Recent addition of support for SDM660 inadvertently broke USB PHY power
on sequence on RB1/RB2 and others with following error:
starting USB...
Bus usb@4e00000: QUSB2PHY pll lock failed: status reg = 0
qcom-qusb2-phy phy@1613000: PHY: Failed to power on phy@1613000: -16.
Can't power on PHY0
probe failed, error -16
No USB controllers found
The root cause was the addition of flag se_clk_scheme_default which was
configured correctly for SDM660 but incorrect for all other supported
SoC. Fix that by properly assignment as per upstream Linux driver.
Fixes: 475497dc3c15 ("phy: Add SDM660 support to Qualcomm QUSB2 phy")
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by:
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250410080027.208674-3-sumit.garg@kernel.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
On v5 & v7 controllers, multiple mapping for different
Execution Environment exists, if the mapping owner is for
a different Execution Environment we can only read and
not write any data.
To allow us to find a Write mapping for our Execution
Environment, we can overwritte a mapping if we encounter
a new one which we own.
Implement this logic, the result is the same mapping
table as in Linux.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: caleb.connolly@linaro.org # sdm845
Link: https://lore.kernel.org/r/20250328-topic-sm8x50-spmi-fix-v1-4-a7548d3aef0d@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Andre Przywara <andre.przywara@arm.com> says:
C's implicit fallthrough behaviour in switch/case statements can lead to
subtle bugs. Quite some while ago many compilers introduced warnings in
those cases, requiring intentional fallthrough's to be annotated.
So far we were not enabling that compiler option, so many ambiguities
and some bugs in the code went unnoticed.
This series adds the required annotations in code paths that the first
stage of the U-Boot CI covers. There is a large number of cases left
in the libbz2 code. The usage of switch/case is borderline insane there,
labels are hidden in macros, and there are no breaks, but just goto's.
Upstream still uses very similar code, without any annotations. I still
am not 100% sure those are meant to fall through or not, and plan to do
further investigations, but didn't want to hold the rest of the patches
back. You can see for yourself by applying patch 18/18 and building for
sandbox64, for instance.
Because of this we cannot quite enable the warning in the Makefile yet,
but those fixes are worth regardless, and be it to increase readability.
Please note that those patches do not fix anything, really, they just add
those fallthrough annotations, so the series is not really critical.
Link: https://lore.kernel.org/r/20250327153313.2105227-1-andre.przywara@arm.com
The raw NAND flash code uses an implicit switch/case fallthrough to
share code when dealing with different ECC modes, and also when handling
some read command.
Add our "fallthrough;" statement-like macro before the respective labels
in the NAND code, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
This copies the fallthrough annotations that the original kernel code
gained, before this function got refactored there.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Michael Trimrachi <michael@amarulasolutions.com>
The SPI NOR code uses an implicit switch/case fallthrough when checking
different vendors to determine how to deal with extended addressig modes.
Add our "fallthrough;" statement-like macro before some label in the
4-byte addressing mode code, to avoid a warning when GCC's
-Wimplicit-fallthrough warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The UBI code uses an implicit switch/case fallthrough when handling two
related cases of bad header errors. Also there is a switch/case for unit
prefix handling (G/M/K), which accumulates multiplications.
Add our "fallthrough;" statement-like macro before the respective labels
in both cases, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
The E1000 driver uses an implicit switch/case fallthrough for sharing
some code supporting different PHYs.
Add our "fallthrough;" statement-like macro before the two labels in
e1000_set_phy_type(), to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The generic DM video code uses an implicit switch/case fallthrough to
provide fallback code paths when certain colour depths are not enabled.
Add our "fallthrough;" statement-like macro to the video_fill() function
to avoid a warning when GCC's -Wimplicit-fallthrough warning option is
enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The USB XHCI code uses an implicit switch/case fallthrough to share code
for handling full speed and low speed transfers.
Add our "fallthrough;" statement-like macro before the second label in
the XHCI code, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The USB OCHI code uses an implicit switch/case fallthrough after checking
for valid descriptor IDs.
Add our "fallthrough;" statement-like macro before the default branch in
the OHCI code, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The Allwinner sun8i EMAC driver uses an implicit switch/case fallthrough
when setting up the MAC/PHY communication protocol, to handle the case
when RMII is requested, but would not be supported by the hardware.
Add our "fallthrough;" statement-like macro before the default branch in
sun8i_emac_set_syscon(), to avoid a warning when GCC's
-Wimplicit-fallthrough warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The fastboot command handling uses an implicit switch/case fallthrough
when receiving the OEM_CONSOLE command, but when this command is not
enabled in Kconfig, to report this command as unknown.
Add our "fallthrough;" statement-like macro before the default branch in
the fastboot code, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Even though we seem to catch POWEROFF and EFSCLEAR commands in the THOR
protocol request handling, we ultimately do not seem to handle them
(apart from sending a response), so those commands still print an error
message.
Annotate the switch/case fallthrough in this case, to make this clear to
the compiler.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
In the case of a memory allocation error, the ahci_port_start() function
tries to free the `pp' pointer.
This pointer was not dynamically allocated but does in fact point to an
element of the port[] array member of the struct ahci_uc_priv.
Remove the erroneous call to free() to fix this.
Fixes: 4782ac80b0 ("Add AHCI support to u-boot")
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jason Jin <jason.jin@freescale.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Note that this undoes the changes of commit cf6d4535cc ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
Currently in j721e_init.c we check which firewalls to remove using
the board configuration (e.g CONFIG_TARGET_J721E_R5_EVM). We do this
as J721e and J7200 have different IP and firewalls but use the same
SoC definition (SOC_K3_J721E) even though they are different SoCs.
