Change the logic for selecting pmic_children_info to use the compatible
string from the devicetree instead of expecting the pwrap (part of the
MCU) to correspond to the separate PMIC chip.
In addition to being more correct, it also saves a few lines of code for
each MCU type that is added by dropping the enum and type field.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260409-mtk-pmic-fixes-v2-6-73e83aa6345b@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Add a PWRAP_CAP_INIT capability flag to specify if it is safe to call
pwrap_init() or not. Not all targets define the registers accessed
by pwrap_init(). In that case, it is expected that an earlier bootloader
has already initialized the PMIC. If not, we now return an error instead
of trying to access undefined registers.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260409-mtk-pmic-fixes-v2-3-73e83aa6345b@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Balaji Selvanathan <balaji.selvanathan@oss.qualcomm.com> says:
This series replaces the SYNC_CACHE approach with FUA (Force Unit
Access) to prevent data loss during board resets while avoiding
system hangs during large sparse image flashing operations.
The previous SYNC_CACHE implementation caused timeouts and hangs
when flashing large sparse images because it issued cache sync
commands after every write operation. The FUA approach achieves
the same data integrity goal by setting the FUA bit in
WRITE10 commands.
Link: https://lore.kernel.org/r/20260416-enable_fua-v3-0-84508de2bfd9@oss.qualcomm.com
Enable the Force Unit Access (FUA) bit in SCSI WRITE10 commands to
ensure writes bypass the device's volatile cache and go directly to
non-volatile storage. This provides write-through behavior that prevents
data loss during board resets.
Reviewed-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Signed-off-by: Aswin Murugan <aswin.murugan@oss.qualcomm.com>
Signed-off-by: Balaji Selvanathan <balaji.selvanathan@oss.qualcomm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
While the SYNC_CACHE approach prevents data loss during board resets,
it causes system hangs during large sparse image flashing operations.
This will be replaced with a FUA (Force Unit Access) approach in future
commit, which achieves the same data integrity goal more efficiently.
This reverts commit ffe4e6ab42.
Signed-off-by: Balaji Selvanathan <balaji.selvanathan@oss.qualcomm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Quentin Schulz <foss+uboot@0leil.net> says:
This migrates the net options away from the main Kconfig to net/Kconfig,
rename the current NET option to NET_LEGACY to really highlight what it
is and hopefully encourage more people to use lwIP, add a new NET
menuconfig (but keep NO_NET as an alias to NET=n for now) which then
allows us to replace all the "if legacy_stack || lwip_stack" checks with
"if net_support" which is easier to read and maintain.
The only doubt I have is wrt SYS_RX_ETH_BUFFER which seems to be needed
for now even when no network is configured? Likely due to
include/net-common.h with PKTBUFSRX?
No change in behavior is intended. Only change in defconfig including
other defconfigs where NO_NET=y or NET is not set, in which case NO_NET
is not set or NET=y should be set in the top defconfig. Similar change
required for config fragments. See commit log in patch adding NET
menuconfig for details.
This was tested based on 70fd0c3bb7 ("x86: there is no
CONFIG_UBOOT_ROMSIZE_KB_12288"), from within the GitLab CI container
trini/u-boot-gitlab-ci-runner:noble-20251013-23Jan2026 and set up
similarly as in "build all platforms in a single job" GitLab CI job.
#!/usr/bin/env bash
set -o pipefail
set -eux
ARGS="-BvelPEWM --reproducible-builds --step 0"
./tools/buildman/buildman -o ${O} --force-build $ARGS -CE $*
./tools/buildman/buildman -o ${O} $ARGS -Ssd $*
O=../build/u-boot/ ../u-boot.sh -b master^..b4/net-kconfig |& tee ../log.txt
I can't really decipher the log.txt, but there's no line starting with
+ which would be an error according to tools/buildman/builder.py help
text. Additionally, because I started the script with set -e set and
because buildman has an exit code != 0 when it fails to build a board,
and I have the summary printed (which is the second buildman call), I
believe it means all builds passed.
The summary is the following:
aarch64: (for 537/537 boards) all +0.0 rodata +0.0
uniphier_v8 : all +1 rodata +1
u-boot: add: 0/0, grow: 1/0 bytes: 1/0 (1)
function old new delta
data_gz 10640 10641 +1
arm: (for 733/733 boards) all -0.0 rodata -0.0
uniphier_v7 : all -1 rodata -1
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-1 (-1)
function old new delta
data_gz 11919 11918 -1
opos6uldev : all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 18778 18775 -3
uniphier_ld4_sld8: all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 11276 11273 -3
stemmy : all -20 rodata -20
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-20 (-20)
function old new delta
data_gz 15783 15763 -20
As far as I could tell this data_gz is an automatically generated array
when CONFIG_CMD_CONFIG is enabled. It is the compressed .config stored
in binary form. Because I'm changing the name of symbols, replacing a
menu with a menuconfig, additional text makes it to .config and the
"# Networking" section in .config disappears.
