Simon Glass <sjg@chromium.org> says:
This series reworks the FIT test (test_fit.py) to make it easier to
maintain and extend. It fixes the buildconfigspec so the test actually
runs on sandbox, avoids unnecessary U-Boot restarts, renames the main
test for easier selection, adds a missing-kernel check, fixes Python
warnings, converts the test to use a class, splits into separate test
functions, and adds Sphinx documentation.
Link: https://lore.kernel.org/r/20260413130007.1987326-1-sjg@chromium.org
Add a Sphinx automodule page for test_fit.py so it appears in the pytest
documentation alongside the other test modules. The index already uses a
glob pattern, so this is picked up automatically.
Signed-off-by: Simon Glass <sjg@chromium.org>
These files are now auto-generated by the binman_docs Sphinx extension
during the doc build, so the committed copies and their symlinks in
doc/develop/package/ are no longer needed.
Update binman.rst to reference the Sphinx extension instead of the
manual generation commands.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rebased to apply file deletions cleanly.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Fix the link to the 2026.04 stats page. It was likely copied from the
2026.01 line below and not updated.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Commit 488445cefa ("doc: Move FIT into its own directory") moved the
documentation in doc/uImage.FIT to doc/usage/fit, subsequently all
documents and example sources have been converted to reStructuredText.
Fix (almost) all of the remaining occurrences of the old path and
filenames across the tree.
The exception is doc/uImage.FIT/command_syntax_extensions.txt which
apparently has been removed entirely, or at least I was unable to
locate where that document is now.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Add a new fwumdata tool to allows users to read, display, and modify FWU
(Firmware Update) metadata from Linux userspace. It provides functionality
similar to fw_printenv/fw_setenv but for FWU metadata. Users can view
metadata, change active/previous bank indices, modify bank states, and set
image acceptance flags. Configuration is done via fwumdata.config file.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Update the guidance for adding new tests to describe the subdirectory
structure instead of the numbering scheme.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Move the remaining 60 or so test files into an entry/ subdirectory.
These cover general entry types and features: entry args, fill, text,
env, compress, replace, template, collection, ELF, overlap, listing,
sections, symlink, TEE OS, and other miscellaneous entries. Drop the
numeric prefixes and update all references.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Move about 20 test files for vendor-specific platform support (TI, NXP
i.MX, Renesas R-Car, Rockchip, PowerPC MPC85xx) into a vendor/
subdirectory. Drop the numeric prefixes and update all references.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Move about 10 test files for ChromeOS entries (GBB, vblock, FMAP)
into a cros/ subdirectory. Drop the numeric prefixes and update all
references.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Move about 50 test files related to basic layout, packing, alignment,
sections, and image structure into a pack/ subdirectory. Drop the
numeric prefixes from the filenames and update all references in
ftest.py, entry_test.py, and binman_tests.rst
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Long ago we took the Linux Kernel documentation about adding a
Signed-off-by line and adjusted it slightly for how we organized things.
In 2003 Linus clarified the intent and then re-worded what the name
portion of the Signed-off-by line can be. Mirror that change here.
Link: https://git.kernel.org/torvalds/c/d4563201f33a
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
- We already have good custodian documentation for patchwork, add a
reference and then link to it here.
- Add a reference to the existing b4 documentation, and reference it
here.
- Note and link to patchwork integration, am/shazam and ty features of
b4 as these are the most likely useful portions. Be specific about
keeping the default ${summary} as that includes important information.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Make use of an anonymous reference for the external link here, per rST
best practices.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Rather than pointing at the source code for b4, point the the official
documentation. Also, use an anonymous reference for the link, per rST
best practices.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Move the "Custodians" section to be after the "Review Process, Git Tags"
section, in preparation for more re-organization.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
As seen with commit d503633a36 ("Revert "doc: board: starfive: update
jh7110 common description""), it has not always been clear what is and
isn't allowed by custodians, and what the expectations are. To prevent
further unintentional conflicts, document the limited cases where
custodians are allowed to modify patches directly, and how to do that.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Now that we have two items here, rework this slightly to be using bullet
points, and so easier to expand on.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
We have a long block about the expectations and feedback about a patch
applying, or not, as part of the Custodian workflow. Move this to the
Custodians section from the Workflow of a custodian section.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Add a paragraph explaining that in addition to the requirements.txt
for test/py/test.py itself, users may need to install additional python
packages depending on the U-Boot configuration being built.
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org> # sandbox
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Our last sync with the kernel was 5.1.
We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.
This is an attempt to sync up Makefiles to 6.1.
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call for the bump to 5.1,
so we are following the same guidelines here.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>a #rebased on -next
The option should be 'net_lwip' and not 'net lwip' (see all usage of it
in the test code base).
Fixes: 2bac578c5a ("test: allow multiple config options in buildconfigspec")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Add the _EXTRA variants of U_BOOT_BUILD_DIR and U_BOOT_RESULT_DIR to the
list of environment variables set for hook scripts.
These were added in commit 8f2a9fa7d6 ("test: Support testing with two
board-builds") but were not documented.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Fix the names of environment variables set for hook scripts. These
have a U_BOOT_ prefix, not UBOOT_.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Fix typo: `s/u-boot-test-flash1/u-boot-test-flash/`. The correct name of
the script doesn't have a "1" in it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add missing dependencies to the pytest usage documentation and correct
the device tree compiler package name from 'dtc' to 'device-tree-compiler'.
This ensures users have the complete list of dependencies needed to run
the pytest test suite without errors.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add extension_overlay_addr description to the list of environment
variables that can be useful during the standard boot.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Now that extension support has been added to extlinux and efi bootmeths
we can remove this line from the TODO list.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Add test cases to validate FDT and TPM eventlog handoff from TF-A
and OP-TEE via bloblist.
For FDT, the nodes 'reserved-memory' and 'firmware' appended by
OP-TEE indicates a successful handoff.
For TPM eventlog, the events 'SECURE_RT_EL3', 'SECURE_RT_EL1_OPTEE'
and 'SECURE_RT_EL1_OPTEE_EXTRA1' created by TF-A indicates a
successful handoff.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
This patch documents the newly added SPL_OS_BOOT_SECURE option that
enables authenticated boot in falcon mode.
The document provides steps for using secure falcon mode on ARM64 taking
TI's AM62x EVM as an example.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
