Correct the assignment in board_fdt_blob_setup() to use *fdtp instead of
fdtp, ensuring the caller receives the correct FDT address. This
resolves an issue where the device tree pointer was not properly set due
to assigning to the local parameter rather than the dereferenced
pointer.
Fixes: 7c16ebba1e ("board: mpfs_icicle: implement board_fdt_blob_setup()/board_fit_config_name_match()")
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Use the ARM64 kernel booting register settings, defined in Linux
documentation Documentation/arch/arm64/booting.rst:
x0 = physical address of device tree blob (dtb) in system RAM.
so kernel can replace U-Boot in FIP without modification of BL31.
Use x0 for future TF-A version and keep x2 as fallback to be compatible
with previous version of TF-A BL31.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
This reverts commit d37641c61b.
Restore support for environment storage in EXT4 filesystem on eMMC boot.
The previous cleanup incorrectly removed this fallback option which is
needed for boards that store their environment in an EXT4 partition.
This configuration is OS-specific rather than board-dependent and should
remain as it is configurable via menuconfig. Even if it is not described
in ST defconfigs people may have enabled it in their defconfig.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Network packet buffers should be aligned to PKTALIGN. Add a compiler
attribute to ensure this.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
[jf: use __aligned(x) from <linux/compiler_attributes.h>]
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Once the DHCP exchange is complete, if we have an IP address for an NTP
server, set the ntpserverip environment variable accordingly. Although
not necessary to make the sntp command use that server (since it is
known internally to the lwIP stack), this makes the behavior in line
with the legacy NET stack. This is also consistent with exporting the
DNS servers etc.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Suggested-by: Michal Simek <michal.simek@amd.com>
When both CMD_DHCP and CMD_SNTP are enabled, one would expect the NTP
servers received by DHCP to be used by the sntp command by default. Fix
dhcp_loop() so that it is indeed the case.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Michal Simek <michal.simek@amd.com>
Now that SNTP is supported, enable SNTP debug traces when LWIP_DEBUG is
enabled. In particular, this allows to see which NTP servers are
received during DHCP.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Use regulator_set_enable_if_allowed() to avoid failure if regulator is
shared between multiple devices.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
The issue was a mismatch in return value conventions between functions:
- getvar_get_part_info() expects >= 0 for success
- fb_nand_lookup() returns 0 on success, 1 on failure (from
mtdparts_init and find_dev_and_part)
When partition didn't exist, fb_nand_lookup returned 1, but
fastboot_nand_get_part_info passed it directly to getvar_get_part_info,
which treated 1 >= 0 as success, causing has-slot to always return yes.
Fix by converting positive return values to -ENOENT in
fastboot_nand_get_part_info to match the expected error convention.
Signed-off-by: Chance Yang <chance.yang@kneron.us>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20250826-master-v2-1-30b787a2f9fd@kneron.us
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
For successful reset staggering pulse operation, reset pulse
override bit is set. Port overcurrent bit 1, which in reality
reflects PIPE power present signal is set to avoid giving
false information of Vbus status to HPS controller.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Some legacy USB mass storage devices during connection were
observed to have debounce issues. Hence, increasing the default
USB Hub debounce timeout value to handle this issue for devices
connected to Agilex5 boards.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
FIELD_GET() macro is used during EMAC clock source selection
for better code readability and maintainability.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Fix the incorrect bit masking and bit shift used to compute EMAC
control which in turn is used to select EMAC clock from EMAC
source A or B.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Update the driver to enable or disable the SDMMC clock via
clock driver model API instead of doing it in the driver itself.
This allows for scalability of the driver for various SoCFPGA
devices.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Update Agilex clock driver to support enabling or disabling
the peripheral clocks via clock driver model APIs.
The caller will pass the clock ID to this driver and the driver
will then proceed to manipulate the desired bit in the Agilex clock
manager peripheral PLL register based on the given clock ID.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
When the data cache (dcache) is disabled, calling related
status functions can lead to compilation errors due to
undefined references.
Adding a !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) check before
invoking dcache_status() (used in common/memsize.c:get_ram_size())
and mmu_status() (from arch/arm/include/asm/io.h).
Without this check, builds with dcache disabled will fail to compile.
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Adding the dcache flushing and invalidation in the smc_send_mailbox()
At the same time replace the use of u64 with uintptr_t to ensure
compatibility across different architectures and correct the
pointer arithmetic for buffer end address calculation.
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Linux kernel will fail to boot due to exceeding timeout trying to
probe I3C device.
Increasing the watchdog timeout 30 seconds will give enough time for
Linux to probe the I3C device and will be able to boot up successfully.
User is expected to fine tune the watchdog timeout for the complete
boot in production.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
The QSPI mailbox API function declarations (mbox_qspi_close and
mbox_qspi_open) in mailbox_s10.h were guarded by CONFIG_CADENCE_QSPI
preprocessor conditional. This prevented their prototypes from being
visible to code that may use the stub implementations when
CONFIG_CADENCE_QSPI is disabled.
