Airoha PCS driver depends on ARCH_AIROHA, so it should not be built
by allyesconfig configuration.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Airoha switch mdio maybe used not only by GDM1, but also by other GDM
ports (ex: as21xxx phy connected to GDM2 port). So it's better probe
airoha switch mdio a bit early in the airoha_eth_probe() code.
Also remove useless eth_phy_set_mdio_bus() call and related code.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
This allows us to expose MMC devices to the host for easy
flashing via USB.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Primoz Fiser <primoz.fiser@norik.com>
Adjust the scan for default console stdio device to prefer the
currently selected serial device. This is useful in combination
with CONFIG_SERIAL_PROBE_ALL=y, in which case the system would
instantiate all serial devices as stdio devices in the order in
which they are listed in control DT. The currently selected serial
device may not be the first device listed in DT, in which case the
current console_init_r() implementation unexpectedly switches to
another serial console after listing stderr using "Err:" line, and
just before showing U-Boot shell, which is not the desired behavior.
The scan now iterates over the entire list of stdio devices. If the
current iterator stdio device is the current serial device, or there
is no input or output stdio device assigned to the input or output
stream yet, then the current iterator stdio device is assigned to that
stream. This way, the first suitable stdio device is assigned to the
stream, but the current serial console stdio device can override that
assignment.
As a small optimization, if the current iterator stdio device is the
current serial device and both input and output streams as assigned,
then the loop can terminate, because the current serial device has a
chance to be used as a stdio device at this point.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
As exposed by "make randconfig", we have an issue with the dependencies
for REGMAP (and xPL variants). As this is a library function, it should
always be selected and not depended on by other functionality. This is
largely done correctly today, so just correct the few outliers.
Acked-by: Anshul Dalal <anshuld@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have an issue with the dependencies
for USB_ISP1760. It depends on DM && OF_CONTROL being set and
functionally requires REGMAP. As part of fixing that issue, we change
"tristate" to "bool" and remove mentions of module support as that's not
a thing in U-Boot.
Reviewed-by: Marek Vasut <marek.vasut+usb@mailbox.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have an issue with the dependencies
for SPL_UNIT_TEST. In order to test SPL_DM_DEVICE_REMOVE we also need to
have ensured that SPL_DM is enabled, so select that as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have an issue with the dependencies
for SPL_TIMER. This depends not just on SPL but also SPL_DM to function,
so add that.
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have an issue with the dependencies
for PINCTRL_TH1520. It really needs to depend on PINCTRL_GENERIC rather
than select it, and PINCTRL_GENERIC in turn already depends on
PINCTRL_FULL.
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have an issue with the dependencies
for QCOM_GENI. The symbol PARTITION_TYPE_GUID depends on EFI_PARTITION
and this driver cannot function without both being set, so select that
as well.
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have an issue with the dependencies
for BUTTON_KEYBOARD. This needs to also depend on DM_GPIO, and then
select BUTTON as well as BUTTON_GPIO, in order to meet all its
requirements.
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have an issue around SPL_BLK_FS.
This is functionally a library type symbol that should be selected when
required and select what it needs. Have SPL_BLK_FS select SPL_FS_LOADER
and then SPL_NVME will now correctly select SPL_FS_LOADER via
SPL_BLK_FS.
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have an issue around SPL_UPL. This
depends on SPL_LIBGENERIC_SUPPORT indirectly. In turn, SPL_UPL_OUT needs
to next depend on SPL_UPL.
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have an issues around a number of
symbols in BOOT_DEFAULTS_CMDS. Due to the nature of how we currently
handle other networking related command options, we need to be testing
for "!NO_NET" (which is the symbol for no networking stack) or "NET ||
NET_LWIP" rather than CMD_NET alone. For consistency and clarity here
use "CMD_NET && !NO_NET" here.
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have an issue around how
SYSRESET_CMD_POWEROFF is typically selected. We cannot rely only on
CMD_POWEROFF as SYSRESET_CMD_POWEROFF must also be tested for its own
dependency of SYSRESET.
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have xPL_FIT select'ing
xPL_OF_CONTROL, and that in turn requires xPL_LIBGENERIC_SUPPORT. The
most reasonable solution here is to have xPL_FIT select
xPL_LIBGENERIC_SUPPORT.
Signed-off-by: Tom Rini <trini@konsulko.com>
The options to enable pre-load signature support (full U-Boot or in SPL)
must depend on FIT_SIGNATURE being enabled, and not select it.
Signed-off-by: Tom Rini <trini@konsulko.com>
Introduce new mode of relocation which relocates only data, not code.
This is mainly meant to relocate data to read-write portion of the RAM,
while the code remains in read-only portion of the RAM from which it is
allowed to execute. This split configuration is present on various secure
cores.
