Rasmus Villemoes <ravi@prevas.dk> says:
While looking through list.h, I saw that the regular list_* helpers
(and one of the hlist_* ones) still contain the prefetch() that was
removed in linux 14 years ago. It doesn't do anything, but makes the
macros harder to read, so get rid of it, and the fallback, no-op
definition that they relied on. That requires removing a few uses
outside list.h as well.
checkpatch warns about some whitespace issues in list.h, but as I've
copied whole kerneldoc+#define blocks directly from the linux kernel,
I think it's better to just accept that so that we don't introduce
needless diffs. The "macro argument reuse" arguments should also be
ignored, as e.g. the "member" arguments are obviously always just bare
identifiers, and the "pos" arguments must be assigned to multiple
times.
Link: https://lore.kernel.org/r/20250507121246.518691-1-ravi@prevas.dk
None of the list helpers use prefetch() anymore, and no C code relies
on getting this definition from list.h. In any case, such an arch/cpu
specific thing does not belong in a header that just consists of cpp
helper macros.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
The use of prefetch() in these list helpers was dropped back in 2011
in linux (e66eed651fd1 ("list: remove prefetching from regular list
iterators")). No arch in U-Boot defines any actual prefetch(), and as
the referenced commit says, it's usually not a win anyway.
Whole-sale sync of list.h is not really feasible, but we can
synchronize the macros containing a prefetch() with their linux
implementations as of v6.15-rc5, also importing the various helpers
needed, e.g. list_is_head() and list_next_entry().
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Sync bitfield.h header with Linux 6.15 version. Mainly is to permit the
introduction of FIELD_PREP_CONST. The bug.h header changed to
build_bug.h doesn't cause any regression as we also ship split header
similar to how it's done with in Linux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
E Shattow <e@freeshell.de> says:
Make consistent use of lowercase hexadecimal prefix '0x' throughout U-Boot.
There are a few remaining uses of uppercase 'X' to denote hexadecimal prefix
or placeholder in documentation and error messages.
External devicetree-rebasing dts/upstream and the generated code of
xilinx/zynq are ignored for the series.
Link: https://lore.kernel.org/r/20250606224558.1117422-1-e@freeshell.de
This function is currently a misnomer at times as we have cases where it
passes arguments to the image. In preparation for making that be a more
common case rename this function to jump_to_image(...). In order to do
this, rename jump_to_image in board_init_r(...) to jumper so that we do
not have a conflict.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Reword the commit message, adding missing cases of
jump_to_image_no_args()]
Signed-off-by: Tom Rini <trini@konsulko.com>
Quentin Schulz <foss+uboot@0leil.net> says:
Out of all the dev_read_*_default functions, only two do not properly
use the type as argument and return type: dev_read_u32_default and
dev_read_s32_default. They both use int instead of u32/s32.
Considering that it's generally not guaranteed that an int is 4 bytes
but also for consistency sake, let's have them use the expected type.
Note that I have not tested this, just stumbled upon that inconsistency
by chance.
Link: https://lore.kernel.org/r/20250528-dev_read_x32_default-v1-0-6ab1734dd7a2@cherry.de
dev_read_s32_default is for getting an s32 from a Device Tree property
and allows to take a default value if that property is missing.
Considering it calls ofnode_read_u32_default which takes a u32 and
returns a u32, it should do the same instead of using an int, especially
considering that int size is typically architecture-specific, as opposed
to s32/u32.
s32 and u32 being the same size, dev_read_s32* functions calling
ofnode_read_u32_default shouldn't be an issue (at the type level at
least) as the information will be stored appropriately in 4B regardless
of the sign.
This incidentally matches all other dev_read_*_default functions.
Fixes: a1b17e4f4c ("dm: core: Add a function to read into a unsigned int")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
dev_read_u32_default is for getting a u32 from a Device Tree property
and allows to take a default value if that property is missing.
Considering it calls ofnode_read_u32_default which takes a u32 and
returns a u32, it should do the same instead of using an int, especially
considering that int size is typically architecture-specific, as opposed
to u32.
This incidentally matches all other dev_read_*_default functions (except
dev_read_s32_default which will be tackled in the next commit).