The idea was they would be similar enough that they both could use
the same SoC config to help with common code sharing. Board checks
would then be used differentiate.
This has grown far too messy to maintain any more, especially now
that there is more than one board using J721e (EVM, SK, Beagle AI64).
As differentiation is done based on board, every one of these boards
would have to have checks added for them. Instead let's split J7200
support out from J721e like how normal new SoC support is done.
This patch touches several subsystems and could not be split much better
as when we add SOC_K3_J7200 we want to make use of it in all spots that
once used the combined SOC_K3_J721E so we can turn off SOC_K3_J721E when
building for J7200 boards.
Signed-off-by: Andrew Davis <afd@ti.com>
Harsha Vardhan V M <h-vm@ti.com> says:
This patch series introduces the fuse writebuff sub-system command and
makes improvements to the existing fuse implementation by removing the
custom string functions. The patches are required to be applied in
sequence.
The series consists of the following changes:
Patch 1 removes custom string functions and replaces them with standard
string functions.
Patch 2 introduces fuse.rst documentation for fuse commands.
Patch 3 introduces the fuse writebuff sub-system command, allowing to
write a structured buffer in memory to fuses, and implementing the
necessary function calls.
Patch 4 enables the fuse sub-system in the K3 platform.
Patch 5 updates the fuse.rst documentation to include details about the
new fuse writebuff command.
These changes aim to improve the fuse sub-system by the removal of
custom string functions and the addition of the fuse writebuff
command improves fuse programming workflows by allowing to write a
structured buffer in memory to efuses.
Link: https://lore.kernel.org/r/20250319084714.335777-1-h-vm@ti.com
Add K3_FUSE config option to add and enable fuse sub-system
implementation function calls.
Signed-off-by: Harsha Vardhan V M <h-vm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass <sjg@chromium.org> says:
The membuff implementation curently has no tests. It also assumes that
head and tail can never correspond unless the buffer is empty.
This series provides a compile-time flag to support a 'full' flag. It
also adds some tests of the main routines.
The data structure is also renamed to membuf which fits better with
U-Boot.
There may be some cases in the code which could be optimised a little,
but the implementation is functional.
Link: https://lore.kernel.org/r/20250318152059.1464369-1-sjg@chromium.org
The double 'f' is not necessary and is a bit annoying as elsewhere in
U-Boot we use 'buf'. Rename all the functions before it is used more
widely.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass <sjg@chromium.org> says:
U-Boot can start and boot an OS in both qemu-x86 and qemu-x86_64 but it
is not perfect.
With both builds, executing the VESA ROM causes an intermittent hang, at
least on some AMD CPUs.
With qemu-x86_64 kvm cannot be used since the move to long mode (64-bit)
is done in a way that works on real hardware but not with QEMU. This
means that performance is 4-5x slower than it could be, at least on my
CPU.
We can work around the first problem by using Bochs, which is anyway a
better choice than VESA for QEMU. The second can be addressed by using
the same descriptor across the jump to long mode.
With an MTRR fix this allows booting into Ubuntu on qemu-x86_64
In v3 some e820 patches are included to make booting reliable and avoid
ACPI tables being dropped. Also, several MTTR problems are addressed, to
support memory sizes above 4GB reliably.
Link: https://lore.kernel.org/all/20250315142643.2600605-1-sjg@chromium.org/
The existing QEMU implementation mostly ignored BLOBLIST_TABLES and
allocates the bulk of the tables with malloc(). Update it to place all
tables in the bloblist. Since QEMU declares a size of 128KB regardless
of the size of its tables, this requires a larger bloblist.
Fix up the e820 table to handle this, keeping the old code as an option
for now, to assist with any future bug-fixing.
Signed-off-by: Simon Glass <sjg@chromium.org>
Manorit Chawdhry <m-chawdhry@ti.com> says:
The series adds support for J742S2 family of SoCs. Also adds J742S2 EVM
Support and re-uses most of the stuff from the superset device J784s4.
This device is a subset of J784S4 and shares the same memory map and
thus the code is being reused from J784S4 to avoid duplication.
It initially cleans up the J784s4 and AM69 files so that they can be
re-usable for j742s2 and then it introduces J742S2.
The DT for the following SoC will be coming to U-boot during 6.13 Sync
so the series is kept as RFC till then.
Here are some of the salient features of the J742S2 automotive grade
application processor:
The J742S2 SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration in automotive, ADAS and industrial
applications requiring AI at the network edge. This SoC extends the K3
Jacinto 7 family of SoCs with focus on raising performance and
integration while providing interfaces, memory architecture and compute
performance for multi-sensor, high concurrency applications.
Some changes that this devices has from J784S4 are:
* 4x Cortex-A72 vs 8x Cortex-A72
* 3x C7x DSP vs 4x C7x DSP
* 4 port ethernet switch vs 8 port ethernet switch
* 2 DDR controller vs 4 DDR controller
Test logs:
https://gist.github.com/manorit2001/f7df0e8cca1e9973b4361f0559c6f53d
Link: https://lore.kernel.org/r/20250317-b4-upstream-j742s2-v4-0-4ba88bfd357a@ti.com
Re-use j784s4 clocks and power domains for j742s2 family of device.
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
J742S2 has the same part number as J784S4 but JTAG_DEVICE_ID has a
PKG bit that tells about J742S2.
Add support for reading JTAG_DEVICE_ID and set family as J742S2 based
on that.
Link: https://www.ti.com/lit/pdf/spruje3 (TRM)
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
