This patch provides a driver for i.MX Messaging Unit (MU) using the
commom mailbox framework.
This is ported from Linux (v6.12.8) driver
drivers/mailbox/imx-mailbox.c. Its commit SHA is:
39d7d6177f0c ("mailbox: imx: use device name in interrupt name")
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Greg Malysa <malysagreg@gmail.com> says:
This series adds all of the supported peripheral drivers for the sc5xx
series of SoCs from Analog Devices and other drivers that are used by
the evaluation kits, such as a GPIO expander used by the EZLITE carrier
boards. This series passes gitlab CI tests.
Link: https://lore.kernel.org/r/20250226173150.13198-1-malysagreg@gmail.com
This adds the necessary dt-bindings and documentation to use the ADI
SC5xx pinctrl driver in a device tree. It is not yet available upstream
in the Linux kernel. Eventually, it will be moved there.
Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
My previous address is no longer accessible, but I will continue to be
involved in maintaining the ADI sc5xx platforms. This updates my contact
information and hopefully avoids bouncing emails from other developers.
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
So far only VBE-simple is implemented in U-Boot. This supports a single
image which can be updated in situ.
It is often necessary to support two images (A and B) so that the board
is not bricked if the update is interrupted or is bad.
In some cases, a non-updatable recovery image is desirable, so that the
board can be returned to a known-good state in the event of a serious
failure.
Introduce ABrec which provides these features. It supports three
independent images and the logic to select the desired one on boot.
While we are here, fix a debug message to indicate the function it
called. Provide a maintainers entry for VBE.
Note that fwupdated only supports VBE-simple so far, but supports for
ABrec will appear in time.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add initial support for Marvell PXA1908. The SoC has 4 Cortex-A53 cores,
a GC7000UL GPU and a variety of peripheral controllers.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/24323
Android:
- Fix kcmdline null pointer dereference (reported by coverity and
multiple users)
- Move Igor to reviewers instead of maintainers for avb/ab
- Fix booting Android with AVB built-in, but disabled via
fastboot flash --disable-verity vbmeta vbmeta.img
Add a small utility for displaying some information about U-Boot and the
hardware it's running on in a similar fashion to the popular neofetch
tool for Linux [1].
While the output is meant to be useful, it should also be pleasing to
look at and perhaps entertaining. The ufetch command aims to bring this
to U-Boot, featuring a colorful ASCII art version of the U-Boot logo.
[1]: https://en.wikipedia.org/wiki/Neofetch
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8560-QRD
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add native support of the bootcount mechanism in the ZynqMP by
utilising internal PMU registers. The Persistent Global Storage
Registers of the Platform Management Unit can keep their value
during reboot cycles unless there is a POR reset, making them
appropriate for the bootcount mechanism.
Signed-off-by: Vasileios Amoiridis <vasileios.amoiridis@cern.ch>
Reviewed-by: Heiko Schocher <hs@denx.de>
Link: https://lore.kernel.org/r/20241105132744.1572759-2-vassilisamir@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Sometimes this breaks, so add a build to keep it working. Since sandbox
enables a lot of options, it is a good board to use. The new config is
created simply by copying the existing sandbox and turning off CMDLINE
Once we have tests for non-CMDLINE operation, this can be adjusted to
run those tests.
Create a new build which will be picked up by CI. Update the maintainer
entry as well.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
I'd like to get Cc'ed to u-boot's SPI NOR patches to help review them.
The ultimate goal is to have an aligned approach in u-boot and linux.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Patrick Rudolph <patrick.rudolph@9elements.com> says:
Based on the existing work done by Simon Glass this series adds
support for booting aarch64 devices using ACPI only.
As first target QEMU SBSA support is added, which relies on ACPI
only to boot an OS. As secondary target the Raspberry Pi4 was used,
which is broadly available and allows easy testing of the proposed
solution.
The series is split into ACPI cleanups and code movements, adding
Arm specific ACPI tables and finally SoC and mainboard related
changes to boot a Linux on the QEMU SBSA and RPi4. Currently only the
mandatory ACPI tables are supported, allowing to boot into Linux
without errors.
The QEMU SBSA support is feature complete and provides the same
functionality as the EDK2 implementation.
The changes were tested on real hardware as well on QEMU v9.0:
qemu-system-aarch64 -machine sbsa-ref -nographic -cpu cortex-a57 \
-pflash secure-world.rom \
-pflash unsecure-world.rom
qemu-system-aarch64 -machine raspi4b -kernel u-boot.bin -cpu cortex-a72 \
-smp 4 -m 2G -drive file=raspbian.img,format=raw,index=0 \
-dtb bcm2711-rpi-4-b.dtb -nographic
Tested against FWTS V24.03.00.
Known issues:
- The QEMU rpi4 support is currently limited as it doesn't emulate PCI,
USB or ethernet devices!
- The SMP bringup doesn't work on RPi4, but works in QEMU (Possibly
cache related).
- PCI on RPI4 isn't working on real hardware since the pcie_brcmstb
Linux kernel module doesn't support ACPI yet.
Link: https://lore.kernel.org/r/20241023132116.970117-1-patrick.rudolph@9elements.com
Rename 'ahci_mvebu' to 'ahci_generic' and select it by default.
The AHCI driver contains no SoC specific code and only expects the
base address to be passed, thus rename it to ahci_generic and add the
DT compatible string "generic-ahci".
Update existing defconfigs to use the new Kconfig name as well.
TEST: Booted on QEMU sbsa using the generic-ahci node.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Tony Dinh <mibodhi@gmail.com>
Siddharth Vadapalli <s-vadapalli@ti.com> says:
Hello,
This series adds support for the Cadence PCIe controller on TI's K3
family of SoCs to which the J7200 SoC belongs. The driver is an adaptation
of the Linux driver (drivers/pci/controller/cadence/pci-j721e.c) and has
been implemented specifically for Root-Complex mode of operation on the
J7200 SoC. A minor set of changes will be sufficient to support other K3
SoCs as well with plans to implement it in the near future.
Link: https://lore.kernel.org/r/20241014053924.4027491-1-s-vadapalli@ti.com
Add support for the Cadence PCIe Controller present on TI's K3 SoCs.
This driver is an adaptation of the Linux driver.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Provide a short description of how tests work, why they are so critical
and how to resolve gaps in Binman's test coverage.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Add new section for USB TypeC Port Manager (TCPM) support, which
is needed to figure out cable orientation of USB-C plus and to do
USB PD communication.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Marek Vasut <marex@denx.de>
Add myself as a maintainer for the lwIP network stack integration code
and network commands as well as the sandbox ethernet driver for lwIP.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Oliver Gaskell <Oliver.Gaskell@analog.com> says:
ADSP-SC5xx is a series of ARM-based DSPs.
This comprises the armv7 based SC57x, SC58x and SC594 series, and the
armv8 based SC598.
This patch series includes configurations, init code, and minimal DTs
to enable Analog Devices' evaluation boards for these SoCs to boot
through SPL and into U-Boot Proper, as well as devicetree schemas for
the added DTs.
This patch series depends on ("arm: Add Analog Devices SC5xx Machine
Type") (https://lists.denx.de/pipermail/u-boot/2024-April/552043.html)
Adds minimal device tree for Analog Devices' SC573-EZKIT board and
common files for the SC57x/SC5xx family.
This also adds all sc5* devicetrees to ARM SC5XX in MAINTAINERS, and
adds the ADSP Linux mailing list as the list for ARM SC5XX.
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Introduce a defconfig for the RB3 Gen 2 and other QCM6490 boards with a
dedicated uefi partition. These can replace EDK2 entirely with U-Boot.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