Fixes: 47a0fd3bad ("dm: core: Implement live tree 'read' functions")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add support for generating STM32 Image V2.0, which is used by STM32MP13xx.
The image header layout is similar to STM32MP15xx STM32 Image V1.0, but is
different enough to justify duplicate functions to generate the v2 image.
This code at least attempts to align the V1 and V2 image handling where
possible.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Add SPL support and clock tree init to STM32MP13 RCC driver. This
consists of two parts, make SCMI into an optional dependency and
add clock tree initialization. The SCMI dependency is made optional
first by registering the few core clock provided by SCMI clock as
fixed clock, and second by letting the clock core parse out the
clock configuration from SoC registers. The clock initialization
code is derived from STM32MP15xx clock tree initialization code,
which is almost identical, except for the use of new PLL2000 for
PLL1 on STM32MP13xx .
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Implement STM32MP25 reset drivers using stm32-core-reset API.
This reset stm32-reset-core API and will be able to use DT binding
index started from 0.
This patch also moves legacy reset into stm32 directory reset.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Add a new config CONFIG_CLK_AUTO_ID to support a unique clk id
for all the clock providers, managed by clk uclass, when the clock
reference arg[0] is the same.
When the CONFIG is activated, the clock id is limited to the lower
CLK_ID_SZ = 24 bits in default clock xlate function
and the sequence number + 1 of the clk provider device is
added for the 8 higher bits.
We use sequence number + 1 to avoid the "dummy" clock id = 0,
used for invalid clock when CCF is activated.
When this config is activated, the new function clk_get_id()
should be used to get back the internal reference to clock
for the each clock provider.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Since clock protocol 2.0, SCMI specification add an option field
"clock_enable_delay" to CLOCK_ATTRIBUTES command.
scmi_read_resp_from_smt() will return an error ("Buffer too small") as
the message length coming from the SCMI server is not the same as expected.
So implement a condition to SCMI clock protocol version to change the
length of the expected message.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Add Retronix R-Car V4H Sparrow Hawk board based on Renesas R-Car V4H ES3.0
(R8A779G3) SoC. This is a single-board computer with single gigabit ethernet,
DSI-to-eDP bridge, DSI and two CSI2 interfaces, audio codec, two CANFD ports,
micro SD card slot, USB PD supply, USB 3.0 ports, M.2 Key-M slot for NVMe SSD,
debug UART and JTAG.
DT is imported from Linux next commit:
a719915e76f2 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
As part of moving to using OF_UPSTREAM and so the upstream dt-bindings
headers we have a number of these headers that are in our include
directory and while they are not a strict subset of the upstream version
of the headers, all platforms build with the new headers as well. We can
remove the copies under include/dt-bindings now to prevent future
conflicts.
Signed-off-by: Tom Rini <trini@konsulko.com>
Aside from SPDX tags, the only difference between our version of this
header and upstream is that BCM6318_RST_HOSTMIPS was defined to 11 (the
same as BCM6318_RST_PHYMIPS) and is now defined to 12.
Signed-off-by: Tom Rini <trini@konsulko.com>
As part of moving to using OF_UPSTREAM and so the upstream dt-bindings
headers we have a number of these headers that are in our include
directory and differ in being a strict subset of what is found upstream.
We can safely remove the copies under include/dt-bindings now to prevent
future conflicts.
Signed-off-by: Tom Rini <trini@konsulko.com>
As part of moving to using OF_UPSTREAM and so the upstream dt-bindings
headers we have a number of these headers that are in our include
directory and differ only in combinations of spacing changes and/or
switching to SPDX license tags. We can safely remove the copies under
include/dt-bindings now to prevent future conflicts.
Signed-off-by: Tom Rini <trini@konsulko.com>
As part of moving to using OF_UPSTREAM and so the upstream dt-bindings
headers we have a number of these headers that are in our include
directory and are currently identical to the versions in dts/upstream.
We can remove these now to prevent future conflicts.
Signed-off-by: Tom Rini <trini@konsulko.com>
As part of moving to using OF_UPSTREAM and so the upstream dt-bindings
headers we have a number of these headers that are in our include
directory and not referenced by any code outside of dts/upstream. We can
remove these now to prevent future conflicts.
