Add board-specific environment variables to imx8ulp_evk.env for better
maintainability. Define bsp_bootcmd in the environment to resolve the
runtime error: "bsp_bootcmd" not defined.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Replace CONFIG_DISTRO_DEFAULTS with CONFIG_BOOTSTD_FULL to enable the
standard boot framework and use standard boot on i.MX8ULP.
Update CONFIG_BOOTCOMMAND to run bootflow scan before falling back to
board-specific bootcmd, and remove legacy distro boot environment from
imx8ulp_evk.h since bootstd now handles boot targets.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
If there is some window of memory that must be used for where the device
tree is relocated to, bootm_low + bootm_size (or often just bootm_size)
or bootm_mapsize are the correct way do this. Please see
doc/usage/environment.rst for more details.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com>
This pull request brings together a set of fixes and enhancements across
the SoCFPGA platform family, with a focus on MMC/SPL robustness, EFI
boot enablement, and Agilex5 SD/eMMC support.
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/28776
Highlights:
*
SPL / MMC:
o
Fix Kconfig handling for
SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
o
Correct raw sector calculations and respect explicit sector values
when loading U-Boot from MMC in SPL
o
Adjust raw MMC loading logic for SoCFPGA platforms
*
EFI boot:
o
Permit EFI booting on SoCFPGA platforms
o
Disable mkeficapsule tool build for Arria 10 where unsupported
*
Agilex5:
o
Upgrade SDHCI controller from SD4HC to SD6HC
o
Enable MMC and Cadence SDHCI support in defconfig
o
Add dedicated eMMC device tree and defconfig for Agilex5 SoCDK
o
Revert incorrect GPIO configuration for SDIO_SEL
o
Refine U-Boot DT handling for SD and eMMC boot variants
*
SPI:
o
Allow disabling the DesignWare SPI driver in SPL via Kconfig
*
Board / configuration fixes:
o
Enable random MAC address generation for Cyclone V
o
Fix DE0-Nano-SoC boot configuration
o
Remove obsolete or conflicting options from multiple legacy
SoCFPGA defconfigs
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The TI AM43xx HS boards have been using CFG_PRAM to hide the top 64MB
firewalled DRAM memory from U-Boot. However, CFG_PRAM only prevents
U-Boot from relocating into that memory, but it is still open for access
for any other usage.
Therefore, migrate into using CONFIG_SYS_MEM_TOP_HIDE which reduces the
ram size itself ensuring that memory is not visible to U-Boot at all
(either for reloc, or general usage).
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS. However, this platform also has a large comment
block that explains that given previous stage loaders and other parts of
the memory map (that may not be in the device tree we see?), adjust this
to use bootm_size to restrict relocation to be below the CMA area and
update the comment to match.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
When this platform was removed the config header file was missed. Remove
that now.
Fixes: ddfc004009 ("arm: Remove xpress board")
Signed-off-by: Tom Rini <trini@konsulko.com>
When these platforms were removed the common config header file was
missed. Remove that now.
Fixes: a0cacddcaf ("arm: Remove zc5202 and zc5601 boards")
Signed-off-by: Tom Rini <trini@konsulko.com>
Add initial support for Renesas R-Car X5H R8A78000 Ironhide board.
This consists mainly of DTs, Makefile and Kconfig entries and board
specific configuration files.
The DTs will be gradually switched over to Linux DTs via OF_UPSTREAM
once Linux DTs become available upstream, as upstreaming progresses.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add support for a generic platform which intends to support multiple
boards powered by ARMv8 Samsung Exynos SoCs. Some important features
include:
* Fastboot: This is present to provide an open alternative to Samsung's
proprietary Odin protocol. The board file configures certain features
for fastboot, such as a dynamically allocated fastboot buffer, and
standardized (lowercase) partition aliases.
* EFI: Kernel image can be loaded from an EFI partition. This
adopts a standard booting process, which multiple OS distributions
can rely on.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
While at it, adjust the TQ-Systems copyright info to include
consistent company information, the mail address to reach all
developers at TQ-Systems for questions regarding U-Boot support
for our SOM and remove author's company mail address not suitable
for plain text mail.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Marek Vasut <marek.vasut@mailbox.org>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
