures the architecture code will not overwrite the
board specific changes by enabling CONFIG_OF_BOARD_SETUP_EXTENDED for
the Verdin-AM62P.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
TI AM62Px devices support CPU throttling based on thermal alerts.
However, the device tree assumes a 4-core configuration. Since the AM62P
also supports 2-core configurations, add a fixup to dynamically adjust
the cooling-device nodes within thermal zones based on the actual number
of CPU cores available.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Avoid code duplication by making the common TI K3 device tree fixup
functions to be reusable by board-specific code.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
In some use cases, board-specific device tree changes must not be
overwritten by system fixups. Although U-Boot provides
ft_board_setup_ex() for this purpose, it is currently only used on TI
Keystone. Make ft_board_setup_ex() to be a generic option, allowing its
use by other architectures/boards. To maintain backward compatibility,
enable it by default on TI Keystone.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
scene_obj_find can return NULL but this is not checked for before
the return is dereferenced. Add a NULL check.
This issue was found by Smatch.
Also add a NULL check for str.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
In the case where parse_sliteral returns an error then label_name
will not have been assigned to. In order to prevent evaluating
label_name in this case add a check for the return value of parse_sliteral.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
It was discovered that env_do_env_set() currently suffer from a long
time of a possible out-of-bound access for the argv array handling.
The BUG is present in the function env_do_env_set() line:
name = argv[1];
where the function at this point assume the argv at index 1 is always
present and can't be NULL. Aside from the fact that it's always
better to validate argv entry with the argc variable, situation where
the argv[1] is NULL is actually possible and not an error condition.
A example of where an out-of-bound access is triggered is with the
command "askenv - Press ENTER to ...".
This is a common pattern for bootmenu entry to ask the user input after
a bootmenu command succeeded.
In the context of such command, the while loop before "name = argv[1];"
parse the "-" char as an option arg and increment the argv pointer by
one (to make the rest of the logic code ignore the option argv) and
decrement argc value.
The while loop logic is correct but at the "name = argv[1];" line, the
argv have only one element left (the "-" char) and accessing argv[1]
(aka the secong element from argv pointer) cause an out-of-bound access
(making the bootloader eventually crash with strchr searching in invalid
data)
To better handle this and prevent the out-of-bound access, actually
check the argv entry left (with the use of the argc variable) and exit
early before doing any kind of array access.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Sometimes when building a platform such as imx28_btt3 we can get an
error such as:
gzip: fit-dtb.blob: warning: file timestamp out of range for gzip format
make[1]: *** [Makefile:1219: fit-dtb.blob.gz] Error 2
make[1]: *** Deleting file 'fit-dtb.blob.gz'
make: *** [Makefile:186: sub-make] Error 2
This is typically resolved by telling gzip to ignore the timestamp.
Signed-off-by: Tom Rini <trini@konsulko.com>
Commit 93b55636b0 ("tools: kwboot: Allow any baudrate on Linux") added a
tcgetattr() function to be used, instead of the libc's termios functions.
This was done to allow using the raw TCGETS2/TCSETS2 ioctls that allow to
support arbitrary baud rates.
This breaks the build for PowerPC, because that architecture does not have
a struct termios2 defined because the termios and ktermios are the same.
On PowerPC, the termios ioctl() emulates the TCGETS2/TCSETS*2 ioctls with
tcgetattr/tcsetattr using just the struct termios (that's as mentioned the
same than what is defined as struct termios2 in other architectures).
So there is no need to use the TCGETS2/TCSETS2 ioctls on that architecture
and just TCGETS/TCSETS ioctls with termios as defined by PowerPC is enough.
Fixes: 93b55636b0 ("tools: kwboot: Allow any baudrate on Linux")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The commit under fixes tag includes "pcie-cadence.h" using angle
brackets. Since the header file is not in standard include path change
it to double quotes to ensure proper inclusion and avoid build issues,
especially on older compilers.
Fixes: a4a0edc604 ("pci_endpoint: Add TI K3 Cadence PCIe Endpoint Controller driver")
Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
With the latest TIFS firmware, an additional virtual interrupt and
event is reserved for TIFS usage on am62x and am62ax devices.
Update the rm-cfg to reflect this new reservation.
Based on commit 87720385ab ("board: ti: rm-cfg: Update rm-cfg to
reflect new resource reservation").
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
EXT_DTB overrides the of_list_dirs that is passed to binman during
builds. This causes binman to not find the normal DTB paths and instead
it just is able to use the path for EXT_DTB only.
Add the default of_list_dirs that is used for normal binman builds to
EXT_DTB usecase as well.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
The object= part matches against the label that the pkcs11 token uses
for that object, but in some cases, specifically with a Yubikey using
ykcs11, where the keys have been imported, the labels differ between the
private and public keys [1], making the object= matching useless. These
keys will have the same id however, so matching against that works for
both the private and public part.
[1]: https://github.com/Yubico/yubico-piv-tool/blob/master/doc/YKCS11/Functions_and_values.adoc#key-alias-per-slot-and-object-type
Signed-off-by: Tobias Olausson <tobias@eub.se>
The variable base is unsigned so >= 0 is always true. Fix this test
so that it is actually useful. The fix prevents the code from causing
a segfault in the case where Ctrl-w is pressed on a line consisting
only of spaces.
Fixes: dcc18ce0db ("cli: Implement delete-word in cread_line()")
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
This file does not need <asm/gpio.h> so remove it. This file does
however need <linux/types.h> so add that in. This also shows that
arch/arm/mach-rockchip/rk3399/rk3399.c and board/lg/star/star.c were
indirectly getting <asm/gpio.h> from here, so add <asm/gpio.h> to them.
Signed-off-by: Tom Rini <trini@konsulko.com>
