There is a config option to run the PMIC at nominal voltages
which is not enabled on the i.MX8MP Beacon kit, so it the PMIC
runs at overdrive voltages. Unfortuately, the check for this
condition to set the GIC clock parent and rate is backwards from
what it should be, and accidentally sets the GIC clock to nominal
if the PMIC is in overdrive, and sets the GIC clock to overdrive
if the PMIC is in nominal. Fix this by inverting the logic on the
check.
Fixes: ab53bd43db ("arm64: imx: Add support for imx8mp-beacon-kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
The configuration descriptions generated by binman contain the vendor
device-tree directory. Instead of adding it to all match strings just strip
it off.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
JH7110 boards are currently the only use case for multi DTB FIT images
on RISC-V.
Booting JH7110 systems with a VisionFive 2 device-tree used to kind of
work without causing harm to the hardware. But there is no guarantee
that this will hold true in future. So we should not rely on it.
Before the current patch series booting failed on unsupported boards due
to the lack of a device-tree in the binman generated default configuration
when reaching main U-Boot.
By not setting a default configuration booting will now fail on
unsupported boards already in SPL. This allows SPL to
continue with the next boot source for a possible recovery.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E Shattow <e@freeshell.de>
Binman can automatically generate device-tree and configuration entries in
the FIT image based on CONFIG_MULTI_DTB_FIT if the binman node includes the
right sub-nodes.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E Shattow <e@freeshell.de>
Remove CFG_SYS_SDRAM_BASE so that we can get DRAM base
from dt instead of compile time config.
Removing this config helps the u-boot more portable.
Signed-off-by: Jimmy Ho <jimmy.ho@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Introduced in commit 5a4e0625ac ("riscv: dts: sophgo: Add ethernet
node"), eth_{csrclk,ptpclk} were used as placeholders for ethernet
controller. As the real clock controller has been added, drop them to
clean the devicetree up.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The zkr ISA extension can be used to generate random numbers. Since RVA22
zkr is an optional ISA extension. It can be emulated by QEMU. Our RNG
driver detects if the extension is usable during driver binding. Let's
enable it by default on QEMU.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Without 'nvme scan' the ESP on the NVMe drive is not found early.
EFI variables cannot be persisted.
Hit any key to stop autoboot: 0
Cannot persist EFI variables without system partition
** Booting bootflow '<NULL>' with efi_mgr
Loading Boot0000 'mmc 0' failed
EFI boot manager: Cannot load any image
Boot failed (err=-14)
scanning bus for devices...
** Booting bootflow 'nvme#1.blk#1.bootdev.part_1' with efi
Booting /\EFI\BOOT\BOOTRISCV64.EFI
error: no suitable video mode found.
GNU GRUB version 2.12
With 'nmve scan' booting works as expected.
Hit any key to stop autoboot: 0
** Booting bootflow '<NULL>' with efi_mgr
Loading Boot0000 'mmc 0' failed
Loading Boot0001 'nvme 0' failed
Booting: nvme 1
error: no suitable video mode found.
GNU GRUB version 2.12
Reported by Yuri Zaporozhets <yuriz@vodafonemail.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
As the code is today, we get a warning about "select" statements on
"choice" options not doing anything. In this case, the option
SPL_RISCV_MMODE is the default.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Tianrui Wei <tianrui-wei@outlook.com>
These helpers wrongly return the updated register value. As a non-zero
value indicates failure, this causes various clock operations are
considered failed.
Correct the return value to constant zero, since these simple MMIO
operations won't fail. This fixes clock enabling failures during booting
process,
In: serial@4140000
Out: serial@4140000
Err: serial@4140000
Net: Enable clock-controller@3002000 failed
failed to enable clock 0
No ethernet found.
which leads to misoperation of various peripherals.
Fixes: 5f364e072e ("clk: sophgo: cv1800b: Add clock controller driver for cv1800b SoC")
Tested-by: Yuguo Pei <purofle@gmail.com>
Signed-off-by: Yao Zi <ziyao@disroot.org>
qcom-next-20230324:
* msm8916 gets proper sysreset and spin-table support
* The first new IPQ platform is added - the IPQ9574. The IPQ series are
used in routers. The flashing process is also documented
* mach-snapdragon gains the ability to boot with an internal FDT and
still parse memory from an externally provided one
* SC7280 gets a pinctrl driver and various clock driver improvements.
* Qualcom clock drivers will now actually return an error when
attempting
to enable a clock which isn't described.
* Qualcomm pinctrl drivers will now return an error when attempting to
configure an invalid function mux
Ben reports a failure to boot the kernel on hardware that starts its
physical memory from 0x0.
The reason is that lmb_alloc_addr(), which is supposed to reserve a
specific address, takes the address as the first argument, but then also
returns the address for success or failure and treats 0 as a failure.
Since we already know the address change the prototype to return an int.