The result of the relocation is U-Boot running at its original address,
data relocated to the end of DRAM, but with added read-write area offset.
The U-Boot binary area is not reserved from the end of the DRAM in this
relocation mode, because U-Boot itself is not relocated.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The code in the __XSCALE__ section is unused, since there is no more
XScale support in U-Boot. Remove the stale code. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The ARM32 has PLx Privilege Levels instead of Exception Levels present
on ARM64. Introduce current_pl() function which reports the current PL
on ARM32.
Introduce current_el() for ARM32 as well and current_pl() for ARM64
which each call the other matching function. This is mainly mean to
allow code like this to compile and retain compile time code coverage:
if (IS_ENABLED(CONFIG_ARM64) && current_el() != 3) { ... }
if (!IS_ENABLED(CONFIG_ARM64) && current_pl() != 0) { ... }
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add a 'part dupcheck' subcommand that scans all block devices probed
in U-Boot and reports any partitions sharing the same PARTUUID or
PARTLABEL. This helps detect situations where the same disk image has
been flashed onto multiple boot devices (e.g., USB stick and UFS),
which can lead to unpredictable boot behavior. Duplicate
PARTUUIDs break UUID-based partition lookup in Linux, and duplicate
PARTLABELs cause the wrong partition to be silently selected in
bootscripts that reference partitions by name.
A single collection pass iterates over all block devices using
blk_foreach_probe() and records every partition that carries a UUID
or label into a dynamically allocated alist of struct part_seen
entries (UUID string, name string, device pointer, partition number).
Duplicates are detected by calling detect_duplicates() twice, once
for UUIDs and once for labels. Each call sorts the list with qsort()
using a comparator that places empty fields at the end, then performs
a single linear pass to identify consecutive equal entries as
duplicate groups. Each group is reported with the device name and
partition number of every copy, followed by a per-field summary
count. Per-field counts are used consistently in both the
duplicate-found and no-duplicates paths.
Example output (with duplicates):
=> part dupcheck
Warning: duplicate PARTUUID 1234abcd-01 (2 copies)
found on usb_mass_storage.lun0:1
found on ufs_scsi.id0lun0:1
Found 1 duplicate PARTUUID(s) (2 total copies) among 4 partitions
Warning: duplicate PARTLABEL primary (2 copies)
found on usb_mass_storage.lun0:1
found on ufs_scsi.id0lun0:1
Found 1 duplicate PARTLABEL(s) (2 total copies) among 4 partitions
Example output (mixed: UUID duplicates, no label duplicates):
=> part dupcheck
Warning: duplicate PARTUUID 1234abcd-01 (2 copies)
found on usb_mass_storage.lun0:1
found on ufs_scsi.id0lun0:1
Found 1 duplicate PARTUUID(s) (2 total copies) among 4 partitions
No duplicate PARTLABELs found (3 labels)
Example output (no duplicates):
=> part dupcheck
No duplicate PARTUUIDs or PARTLABELs found (4 UUIDs, 3 labels)
The CONFIG_CMD_PART_DUPCHECK Kconfig option (depends on
CMD_PART and BLK) controls inclusion of this subcommand and is
disabled by default.
Signed-off-by: John Toomey <john.toomey@amd.com>
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Refactor the dirty flag handling a little bit so an inline
function is called instead of directly stuffing a value into
the variable.
This allows variable that holds the flag to be completely removed
if its not used i.e. CONFIG_FAT_WIRTE=n
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
If no signature could be verified and the loop terminates, the iterator
'noffset' has no meaningful value so name yields NULL.
Signed-off-by: Ludwig Nussel <ludwig.nussel@siemens.com>
Commit 2092322b31 ("boot: Add fit_config_get_hash_list() to build
signed node list") removed printing the list of hashed nodes during
verification. Add it back to have a chance to compare the list when
debugging.
Signed-off-by: Ludwig Nussel <ludwig.nussel@siemens.com>
Pull request doc-2026-04-rc6
CI: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/29687
Documentation:
* TI boards
- fix OP-TEE args
- fix incorrect labels for boot switches
* Fix typo in pstore documentation.
* Fix document references pointing to replaced uImage.FIT.
* buildman: Add missing :: for examples.
* overlay-fdt-boot: .dtbos do not need load addresses.
* When building the documentation use sys.path.append for pytests.
