Loading a FIT is useful for other VBE methods, such as ABrec. Create a
new function to handling reading it.
Signed-off-by: Simon Glass <sjg@chromium.org>
VBE is currently quite careful with function arguments because it is
used in VPL which cannot be updated after manufacture. Bugs can cause
security holes.
Unfortunately this adds to code size.
In several cases we are reading values from a devicetree which is part
of U-Boot (or at least VPL) and so known to be good. Also, in several
places, getting bad values does not matter.
So change a few checks to assert() to reduce code size.
Signed-off-by: Simon Glass <sjg@chromium.org>
Pass the private data instead of the device, to help the compiler
optimise better. This saves 16 bytes of code on pinecube (rk3288)
Signed-off-by: Simon Glass <sjg@chromium.org>
Pass a struct udevice instead of the descriptor structure, since this is
the native argument for blk_read()
Signed-off-by: Simon Glass <sjg@chromium.org>
Move a few things into a new, common header file so that vbe-simple can
share code with the upcoming abrec.
Put struct simple_nvdata in it and rename it.
Signed-off-by: Simon Glass <sjg@chromium.org>
We should not be using the old blk_d...() interface, is only there to
aid migration to driver model.
Move to blk_read() instead.
Changes in v2:
- Split patch into several pieces
Signed-off-by: Simon Glass <sjg@chromium.org>
lmb_alloc_base() is just calling lmb_alloc_base_flags() with LMB_NONE.
There's not much we gain from this abstraction, so let's remove the
former add the flags argument to lmb_alloc_base() and make the code
a bit easier to follow.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
lmb_reserve() is just calling lmb_reserve_flags() with LMB_NONE.
There's not much we gain from this abstraction.
So let's remove the latter, add the flags argument to lmb_reserve()
and make the code a bit easier to follow.
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
LMB flags is not an enum anymore. It's currently used as a bitmask
in various places of our code. So make it a u32 which is more
appropriate when dealing with masks.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
VBE uses a crc8 checksum to verify that the nvdata is valid, so make
sure it is available if VBE is enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
With VBE we want to use FIT in all phases of the boot. Add Kconfig
options to support this.
Disable the options for sandbox_vpl for now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some code has crept in which ignores this parameter. Fix this and add a
little debugging.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: b1307f884a ("fit: Support compression for non-kernel components (e.g. FDT)")
The name of the bootdev device is not that important, particular in SPL.
Save a little code space by using a simpler name.
Signed-off-by: Simon Glass <sjg@chromium.org>
When the best-match feature fails to find something, use the provided
config name as a fallback. The allows SPL to select a suitable config
when best-match is enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
This patch was written before the XPL change-over. Update the Makefile
condition to the new way.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: ae3b5928d6 ("x86: coreboot: Allow building an expo for...")
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
This reverts commit 1fdf53ace1, reversing
changes made to e5aef1bbf1.
I had missed that this caused too much size growth on rcar3_salvator-x.
Signed-off-by: Tom Rini <trini@konsulko.com>
VBE uses a crc8 checksum to verify that the nvdata is valid, so make
sure it is available if VBE is enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
With VBE we want to use FIT in all phases of the boot. Add Kconfig
options to support this.
Disable the options for sandbox_vpl for now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some code has crept in which ignores this parameter. Fix this and add a
little debugging.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: b1307f884a ("fit: Support compression for non-kernel components (e.g. FDT)")
The name of the bootdev device is not that important, particular in SPL.
Save a little code space by using a simpler name.
Signed-off-by: Simon Glass <sjg@chromium.org>
When the best-match feature fails to find something, use the provided
config name as a fallback. The allows SPL to select a suitable config
when best-match is enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
The boot_fdt_add_mem_rsv_regions() function can be called twice, e.g.
first time during the board init (as a part of LMB init), and then when
booting the OS with 'booti' command:
lmb_add_region_flags
lmb_reserve_flags
boot_fdt_reserve_region
boot_fdt_add_mem_rsv_regions
^
|
+-----------------------+
| (1) | (2)
lmb_reserve_common image_setup_linux
lmb_init ...
initr_lmb do_booti
board_init_r 'booti'
That consequently leads to the attempt of reserving the same memory
areas (described in the 'reserved-memory' dts node) in LMB. The
lmb_add_region_flags() returns -EEXIST error code in such cases, but
boot_fdt_reserve_region() handles all negative error codes as a failure
to reserve fdt memory region, printing corresponding error messages,
which are essentially harmless, but misleading. For example, this is the
output of 'booti' command on E850-96 board:
=> booti $loadaddr - $fdtaddr
...
ERROR: reserving fdt memory region failed
(addr=bab00000 size=5500000 flags=2)
ERROR: reserving fdt memory region failed
(addr=f0000000 size=200000 flags=4)
...
Starting kernel ...
The mentioned false positive error messages are observed starting with
commit 1d9aa4a283 ("lmb: Fix the allocation of overlapping memory
areas with !LMB_NONE"), which removes the check for the already added
memory regions in lmb_add_region_flags(), making it return -1 for
!LMB_NONE cases. Another commit 827dee587b ("fdt: lmb: add reserved
regions as no-overwrite") changes flags used for reserving memory in
boot_fdt_add_mem_rsv_regions() from LMB_NONE to LMB_NOOVERWRITE. So
together with the patch mentioned earlier, it makes
lmb_add_region_flags() return -1 when called from
boot_fdt_reserve_region().