Reported-by: Ben Schneider <ben@bens.haus>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ben Schneider <ben@bens.haus>
Reviewed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
In case ENV_IS_IN_SPI_FLASH is disabled, returning ENVL_SPI_FLASH
leads to failure to find environment driver on start up. Fix this
by testing whether ENV_IS_IN_SPI_FLASH is enabled and if not, then
return ENVL_NOWHERE instead.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass struct udevice * into imx_clk_fixed_factor*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
Use clock-names property which is accessible via parent clock OF node
to look up the parent clock by name instead of depending on unreliable
global clock name to perform look up.
Signed-off-by: Marek Vasut <marex@denx.de>
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in clk-fixed-factor registration.
Signed-off-by: Marek Vasut <marex@denx.de>
Use clock-names property which is accessible via parent clock OF node
to look up the parent clock by name instead of depending on unreliable
global clock name to perform look up.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass struct udevice * into imx_clk_divider*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in clk-divider clock registration.
Signed-off-by: Marek Vasut <marex@denx.de>
Use clock-names property which is accessible via parent clock OF node
to look up the parent clock by name instead of depending on unreliable
global clock name to perform look up.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass struct udevice * into imx_clk_pllv3*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
Convert clock-osc-24m back to osc_24m and clock-osc-32k back to osc_32k.
These are the clock which match clock tables in Linux. This is now
possible because the clock drivers now resolve clock names based on
clock-names DT property in the CCM DT node.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass struct udevice * into imx_clk_composite*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
Use clock-names property which is accessible via parent clock OF node
to look up the parent clock by name instead of depending on unreliable
global clock name to perform look up.
Signed-off-by: Marek Vasut <marex@denx.de>
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in clk-composite registration.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass U-Boot specific struct udevice pointer to clock parent device
to clk_register_gate*(), so clk_register_gate*() can access the parent
udevice.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass struct udevice * into imx_clk_gate*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
Use clock-names property which is accessible via parent clock OF node
to look up the parent clock by name instead of depending on unreliable
global clock name to perform look up.
Signed-off-by: Marek Vasut <marex@denx.de>
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in gate2 clock registration.
Signed-off-by: Marek Vasut <marex@denx.de>
Use clock-names property which is accessible via parent clock OF node
to look up the parent clock by name instead of depending on unreliable
global clock name to perform look up.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass U-Boot specific struct udevice pointer to clock parent device
to clk_register_mux(), so clk_register_mux() can access the parent
udevice.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass struct udevice * into imx_clk_mux*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
Use clock-names property which is accessible via parent clock OF node
to look up the parent clock by name instead of depending on unreliable
global clock name to perform look up.
Signed-off-by: Marek Vasut <marex@denx.de>
Neither clk_register_mux_table() nor clk_hw_register_mux_table()
are called outside of clk-mux.c , fold both into clk_register_mux().
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Add clk_resolve_parent_clk() to resolve parent clock udevice name
based on clock-names DT property. This is used in SoC clock drivers
to look up the clock name in clock tables, which matches a clock
name in DT clock-names property, and convert it into udevice name
which is used by U-Boot clock framework to look up parent clock in
e.g. clk_register() using uclass_get_device_by_name(UCLASS_CLK,
parent_name, &parent);
Signed-off-by: Marek Vasut <marex@denx.de>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/25267
- Allow the registration and enablement of the i.MX UART clocks via DM,
without the need of manually calling init_uart_clk().
- Remove duplicated 'mmc dev ${mmcdev}' commands.
- Rework some of the RAM related Kconfig symbols for phycore_imx8mp.
The UUU tool excepts the interrupt-in endpoint to be ep1in, otherwise
it crashes. This is a result of the previous hard-coded EP setup in
drivers/usb/gadget/epautoconf.c which did special-case EP allocation
for SPL builds, and which was since converted to this callback, but
without the special-case EP allocation in SPL part.
This reinstates the SPL part in an isolated manner, only for NXP iMX
SoCs, only for SPL builds, and only for the ep1in interrupt-in endpoint.
Fixes: 1918b8010c ("usb: dwc3: gadget: Convert epautoconf workaround to match_ep callback")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20250319220805.219001-1-marex@denx.de
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
spl_perform_fixups is redundant in the current implementation. SPLs call
dram_init during spl_enable_cache in arch/arm/mach-k3/common.c. In
U-Boot, dram_init and dram_init_banksize are automatically called in
init_sequence_f. Therefore, SPLs and U-Boot always determine the correct
RAM size. During Linux boot, fdt_fixup_memory_banks adjusts the RAM size
in the Linux device tree, ensuring correct RAM usage.
dram_init() calls get_ram_size() for the Verdin AM62, which determines
the correct RAM size through read/write operations. However, due to the
K3 bootflow placing ATF in RAM and requiring cache coherence, calling
get_ram_size() with caches enabled prevents ATF boot. Removing this call
restores ATF boot functionality.
This fixes a regression introduced in commit 4164289db8 ("board:
verdin-am62: fix missing memory fixup call") which prevents some of our
Verdin AM62 modules from booting.
Fixes: 4164289db8 ("board: verdin-am62: fix missing memory fixup call")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