As exposed by "make randconfig", CPU_MICROBLAZE uses select to
force-enable XILINX_MICROBLAZE0_PVR, but that symbol depends on
TARGET_MICROBLAZE_GENERIC. The select bypasses this dependency chain,
triggering a Kconfig warning:
WARNING: unmet direct dependencies detected for XILINX_MICROBLAZE0_PVR
Depends on [n]: MICROBLAZE [=y] && TARGET_MICROBLAZE_GENERIC [=n]
Selected by [y]:
- CPU_MICROBLAZE [=y] && CPU [=y] && MICROBLAZE [=y]
Change XILINX_MICROBLAZE0_PVR from select to depends on, so that the
CPU driver is only available when PVR support has been explicitly
enabled.
Fixes: 816226d27e ("cpu: add CPU driver for microblaze")
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/61ddd555f58ef5169c48b190423640d949e4aad1.1773764781.git.michal.simek@amd.com
The requirement that .dtbos have load addresses in the FIT image
vanished five years ago with
4c531d9f58 ("fit: Load DTO into temporary buffer and ignore load address")
Fix the documentation accordingly.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
CFG_WITH_SOFTWARE_PRNG=y was added as an OPTEE argument to workaround
some bugs related to TRNG which have been fixed now[1]. Therefore this
patch drops the redundant argument from the documentation.
[1]: e313f4765f
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Verdin AM62
Rather than having our "docs" build tagets modify PTYHONPATH, have
doc/conf.py append the required paths at runtime instead. This will
ensure that our builds from readthedocs will also find all of the
required files.
Signed-off-by: Tom Rini <trini@konsulko.com>
Fix 4 instances in buildman.rst where examples were missing :: for
proper formatting. Three cases just had a single : and in one case,
: didn't make grammatical sense, so it gets a stand-alone :: along
with fixing the indent.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Commit 488445cefa ("doc: Move FIT into its own directory") moved the
documentation in doc/uImage.FIT to doc/usage/fit, subsequently all
documents and example sources have been converted to reStructuredText.
Fix (almost) all of the remaining occurrences of the old path and
filenames across the tree.
The exception is doc/uImage.FIT/command_syntax_extensions.txt which
apparently has been removed entirely, or at least I was unable to
locate where that document is now.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Implement spl_load_image_sqfs() in spl code.
This will be used in MMC to read a file from a squashfs partition.
Also, loosen squashfs read checks on file size by not failing when a
bigger size than the actual file size is requested. (Just read the file)
This is needed for FIT loading, because the length is ALIGNed.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: João Marcos Costa <joaomarcos.costa@bootlin.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-tpm/-/pipelines/29677
Add a new fwumdata tool to allows users to read, display, and modify FWU
(Firmware Update) metadata from Linux userspace. It provides
functionality similar to fw_printenv/fw_setenv but for FWU metadata.
Users can view metadata, change active/previous bank indices, modify
bank states, and set image acceptance flags. Configuration is done via
fwumdata.config file.
The downstream Raspberry Pi uses two namings for the revD
SoC device trees, both bcm2712d0-rpi-5-b and bcm2712-d-rpi-5-b
but it seems upstream has settled on just the later, so lets
use that as it's the name that maps both upstream and downstream.
Fixes: c15a791972 ("board/raspberrypi: add bcm2712d0-rpi-5-b for Raspberry Pi 5")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
The msg.c file uses EIO macro defined in errno.h , include errno.h
to avoid build failure:
"
arch/arm/mach-bcm283x/msg.c: In function 'bcm2835_power_on_module':
arch/arm/mach-bcm283x/msg.c:73:25: error: 'EIO' undeclared (first use in this function)
73 | return -EIO;
| ^~~
"
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The dependency on fwu_mdata.h creates unnecessary configuration
requirements. To generate metadata V1, CONFIG_FWU_MDATA_V1 must be
enabled, which in turn requires enabling FWU_MULTI_BANK_UPDATE,
EFI_CAPSULE_ON_DISK, PARTITION_TYPE_GUID, and other unrelated configs.
This is not suitable for a simple standalone tool.
Additionally, even with the "-v 1" option to generate V1 metadata, the
tool will still include the firmware store description if
CONFIG_FWU_MDATA_V1 is not enabled. This structure should only be
present in metadata V2.
Replace the fwu_mdata.h dependency with the new fwumdata header to make
the tool compatible with both V1 and V2 without requiring any defconfig
changes. This also uses the access helper functions from the header to
eliminate code duplication.
Acked-by: Sughosh Ganu <sughosh.ganu@arm.com>
Tested-by: Sughosh Ganu <sughosh.ganu@arm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add a new fwumdata tool to allows users to read, display, and modify FWU
(Firmware Update) metadata from Linux userspace. It provides functionality
similar to fw_printenv/fw_setenv but for FWU metadata. Users can view
metadata, change active/previous bank indices, modify bank states, and set
image acceptance flags. Configuration is done via fwumdata.config file.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