Signed-off-by: Tom Rini <trini@konsulko.com>
In case DEBUG UART is not used, define dummy macros replacing
the actual function implementations that will not be available.
This allows to compile code and avoid linker errors.
Redefine the DEBUG_UART_FUNCS macro if DEBUG UART is not available,
to avoid compilation errors.
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Permit to select a bootmenu entry with a key shortcut. This is
especially useful in production or testing scenario to automate flashing
procedure or testing procedure.
The boot entry are changed to append the shortcut key to it.
Example:
1. Run default boot command.
2. Boot system via TFTP.
3. Boot production system from NAND.
4. Boot recovery system from NAND.
5. Load production system via TFTP then write to NAND.
6. Load recovery system via TFTP then write to NAND.
7. Load BL31+U-Boot FIP via TFTP then write to NAND.
8. Load BL2 preloader via TFTP then write to NAND.
9. Reboot.
a. Reset all settings to factory defaults.
0. Exit
0 is always reserved for Exit to console.
On pressing the keyboard key 2, the bootmenu entry 2 is selected and
executed.
Up to 34 key shortcut (0 excluded as reserved) are supported from 1-9
and a-z.
If a shortcut key not present in the bootmenu list is pressed, it is
simply ignored and eventually the autoboot is interrupted.
Capital A-Z are converted to lower a-z and the related option is
selected.
Suggested-by: Weijie Gao <weijie.gao@mediatek.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Petr Štetiar <ynezz@true.cz>
The kernel added new size definitions and substituted the
boilerplate/reference to the license with a SPDX identifier.
Drop a local SZ_8G definition in MediaTek MT7988 SoC board file.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tom Rini <trini@konsulko.com> says:
Hey all,
Related to my other series I've posted recently on cleaning up some
headers, this series here is the result of at least lightly auditing the
#includes used in include/[a-m]*.h. This ignores subdirectories, as at
least in part I think the top-level includes we've constructed are the
most likely places to have some extra transitive include paths. I'm sure
there's exceptions and I'll likely audit deeper once this first pass is
done. This only gets as far as "include/m*.h" because I didn't want this
to get too big. This also sets aside <miiphy.h> and <phy.h>. While
miiphy.h does not directly need <phy.h> there are *so* many users and I
think I had half of the tree just about not building when I first tried.
It might be worth further investigation, but it might just be OK as-is.
Link: https://lore.kernel.org/r/20250521230119.2084088-1-trini@konsulko.com
There are only a few things found in <mtd.h> today. Go through and audit
the C files which include <mtd.h> and remove it when not required. Then,
add it to the files which had either missed it or had an indirect
inclusion of it.
Signed-off-by: Tom Rini <trini@konsulko.com>
This file does not need <linux/sizes.h> nor <linux/compiler.h> so remove
them. This exposes however that a number of other files had been relying
on this implicit include for <linux/sizes.h> so add that where needed.
Signed-off-by: Tom Rini <trini@konsulko.com>
At this point in time, <ide.h> provides the IDE_BUS macro and the
function prototype for ide_set_reset, which is used with IDE_RESET. The
only files which should include this header are the ones that either use
that macro or that function. Remove <blk.h> from <ide.h> and remove
<ide.h> from places which do not need it.
Signed-off-by: Tom Rini <trini@konsulko.com>
This file does not need <asm/cache.h> so remove it. However the file
common/spl/spl_fat.c does need it, so add it there.
Signed-off-by: Tom Rini <trini@konsulko.com>
In include/efi_loader.h we do not directly need <log.h>, <part_efi.h>,
<pe.h> nor <linux/oid_registry.h> so remove them. In include/efi_tcg2.h
we make use of <part_efi.h> but did not include it, so add it directly.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
This file does not need a forward declaration of 'struct list_head' as
it includes <linux/list.h> so remove it.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
This file does not need <pc.h> but does directly need
<linux/types.h>. Furthermore, arch/x86/lib/bios.c was getting <pci.h>
via <bios_emul.h> so add it there.
Signed-off-by: Tom Rini <trini@konsulko.com>
