FIELD_GET() macro is used during EMAC clock source selection
for better code readability and maintainability.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Fix the incorrect bit masking and bit shift used to compute EMAC
control which in turn is used to select EMAC clock from EMAC
source A or B.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Update the driver to enable or disable the SDMMC clock via
clock driver model API instead of doing it in the driver itself.
This allows for scalability of the driver for various SoCFPGA
devices.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Update Agilex clock driver to support enabling or disabling
the peripheral clocks via clock driver model APIs.
The caller will pass the clock ID to this driver and the driver
will then proceed to manipulate the desired bit in the Agilex clock
manager peripheral PLL register based on the given clock ID.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
When the data cache (dcache) is disabled, calling related
status functions can lead to compilation errors due to
undefined references.
Adding a !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) check before
invoking dcache_status() (used in common/memsize.c:get_ram_size())
and mmu_status() (from arch/arm/include/asm/io.h).
Without this check, builds with dcache disabled will fail to compile.
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Adding the dcache flushing and invalidation in the smc_send_mailbox()
At the same time replace the use of u64 with uintptr_t to ensure
compatibility across different architectures and correct the
pointer arithmetic for buffer end address calculation.
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Linux kernel will fail to boot due to exceeding timeout trying to
probe I3C device.
Increasing the watchdog timeout 30 seconds will give enough time for
Linux to probe the I3C device and will be able to boot up successfully.
User is expected to fine tune the watchdog timeout for the complete
boot in production.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
The QSPI mailbox API function declarations (mbox_qspi_close and
mbox_qspi_open) in mailbox_s10.h were guarded by CONFIG_CADENCE_QSPI
preprocessor conditional. This prevented their prototypes from being
visible to code that may use the stub implementations when
CONFIG_CADENCE_QSPI is disabled.
Remove the CONFIG_CADENCE_QSPI preprocessor conditional so these functions
are always declared, regardless of the configuration. This avoids potential
build or linkage errors when stubs are used.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Agilex5 FPGA switch section in the handoff data is larger by 32 bytes
than the default value as these extra sections contains I3C0 and I3C1
register offsets and values with 4 bytes each.
This requires 4 more times of reading the FPGA switch section of the
handoff data to fully populate the handoff data table in the memory
during runtime.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Bit 3 of the seq2core register is no longer set to indicate
calibration completion. Instead, added polling of the seq2core
register until it reads 0b00000111, signaling that the Nios
processor has started the calibration process.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Compatibility check of IOSSM mailbox with U-Boot is performed
by verifying the mailbox specification version. If check fails,
appropriate error message is displayed.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Remove the current CONFIG_SYS_BOOTM_LEN in N5X VAB defconfig.
Previously, the size was set to 32MB, but due to larger kernel image,
64MB size is required. This 64MB configuration has been set as
default in the Kconfig.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
To ensure unintentional bugs occurring because of config changes
in master defconfig and its VAB variants, VAB defconfig files now
include the master defconfig and enable config values specific to
VAB functionality only.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
All SoCFPGA platforms are switching to CONFIG_WDT (driver
model for watchdog timer drivers) from CONFIG_HW_WATCHDOG. Status
of watchdog is enabled to assist with this switching.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
In order to circumvent CCU NOC issue in Agilex5, it is recommended
to disable cache allocation for reads. This prevents hang issues
caused by CCP (Common Cache Pipe) Fill Done FIFO overflow.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
While it is good that the "Licenses/" directory contains the text
for all licenses that are applicable to u-boot code, it is harder
to determine at a glance what the default and/or preferred license
is. While humans can look at the Licenses/README file, this is not
machine parseable, making it tricky for license detection tools to
automatically determine/report on the overall / aggregate u-boot
license.
The project previously had a top level COPYING file containing a
short blurb, followed by the GPL license text. This was removed
back in commit eca3aeb352 when
the "Licenses/" directory was introduced. For the benefit of
automated tools, it is helpful to retain a top level COPYING
file in the repository. Rather than duplicate the license text,
however, a symlink from the Licenses/gpl-2.0.txt file should
suffice.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Tom Rini <trini@konsulko.com>
`b4` is a commandline tool to make patch-based development easier.
Provide a .b4-config file to match U-Boot's development preference about
who is cc'd on patch submission.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
[trini: Reword slightly]
If reset property is missing in DT, then we get this warning:
designware_i2c@0: Can't get reset: -2
Avoid this by checking if reset DT property is present, first.