Remove the CONFIG_CADENCE_QSPI preprocessor conditional so these functions
are always declared, regardless of the configuration. This avoids potential
build or linkage errors when stubs are used.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Agilex5 FPGA switch section in the handoff data is larger by 32 bytes
than the default value as these extra sections contains I3C0 and I3C1
register offsets and values with 4 bytes each.
This requires 4 more times of reading the FPGA switch section of the
handoff data to fully populate the handoff data table in the memory
during runtime.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Bit 3 of the seq2core register is no longer set to indicate
calibration completion. Instead, added polling of the seq2core
register until it reads 0b00000111, signaling that the Nios
processor has started the calibration process.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Compatibility check of IOSSM mailbox with U-Boot is performed
by verifying the mailbox specification version. If check fails,
appropriate error message is displayed.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Remove the current CONFIG_SYS_BOOTM_LEN in N5X VAB defconfig.
Previously, the size was set to 32MB, but due to larger kernel image,
64MB size is required. This 64MB configuration has been set as
default in the Kconfig.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
To ensure unintentional bugs occurring because of config changes
in master defconfig and its VAB variants, VAB defconfig files now
include the master defconfig and enable config values specific to
VAB functionality only.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
All SoCFPGA platforms are switching to CONFIG_WDT (driver
model for watchdog timer drivers) from CONFIG_HW_WATCHDOG. Status
of watchdog is enabled to assist with this switching.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
In order to circumvent CCU NOC issue in Agilex5, it is recommended
to disable cache allocation for reads. This prevents hang issues
caused by CCP (Common Cache Pipe) Fill Done FIFO overflow.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
While it is good that the "Licenses/" directory contains the text
for all licenses that are applicable to u-boot code, it is harder
to determine at a glance what the default and/or preferred license
is. While humans can look at the Licenses/README file, this is not
machine parseable, making it tricky for license detection tools to
automatically determine/report on the overall / aggregate u-boot
license.
The project previously had a top level COPYING file containing a
short blurb, followed by the GPL license text. This was removed
back in commit eca3aeb352 when
the "Licenses/" directory was introduced. For the benefit of
automated tools, it is helpful to retain a top level COPYING
file in the repository. Rather than duplicate the license text,
however, a symlink from the Licenses/gpl-2.0.txt file should
suffice.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Tom Rini <trini@konsulko.com>
`b4` is a commandline tool to make patch-based development easier.
Provide a .b4-config file to match U-Boot's development preference about
who is cc'd on patch submission.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
[trini: Reword slightly]
If reset property is missing in DT, then we get this warning:
designware_i2c@0: Can't get reset: -2
Avoid this by checking if reset DT property is present, first.
Fixes: 622597dee4 ("i2c: designware: add reset ctrl to driver")
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Pull request efi-2025-10-rc6
CI:
* https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/27745
Docs:
* Correct encodings for spl memory layout diagrams
* Suggest usage of KDOC_WERROR when building documentation
* Replace references to README.fdt-control
* Clarify precedence of environment locations
* Add documentation for the TI am335x_evm board
* Remove README.commands.itest
* Add a note about asking for feedback in the development process
UEFI:
* Cleanup UEFI Variables Kconfig menu
There are 3 options listed between choice/endchoice FILE/TEE/NO_STORE.
There is no reason to add other config with dependencies between
choice/endchoice because they can never be selected because they depends on
only that 3 options which can be selected.
That's why move additional configuration with dependency below choice
section.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Update documents 'README.fdt-control' reference to replacement 'control.rst':
doc/arch/nios2.rst
dts/Makefile
Also convert some adjacent pathname mentions to rST links where applicable
Fixes: 3e9fddfc4f "doc: Move devicetree control doc to rST"
Signed-off-by: E Shattow <e@freeshell.de>
It can be unclear to contributors what to do if they haven't gotten any
feedback on patches they have submitted. Add a sentence saying that if
they feel it's been too long without any comment, it's OK to reply
again.
Signed-off-by: Tom Rini <trini@konsulko.com>
The commit 284ef1bbce ("doc: memory: Add documentation for system
RAM") added documentation for U-Boot's memory usage along with diagrams
showcasing the SPL's memory usage. Although the SVGs for the diagrams
were improperly encoded.
Therefore, this patch fixes the older SVGs with one's with better
encoding and reduced size created using inkscape[1].
[1]: https://inkscape.org/
Reported-by: Alexander Dahl <ada@thorsis.com>
Fixes: 284ef1bbce ("doc: memory: Add documentation for system RAM")
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Since commit 5cf6a06a it is possible to have both text-based and
old-style C environment files. But so far the environment documentation
has not reflected this change. This commit fixes that.
Signed-off-by: Ricardo Simoes <ricardo.simoes@pt.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