Here is the diff for the 5 defconfigs listed above, generated with:
for f in build/*-m; do
diff --unified=0 $f/.config $(dirname $f)/$(basename -a -s '-m' $f)/.config
done
(-m is the build directory for master, and without the suffix, it's the
top commit of this series)
"""
--- build/opos6uldev-m/.config 2026-04-20 10:53:49.804528526 +0200
+++ build/opos6uldev/.config 2026-04-20 11:03:37.430242767 +0200
@@ -970,4 +969,0 @@
-
-#
-# Networking
-#
@@ -975,0 +972 @@
+CONFIG_NET_LEGACY=y
--- build/stemmy-m/.config 2026-04-20 11:01:33.653698123 +0200
+++ build/stemmy/.config 2026-04-20 11:04:53.452577311 +0200
@@ -733,4 +732,0 @@
-
-#
-# Networking
-#
@@ -738,2 +733,0 @@
-# CONFIG_NET is not set
-# CONFIG_NET_LWIP is not set
--- build/uniphier_ld4_sld8-m/.config 2026-04-20 11:00:41.605469071 +0200
+++ build/uniphier_ld4_sld8/.config 2026-04-20 11:04:22.226439899 +0200
@@ -997,4 +996,0 @@
-
-#
-# Networking
-#
@@ -1002,0 +999 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v7-m/.config 2026-04-20 10:53:04.019307319 +0200
+++ build/uniphier_v7/.config 2026-04-20 11:03:01.688085486 +0200
@@ -1004,4 +1003,0 @@
-
-#
-# Networking
-#
@@ -1009,0 +1006 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v8-m/.config 2026-04-20 10:43:05.614441175 +0200
+++ build/uniphier_v8/.config 2026-04-20 10:41:03.214852130 +0200
@@ -875,4 +874,0 @@
-
-#
-# Networking
-#
@@ -880,0 +877 @@
+CONFIG_NET_LEGACY=y
"""
This is fine:
- Networking menu doesn't exist anymore so "#\n# Networking\n#\n" won't
be in .config anymore.
- opos6uldev, uniphier_ld4_sld8, uniphier_v7 and uniphier_v8 all have
(old) CONFIG_NET enabled, (new) CONFIG_NET will still be set but
CONFIG_NET_LEGACY also needs to be defined now to reflect the stack
choice (even if default),
- stemmy has CONFIG_NO_NET set, which means CONFIG_NET and
CONFIG_NET_LWIP are not reachable anymore hence why they don't need to
be part of .config,
GitLab CI was run on this series (well, not exactly, but it's only
changes to the git logs that were made):
https://source.denx.de/u-boot/contributors/qschulz/u-boot/-/pipelines/29849
It passes.
Link: https://lore.kernel.org/r/20260420-net-kconfig-v1-0-9900002d8e72@cherry.de
Since the move to make NET a menuconfig and NO_NET a synonym of NET=n,
when NET is enabled, NET_LEGACY || NET_LWIP is necessarily true, so
let's simplify the various checks across the codebase.
SPL_NET_LWIP doesn't exist but SPL_NET_LEGACY is an alias for SPL_NET so
the proper symbol is still defined in SPL whenever needed.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Highlight that NET really is the legacy networking stack by renaming the
option to NET_LEGACY.
This requires us to add an SPL_NET_LEGACY alias to SPL_NET as otherwise
CONFIG_IS_ENABLED(NET_LEGACY) will not work for SPL.
The "depends on !NET_LWIP" for SPL_NET clearly highlights that it is
using the legacy networking app so this seems fine to do.
This also has the benefit of removing potential confusion on NET being a
specific networking stack instead of "any" network stack.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Some virtio implementations may forward the virtio requests directly to
the underlying hw. The hw may have some restrictions in how many and how
big the requests can be. Therefore, the corresponding virtio device will
announce this limitations with the SIZE_MAX & SEG_MAX feature.
Add support for those features. Split an io request into multiple virtio
requests if more than seg_max segments would be used. Also split a
single buffer request into multiple segments if the buffer is bigger
then size_max.
Signed-off-by: Christian Pötzsch <christian.poetzsch@kernkonzept.com>
Signed-off-by: Adam Lackorzynski <adam@l4re.org>
Currently the implementation does not just skip all devices beside
device 0, it also skips all functions (besides 0) on device 0. This
broke basically all AMD platforms, since they have a lot of internal SOC
devices behind these functions.