Fixes: 622597dee4 ("i2c: designware: add reset ctrl to driver")
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Pull request efi-2025-10-rc6
CI:
* https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/27745
Docs:
* Correct encodings for spl memory layout diagrams
* Suggest usage of KDOC_WERROR when building documentation
* Replace references to README.fdt-control
* Clarify precedence of environment locations
* Add documentation for the TI am335x_evm board
* Remove README.commands.itest
* Add a note about asking for feedback in the development process
UEFI:
* Cleanup UEFI Variables Kconfig menu
There are 3 options listed between choice/endchoice FILE/TEE/NO_STORE.
There is no reason to add other config with dependencies between
choice/endchoice because they can never be selected because they depends on
only that 3 options which can be selected.
That's why move additional configuration with dependency below choice
section.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Update documents 'README.fdt-control' reference to replacement 'control.rst':
doc/arch/nios2.rst
dts/Makefile
Also convert some adjacent pathname mentions to rST links where applicable
Fixes: 3e9fddfc4f "doc: Move devicetree control doc to rST"
Signed-off-by: E Shattow <e@freeshell.de>
It can be unclear to contributors what to do if they haven't gotten any
feedback on patches they have submitted. Add a sentence saying that if
they feel it's been too long without any comment, it's OK to reply
again.
Signed-off-by: Tom Rini <trini@konsulko.com>
The commit 284ef1bbce ("doc: memory: Add documentation for system
RAM") added documentation for U-Boot's memory usage along with diagrams
showcasing the SPL's memory usage. Although the SVGs for the diagrams
were improperly encoded.
Therefore, this patch fixes the older SVGs with one's with better
encoding and reduced size created using inkscape[1].
[1]: https://inkscape.org/
Reported-by: Alexander Dahl <ada@thorsis.com>
Fixes: 284ef1bbce ("doc: memory: Add documentation for system RAM")
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Since commit 5cf6a06a it is possible to have both text-based and
old-style C environment files. But so far the environment documentation
has not reflected this change. This commit fixes that.
Signed-off-by: Ricardo Simoes <ricardo.simoes@pt.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
We currently document this command in doc/usage/cmd/itest.rst and this
documentation is more comprehensive than the older README file. Delete
the older file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
When applying the patch that became commit a2d881f5bcd3 ("doc: memory:
Add documentation for system RAM") one of the diagrams was missed.
Re-add this missing file.
Reported-by: Adriano Carvalho <adrianocarvalho.pt@gmail.com>
Fixes: a2d881f5bcd3 doc: memory: Add documentation for system RAM
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
[trini: Take Neha's original svg and re-apply it]
Signed-off-by: Tom Rini <trini@konsulko.com>
Select SYSRESET on Vexpress64 to enable system reset to support other
features, such as capsule-on-disk. Select SYSRESET_PSCI if PSCI is
inferred from the firmware (via ARM_PSCI_FW).
Select ARM_SMCCC for Vexpress64 boards which in turn selects
ARM_PSCI_FW.
The sysreset uclass unconditionally implements a reset_cpu() function.
Remove the empty reset_cpu() in vexpress64 board code.
Signed-off-by: Debbie Horsfall <debbie.horsfall@arm.com>
Enable the DM_RNG virtio random number generator driver in order to
consume entropy within U-Boot. This allows U-Boot to inject entropy to the
kernel via UEFI, so the kernel can use that early, for instance for
address layout randomisation, or when the kernel does not provide an
entropy driver itself.
Signed-off-by: Debbie Horsfall <debbie.horsfall@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
U-Boot now stashes its bootstage buffer into a reserved memory region
whenever CONFIG_BOOTSTAGE_STASH is enabled, just before exiting to the
kernel. This allows a post boot parser to read a unified timeline
(SPL→U-Boot→Kernel→MCU/DSP) directly from DDR, enabling standardized
and repeatable boot-time profiling across releases and SoCs.
Change summary:
Call bootstage_stash_default() in announce_and_cleanup()
when CONFIG_BOOTSTAGE_STASH is set.
