Initially just include the few regulators needed for the RB5 board.
Others can be added back as-needed.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
A lot of the features in here are only relevant when running
multi-threaded with interrupts. Drop everything except what we need to
run single-threaded with a single TCS (which is all the rpmh-rsc
framework in U-Boot supports).
Keep rpmh_write_async() for simplicity and make it wrap the regular
rpmh_write().
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Minor adjustments to fix building with U-Boot and work correctly as a
synchronous driver without interrupts. RPMh is fast enough that we can
get away with just firing off requests and assuming they complete.
U-Boot behaviour changes are annotated with a "U-Boot:" comment.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Rework the rpmh-rsc initialization to use U-Boot's driver model and
initialize cmd-db.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Since U-Boot is single threaded, we can avoid most of the complexity
that comes with handling more than one in-flight TCS. Drop all the rpmh
code associated with multi-threading as we'll instead wait for a
response on each TCS.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Keep the header pointer in the .data section so we don't initialize it
again after relocation, adjust cmd_db_get_header() to work with the
U-Boot API, and skip validating the header since all cmd-db users are
children of the rpmh-rsc and those children will only probe if cmd-db
initializes successfully.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Integrate cmd-db into the U-Boot driver model.
This is just a wrapper around an in-memory database, so we just need to
get the address and validate that cmd-db is there.
Since cmd_db_header will be stored in the .data section we can skip
bind if it's already set.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Due to our simpler rpmh-rsc driver and lack of debugfs, we don't need
quite a few cmd-db functions, just drop them.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/21728
- Conversions to DM_I2C and DM_SERIAL.
- Support for I2C3 and PWM1 for the imx6q clock driver.
- Improvements for udoo-neo
- Describe the i.MX93 CPU clocks in the devicetree to fix CPU clock printing
- Fix for SPI and NANC clk-imx8mn clock driver
Enabling CONFIG_CMD_PWM, and consequently CONFIG_DM_PWM, causes the pwm
command to fail due to a missing clock.
=> pwm enable 0 0
Enable clock-controller@20c4000 failed
Failed to enable per_clk
pwm: '0' not found
Command 'pwm' failed: Error -2
Note that it is trivial to also add the clocks for PWM2, PWM3, and PWM4.
However, I only tested PWM1 and thus only added the clock for that
signal.
Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com>
Commit 727fa4539c ("clk: Add support for I2C clocks on NXP's imx6q SoC
which use CCF") added I2C clocks for I2C1 and I2C2, but not I2C3.
Consequently, devices using I2C3 fail after enabling CONFIG_CLK_IMX6Q
and thus CONFIG_CLK. Therefore, this commit adds the last I2C clock.
Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com>
The osc_24m is the clock-output-name and not the one that
is used as internal name reference from the strcmp. The clock
that use osc_24m, will not be able to reparent it as they should.
We need anyway register the osc_24m clock fixed factor in the clock
tree.
Fixes: 710c4ffb89 ("clk: imx: clk-imx8mn add gpmi nand clocks")
Fixes: 85b1c11989 ("clk: imx: Add ECSPI to iMX8MN")
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