This was detected, because the XHCI controller and therefore the USB
devices were not found by u-boot on AMD/crater platform.
PCI_MASK_BUS() returns both device and function bits, so it skips any
bdf where either device > 0 or function > 0. Using PCI_DEV() extracts
only the device number, matching the intent in only_one_child().
It therefore now checks all functions on device 0 (Linux does the same).
I build tested u-boot as coreboot payload and run it on a recent x86 AMD
platform. Devices like the XHCI controller are now found again.
Fixes: fbde868ba4 ("pci: skip unnecessary PCIe scanning")
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
CC: Tom Rini <trini@konsulko.com>
CC: Andrew Goodbody <andrew.goodbody@linaro.org>
CC: George McCollister <george.mccollister@konsulko.com>
CC: Simon Glass <sjg@chromium.org>
Various Qualcomm additions this cycle:
* USB superspeed support for 1 platform
* Initial support for the Milos platform and the Fairphone Gen 6
(chainloaded from ABL)
* Improved support for booting with OP-TEE on supported platforms
* Initial basic power domain support
Notably there is a generic change to the device core, missing power
domains will no longer cause a device to fail probe and instead will
just print a warning. This shouldn't affect any existing platforms.
OP-TEE message UID check API can be useful to know whether OP-TEE
is enabled on not assuming the corresponding SMC call is properly
handled if OP-TEE is not supported.
This API can be used by platform code to know OP-TEE presence and
on that basis OP-TEE DT node can be added as part of DT fixups for
the OP-TEE driver probe to happen for both U-Boot and Linux.
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://patch.msgid.link/20260127062341.723966-2-sumit.garg@kernel.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Add a 100 ms delay after clearing the core soft reset bit to ensure
the DWC3 controller has sufficient time to complete its reset
sequence before subsequent register accesses.
Without this delay, USB initialization can fail on some Qualcomm
platforms, particularly when using super-speed capable PHYs like
the QMP USB3-DP Combo PHY on SC7280/QCM6490.
Taken from Linux commit f88359e1588b ("usb: dwc3: core: Do core softreset when switch mode")
Signed-off-by: Balaji Selvanathan <balaji.selvanathan@oss.qualcomm.com>
Reviewed-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251203110735.1959862-3-balaji.selvanathan@oss.qualcomm.com
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
The Renesas RZ/G2L (and RZ/G2LC) USBHS controller requires the
CNEN bit in the SYSCFG register to be set for function operation.
Additionally, its CFIFO is byte-addressable.
Introduce a new renesas_usbhs_driver_param structure for the
RZ/G2L SoC and link it via the udevice_id data pointer. Update
usbhs_probe() to accept the udevice pointer to retrieve these
parameters during initialization.
This alignment follows the logic used in the Linux kernel
renesas_usbhs driver.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Michele Bisogno <micbis.openwrt@gmail.com>
Some Renesas SoCs, such as the RZ/G2L, require the USBHS core to
be explicitly deasserted from reset before register access is
possible.
Update the OTG probe to handle a bulk reset controller. To maintain
hardware stability, the reset is deasserted after clocks are
enabled in probe(), and asserted before clocks are disabled
in remove().
Update the error paths in probe to ensures clocks are disabled
if the reset initialization fails.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Michele Bisogno <micbis.openwrt@gmail.com>
The driver currently fails to unregister the USB gadget when the
device is removed or the driver is unbound. This leads to dangling
pointers in the UDC core and potential memory corruption.
Add a call to usb_del_gadget_udc() in the remove path to ensure
a clean teardown of the gadget interface.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Michele Bisogno <micbis.openwrt@gmail.com>
Commit ecba4380ad ("net: zynq_gem: Update the MDC clock divisor in the
probe function") changed zynq_gem_init() from a direct register write to
a read-modify-write pattern in order to preserve MDC clock divider bits.
However, the old speed selection bits (SPEED100/SPEED1000) are never
cleared before OR-ing in the new value.
When the PHY renegotiates at a different speed between successive calls
to zynq_gem_init() (e.g. link flapping from 1 Gbps to 100 Mbps on a
marginal cable), both SPEED100 and SPEED1000 end up set simultaneously
in NWCFG. This confuses the GEM hardware and no frames are received.
Fix by explicitly clearing both speed bits before merging the new
configuration, so only the currently negotiated speed is ever active.
Fixes: ecba4380ad ("net: zynq_gem: Update the MDC clock divisor in the probe function")
Signed-off-by: Rafał Hibner <rafal.hibner@secom.com.pl>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20260420074640.4036119-1-rafal.hibner@secom.com.pl