Since then, the different patch was implemented, returning -EEXIST error
code in described cases, which is:
lmb: Return -EEXIST in lmb_add_region_flags() if region already added
Handle -EEXIST error code as a normal (successful) case in
lmb_reserve_flags() and don't print any messages.
Fixes: 1d9aa4a283 ("lmb: Fix the allocation of overlapping memory areas with !LMB_NONE")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The current implementation is reading the whole partition for boot and
vendor_boot image which can be long following the size of the
partition or the time to read blocks (driver/SoC specific).
For example with mediatek mt8365 EVK board, we have a 64MiB boot
partition and the boot image flashed in this partition is only 42MiB.
It takes ~8-9 secs to read the boot partition.
Instead we can retrieved the boot image and vendor boot image size
with these new functions:
- android_image_get_bootimg_size
- android_image_get_vendor_bootimg_size
Use these information and read only the necessary.
By doing this with mt8365 EVK board, we read boot image in ~5 secs.
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20241121-bootmeth-android-part-sizes-v1-1-25760bbd0f08@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
extlinux_read_bootflow() allocates a buffer to read from file system
without any alignment.
But for some block devices which transfer data via DMA, ARCH_DMA_MINALIGN
alignment is required. For example, due to misaligned buffer, the below
boot failure is observed.
=> boot
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
** Booting bootflow 'mmc@2194000.bootdev.part_1' with extlinux
Ignoring unknown command: �D���D��
Boot failed (err=-14)
Change the buffer alignment to ARCH_DMA_MINALIGN.
Fixes: 31aefaf89a ("bootstd: Add an implementation of distro boot")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Tested-by: Javier Fernandez Pastrana <javier.pastrana@linutronix.de>
When calling decode_addr_size() we must pass the size of the device-tree
property and not sizeof(void *).
Fixes: 90469da3da ("upl: Add support for reading a upl handoff")
Addresses-Coverity-ID: 510459 Wrong sizeof argument
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Move this function from the EFI bootmeth to the common efi_helper file.
No functional change is intended.
Signed-off-by: Simon Glass <sjg@chromium.org>
This patch adds a new callback named need_reprint for menu.
The need_reprint will be called before printing the menu. If the
callback exists and returns FALSE, menu printing will be canceled.
This is very useful if the menu was not changed. It can save time
for serial-based menu to handle more input data.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Coreboot provides the CMOS layout in the tables it passes to U-Boot.
Use that to build an editor for the CMOS settings.
Signed-off-by: Simon Glass <sjg@chromium.org>
The function description says this should return 0 or -1 on failures.
When regions coalesce though this returns the number of coalescedregions
which is confusing and requires special handling of the return code.
On top of that no one is using the number of coalesced regions.
So let's just return 0 on success and adjust our selftests accordingly
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
The boot_fdt_add_mem_rsv_regions() function reserves the memreserve and
reserved-memory regions. These regions are being set with the LMB_NONE
flag which allows overwriting and re-using the regions. This was fine
earlier when the LMB memory map was local and not enforced
globally. But that is no longer the case. Mark these regions as
LMB_NOOVERWRITE so that they cannot be used.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reported-by: Vaishnav Achath <vaishnav.a@ti.com>
Patrick Rudolph <patrick.rudolph@9elements.com> says:
Based on the existing work done by Simon Glass this series adds
support for booting aarch64 devices using ACPI only.
As first target QEMU SBSA support is added, which relies on ACPI
only to boot an OS. As secondary target the Raspberry Pi4 was used,
which is broadly available and allows easy testing of the proposed
solution.
The series is split into ACPI cleanups and code movements, adding
Arm specific ACPI tables and finally SoC and mainboard related
changes to boot a Linux on the QEMU SBSA and RPi4. Currently only the
mandatory ACPI tables are supported, allowing to boot into Linux
without errors.
The QEMU SBSA support is feature complete and provides the same
functionality as the EDK2 implementation.
The changes were tested on real hardware as well on QEMU v9.0:
qemu-system-aarch64 -machine sbsa-ref -nographic -cpu cortex-a57 \
-pflash secure-world.rom \
-pflash unsecure-world.rom
qemu-system-aarch64 -machine raspi4b -kernel u-boot.bin -cpu cortex-a72 \
-smp 4 -m 2G -drive file=raspbian.img,format=raw,index=0 \
-dtb bcm2711-rpi-4-b.dtb -nographic
Tested against FWTS V24.03.00.
Known issues:
- The QEMU rpi4 support is currently limited as it doesn't emulate PCI,
USB or ethernet devices!
- The SMP bringup doesn't work on RPi4, but works in QEMU (Possibly
cache related).
- PCI on RPI4 isn't working on real hardware since the pcie_brcmstb
Linux kernel module doesn't support ACPI yet.
Link: https://lore.kernel.org/r/20241023132116.970117-1-patrick.rudolph@9elements.com
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22989
- Remove unneeded USB board code and fix reset on mx6ul_14x14_evk.
- Update fastboot buffer size/address for verdin-imx8m{m|p}.
- Fix imxrt1050-evk boot and convert it to standard boot.
- Fix imx8qxp-mek and imx8qm-mek boot.
- Add support for the i.MX93 9X9 QSB board.
- Make livetree API to work on i.MX.
- Set sane default value for i.MX8M SPL_LOAD_FIT_ADDRESS.
- Deduplicate DH i.MX8MP/i.MX6 DHSOM defconfigs.
- Select default TEXT_BASE for i.MX6/i.MX7.
- Several updates for DH i.MX8MP DRC02.