Reference boot-time parser utility:
https://github.com/v-singh1/boot-time-parser
Sample boot time report:
+--------------------------------------------------------------------+
am62xx-evm Boot Time Report
+--------------------------------------------------------------------+
Device Power On : 0 ms
SPL Time : 843 ms
U-Boot Time : 2173 ms
Kernel handoff time : 462 ms
Kernel Time : 2522 ms
Total Boot Time : 6000 ms
+--------------------------------------------------------------------+
+--------------------------------------------------------------------+
Bootloader and Kernel Boot Records
+--------------------------------------------------------------------+
BOOTSTAGE_AWAKE = 0 ms (+ 0 ms)
BOOTSTAGE_START_UBOOT_F = 843 ms (+ 0 ms)
BOOTSTAGE_ACCUM_DM_F = 843 ms (+ 0 ms)
BOOTSTAGE_START_UBOOT_R = 1951 ms (+1108 ms)
BOOTSTAGE_ACCUM_DM_R = 1951 ms (+ 0 ms)
BOOTSTAGE_NET_ETH_START = 2032 ms (+ 81 ms)
BOOTSTAGE_NET_ETH_INIT = 2053 ms (+ 21 ms)
BOOTSTAGE_MAIN_LOOP = 2055 ms (+ 2 ms)
BOOTSTAGE_START_MCU = 2661 ms (+606 ms)
BOOTSTAGE_BOOTM_START = 2959 ms (+298 ms)
BOOTSTAGE_RUN_OS = 3016 ms (+ 57 ms)
BOOTSTAGE_BOOTM_HANDOFF = 3016 ms (+ 0 ms)
BOOTSTAGE_KERNEL_START = 3478 ms (+462 ms)
BOOTSTAGE_KERNEL_END = 6000 ms (+2522 ms)
+--------------------------------------------------------------------+
+--------------------------------------------------------------------+
MCU Boot Records
+--------------------------------------------------------------------+
MCU_AWAKE = 2661 ms (+ 0 ms)
BOARD_PERIPHERALS_INIT = 2661 ms (+ 0 ms)
MAIN_TASK_CREATE = 2661 ms (+ 0 ms)
FIRST_TASK = 2662 ms (+ 1 ms)
DRIVERS_OPEN = 2662 ms (+ 0 ms)
BOARD_DRIVERS_OPEN = 2662 ms (+ 0 ms)
IPC_SYNC_FOR_LINUX = 6636 ms (+3974 ms)
IPC_REGISTER_CLIENT = 6636 ms (+ 0 ms)
IPC_SUSPEND_TASK = 6636 ms (+ 0 ms)
IPC_RECEIVE_TASK = 6636 ms (+ 0 ms)
IPC_SYNC_ALL = 6787 ms (+151 ms)
+--------------------------------------------------------------------+
Signed-off-by: Vishnu Singh <v-singh1@ti.com>
In order for the U-Boot specific tests we've added (along with the long
line test) to be run on ".env" files as well, we need to update the line
in the process function that starts to limit the file extensions that we
test on.
Signed-off-by: Tom Rini <trini@konsulko.com>
Rasmus Villemoes <ravi@prevas.dk> says:
This all started from me wondering "why does this standalone app end
up being so huge"? Oh, it essentially links in its own standard C
library to get strlen() and snprintf(). Which then led to asking "why
don't we export all those standard C functions when we have them
anyway?".
CI has chewed on these and seem happy - it was CI which told me about
the necessity of [1/9]: https://github.com/u-boot/u-boot/pull/813
Link: https://lore.kernel.org/r/20250919101002.568488-1-ravi@prevas.dk
There have been quite a few changes to _exports.h since the last
update of XF_VERSION, also before the previous patches in this series.
I doubt the mechanism is actually being used in practice, it is simply
too fragile: Not only does the list of exported functions depend on
.config, so with the same XF_VERSION the jump table entries could have
different offsets. But getting to the jump table itself from gd to
even call the ->get_version() is fragile, since offsetof(gd_t, jt)
can, and does, change. For example, as recently as commit
d990210702 ("global_data: Remove jump table in SPL").
One really must build one's standalone app against the proper U-Boot
version and config.h. But for good measure, do bump it now.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
The current list of exported functions lacks quite a few bog-standard C
library functions that we might as well expose, since U-Boot certainly
has them implemented anyway. There's no reason a standalone
application should have its own strlen() implementation or link in a
copy from some tiny libc.
For a customer's standalone app, this means it goes from 95K to 10K.
More importantly, we can ditch the custom toolchain including a
newlibc used to build the standalone app and just use the same
toolchain as used to build u-boot itself.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
The current list of exported functions is somewhat of a
mess. Reorganize them so that related functionality is kept together:
- console I/O: move vprintf next to printf and the getc/putc functions
- integer parsing: move the *strto* functions together
- standard string.h stuff: move memset() and strcpy() next to strcmp()
- time: move mdelay() next to udelay() and get_timer()
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
After finishing a later patch in this series, I discovered I had
neglected to update the list of declarations in exports.h to
match. But then I realized I wasn't the first to do that.
Use the existing mechanism and DRY it out.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
The !CONFIG_PHY_AQUANTIA defines were already superfluous since
_exports.h does have a CONFIG_PHY_AQUANTIA, so the entries never
existed. In fact, it couldn't have worked, because the defines would
affect both occurences of the mdio_get_current_dev identifier in the
EXPORT_FUNC(mdio_get_current_dev, struct mii_dev *,
mdio_get_current_dev, void)
so the C code would end up containing four copies of
gd->jt->dummy = dummy
but struct jt_funcs would not and does not have any 'dummy' member.
Now that nothing in _exports.h refers to dummy(), remove the empty
function.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
